Latest FOG 0.33b
-
fabritrento,
What is the error that is given? Are you sure it’s ext4 and not LVM?
-
[quote=“ccmiens, post: 22385, member: 2951”]Hi,
How to update r1170 -> r1185?
Uninstall and reinstall all or simply extract files of new version
Thanks[/quote]You can do this is multiple ways.
First method, if you downloaded thru svn:
Go into the directory where you placed fog perform the command svn update and reinstall. (It will upgrade, not perform brand new install.)
For example: /home/user/trunk
[code]cd ~/trunk
svn update
cd bin
./install.sh[/code]My tarball is updated to 1185, just download it and run the installer (again it will upgrade.)
[code]wget --no-check-certificate https://mastacontrola.com/fog_0.33b.tar.bz2
tar -xjf fog_0.33b.tar.bz2
cd fog_0.33b/bin
./install.sh[/code]That should do it.
-
r1186 fixes ping issues if you have FOG_HOST_LOOKUP on.
-
I’m on revision 1185. Multipartition restore isn’t working, I tried RAW and it reboots when it starts to image (no error I could see). Anyone with multipartition/raw working?
-
I will give it a shot joacliba, but as you’re aware, it will take a while. I have to upload a raw image, then see where it’s erroring on the restore.
-
Oh, sorry, I have explained badly:
[LIST]
[]Multipartition, single disk --> Backup seems ok. [B]Restore doesn’t work[/B].
[]Raw --> Backup doesn’t work.
[/LIST]
I prefer “multipartition, single disk” but I was just testing “raw” and I found that it doesn’t work too. -
I understood that already. I just couldn’t do a raw restore test without a raw image to test with.
-
On RAW fails on upload, that is what I tried to say. I don’t know if deploy works or not, because I can’t make the backup.
-
AH, I got you now. Looking into it as we speak.
-
Ok, thank you!
The other problem I’m trying to explain is with the “multipartition, single disk” option, it uploads well, but fails on deploy.
-
Figured out the RAW upload issue. It starts the upload but then promptly fails.
I set the upload parameters properly (the part that performs the cloning) But the placement of where the files need to go during the process was all wrong. I was just telling it to write the data to the little 127MB ram disk rather than actually write it to the harddrive, to which it would promply fail and cause the system to restart. Rebuilding init.gz as we speak and will post with update.
Next test,
Can you be more specific with your multipartition, single disk option? Which OS? I’ve been testing with Windows 7, Windows 8, Windows 8.1, Linux, and Windows XP and haven’t had any issues. I do believe there could be an issue, but don’t know the details of your specific setup.
-
Or, are you saying deploying multicast job for multipart images is broken, I haven’t tested that part yet.
-
r1187 released to fix RAW upload issue.
-
My disk has the following partitions:
[LIST=1]
[]NTFS (no OS installed, future windows 7).
[]ext4 --> / of ubuntu 12.04
[]Extended:
[LIST=1]
[]ext4 --> /home of ubuntu 12.04
[*]swap partition.
[/LIST]
[/LIST]
The image is Linux(50) and multipartition single disk (I didn’t try multicast).All the upload process seems to be ok, all partitions were backed.
When I try to deploy, no errors are showed on screen, it reboots without do nothing. On previous revisions deploy worked correctly, the problem was on upload. Now upload seems to be ok, deploy not. -
In the image name you’re using fog this system does it contain the file d1p1 partition?
-
I think yes, but I can’t confirm until tomorrow, the fog server is in my institute.
Thank you and good night!
-
r1189 released.
Fixes killing of snapin-tasks generated by imaging tasks not working properly. Can successfully kill.
Also brings searching of tasks. This means all tasks. You can search, so far, by task name, task states, task types, hostnames, and macs. Will add more with enough time.
Hope you all enjoy.
-
[quote=“Tom Elliott, post: 22388, member: 7271”]fabritrento,
What is the error that is given? Are you sure it’s ext4 and not LVM?[/quote]
yes ext4, the error appears in partclone gray screen for 1 second… i cannot read… but seems that don’uses partclone.extfs but partclone.ntfs. the part with blkid is working and present?
-
[quote=“fabritrento, post: 22387, member: 21607”]uploading a disk from a pc with 3 partition i get this error:
first partition is ntfs with windows xp
second is eth4 with ubuntu 13.10
third is linux-swap.1st and 3rd is copyed ok on fog server, but second gives a error, seems that try to copy as ntfs instead as ext4.
this bug is urgent must be fixed[/quote]
with r1189 now i tryed to to a fast wipe before.
the error gived by client is:
(partclone gray screen):
/dev/sda1 is mounted at …
error!/dev/sda2 is mounted at …
error!/dev/sda3 is mounted at …
error!after this first fail of download , if i restart the same image download with a new download command on the web gui (same pc) the download starts… and finish but the grub installation don’t work, i must chroot the pc and do grub-install /dev/sda
-
I am a little confused,
[quote=“fabritrento, post: 22429, member: 21607”]
(partclone gray screen):
/dev/sda1 is mounted at …
error!/dev/sda2 is mounted at …
error!/dev/sda3 is mounted at …
error!
[/quote]There’s no more detail than just error?
[quote=“fabritrento, post: 22429, member: 21607”]
after this first fail of download
[/quote]
What do you mean by after the first download, weren’t you just doing a Wipe Task?[quote=“fabritrento, post: 22429, member: 21607”]
if i restart the same image download with a new download command on the web gui (same pc) the download starts… and finish but the grub installation don’t work, i must chroot the pc and do grub-install /dev/sda[/quote]Download jobs of the system, particularly pertaining to Grub, have never seemed to work. I’m currently trying with count=62 rather than count=63 on the mbr recovery. This probably means you’ll need to reupload the job first to see if it works. It may even be simpler than this. That said, I don’t think grub and mbr together worked properly and we haven’t come up with a good fix to this.
While I can understand the need to image such systems with multipartition, my goals for right now are to get the essentials (the things more people use) working properly. Windows 7, Windows XP, Windows 8/8.1, and Linux. Not multiboot systems. While I am trying to get this working, it’s also set me behind in getting other areas actually working.
Right now I’m trying to figure out why I need to use parted after reloading the mbr/partition table. The partition sizes should be created, with the only exception being on resizable images. Resizable images should need the partitions directly told as we want to be able to use the full size of the disk. MPS/MPA should not need to have their partition tables re-established as we recover the original partition table. Just my thoughts.
I am not saying I won’t try to get this fixed, I’m just saying I’m busy on other areas first.
