Latest FOG 0.33b
-
It was deliberate.
I’m setting the “layPartSize” to 99%.
The reason for this is because:
Some drives like 100% set, others don’t.
Some drives like exact drive size set, others don’t.Some drives don’t like 100% set AND don’t like exact drive size set, others don’t really care.
However, I haven’t seen any issues with any drives being set to 99%.
Yes you loose a little bit of space, but you can extend it later on.
-
Is anyone else unable to deploy via multicast? I get to the PartClone screen, and it stops there at “restoring image to device”. It’s the first I’ve attempted multicast in 0.33b, so I’m not sure if it’s just me or if it’s a legit issue. Deploying the same image via unicast works. The image is a Win 7 image, set to single partition. Verified using rev. 1180
-
What’s the error logs look like?
-
Is FOGMulticastManager service running?
-
r1184 released.
More location tweaks. Editing should work. It’s not perfect but I think I’m getting there.
Suggestions and some code tests are welcome to make getting it complete that much faster.
-
ArchFan,
I only ask those questions because I’m currently multicasting a job and all worked perfectly.
-
[quote=“Tom Elliott, post: 22379, member: 7271”]ArchFan,
I only ask those questions because I’m currently multicasting a job and all worked perfectly.[/quote]
It doesn’t look like FOGMulticastManager service was running. For some reason, attempting to start, stop, or restart the service using sudo initially failed. Typing /opt/fog/service/FOGMulticastManager/FOGMulticastManager seems to have resolved the issue, and I can now start, stop, and restart the service. Multicast then works as expected
-
multicast doesn’t seem to be working for me, no matter how i queue the task, tried from list all hosts using deploy, tried from group multicast, tried task management and list all group, multicast - it is creating seperate multicast tasks for each host :-S
-
Are you talking the tasks themselves, or the udp-sender?
-
To answer the log question, there were no files in /opt/fog/log, and none of the /var/log files showed anything other than something about not defining a timezone. Typing /opt/fog/service/FOGMulticastManager/FOGMulticastManager did give me quite a few PHP Warnings. I don’t know what’s significant
PHP Warning: fopen(): Filename cannot be empty in /opt/fog/service/common/functions.php on line 10
PHP Warning: date(): It is not safe to rely on the system’s timezone settings. You are required to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone ‘UTC’ for now, but please set date.timezone to select your timezone. in /opt/fog/service/common/functions.php on line 19
PHP Warning: fopen(/dev/tty2): failed to open stream: Permission denied in /opt/fog/service/common/functions.php on line 10
PHP Warning: fopen(/opt/fog/log/multicast.log): failed to open stream: Permission denied in /opt/fog/service/common/functions.php on line 26
PHP Warning: Missing argument 2 for out(), called in /opt/fog/service/common/functions.php on line 28 and defined in /opt/fog/service/common/functions.php on line 6 -
Found the issue Lee was reporting.
r1185 released. Should PROPERLY NOW, fix group/individual taskings for multicast jobs.
Creates new multicast task for individual host multicast deploy.
Creates Group multicast task based on the Group->Host->image being the same.
-
Hi,
How to update r1170 -> r1185?
Uninstall and reinstall all or simply extract files of new version.
Thanks -
[quote=“Tom Elliott, post: 22384, member: 7271”]Found the issue Lee was reporting.
r1185 released. Should PROPERLY NOW, fix group/individual taskings for multicast jobs.
Creates new multicast task for individual host multicast deploy.
Creates Group multicast task based on the Group->Host->image being the same.[/quote]
today i tested multicast: don’t work.
i have 2 group: one of 26 pc another of 16 pc.
the pcs in second group is included also in first group.
clicked on list all group, multicast (second green icon with 2 down-rows)
the pc boots and starts partclone, that remain grey and wait to infinite.
here some logs:
administrator@fog:~/fog_0.33b/bin$ ps -ef|grep fog
avahi 507 1 0 Jan31 ? 00:00:07 avahi-daemon: running [fog.local]
root 30590 1 0 11:19 ? 00:00:01 /usr/bin/php -q /opt/fog/service/FOGMulticastManager/FOGMulticastManager
root 30600 1 0 11:19 ? 00:00:00 /usr/bin/php -q /opt/fog/service/FOGImageReplicator/FOGImageReplicator
root 30612 1 0 11:19 ? 00:00:00 /usr/bin/php -q /opt/fog/service/FOGTaskScheduler/FOGTaskScheduler
1000 31110 26061 0 11:24 pts/1 00:00:00 grep --color=auto fog
administrator@fog:~/fog_0.33b/bin$administrator@fog:/opt/fog/log$ vi multicast.log
[02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA is new!
[02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA image file found.
[02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA 40 clients found.
[02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA sending on base port: 27198
[02-03-14 11:28:18 am] CMD: cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 40 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;
[02-03-14 11:28:18 am] | [02-03-14 11:28:18 am] Task (50) LAB-CA has started.
[02-03-14 11:28:28 am] * [02-03-14 11:28:28 am] Checking if I am the group manager.
[02-03-14 11:28:29 am] * [02-03-14 11:28:29 am] I am the group manager.
[02-03-14 11:28:29 am] | [02-03-14 11:28:29 am] Task (50) LAB-CA is no longer running.
[02-03-14 11:28:29 am] | [02-03-14 11:28:29 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
[02-03-14 11:28:39 am] * [02-03-14 11:28:39 am] Checking if I am the group manager.
[02-03-14 11:28:40 am] * [02-03-14 11:28:40 am] I am the group manager.
[02-03-14 11:28:40 am] | [02-03-14 11:28:40 am] Task (50) LAB-CA is no longer running.
[02-03-14 11:28:40 am] | [02-03-14 11:28:40 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
[02-03-14 11:28:50 am] * [02-03-14 11:28:50 am] Checking if I am the group manager.
[02-03-14 11:28:51 am] * [02-03-14 11:28:51 am] I am the group manager.
[02-03-14 11:28:51 am] | [02-03-14 11:28:51 am] Task (50) LAB-CA is no longer running.
[02-03-14 11:28:51 am] | [02-03-14 11:28:51 am] Task (50) LAB-CA will not be cleaned yet (5 min delay).
[02-03-14 11:29:01 am] * [02-03-14 11:29:01 am] Checking if I am the group manager.administrator@fog:/var/log/apache2$ vi error.log
[Mon Feb 03 11:35:19 2014] [error] [client 192.168.0.30] PHP Fatal error: Call to a member function isValid() on a non-object in /var/www/fog/service/servicemodule-active.php on line 11I retryed deleting the 26 pc group, and restart the multicast for 16pc group:
[02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA is new!
[02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA image file found.
[02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA 56 clients found.
[02-03-14 11:42:09 am] | [02-03-14 11:42:09 am] Task (50) LAB-CA sending on base port: 27198
[02-03-14 11:42:09 am] CMD: cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;
[02-03-14 11:42:10 am] | [02-03-14 11:42:10 am] Task (50) LAB-CA has started.
[02-03-14 11:42:20 am] * [02-03-14 11:42:20 am] Checking if I am the group manager.
[02-03-14 11:42:21 am] * [02-03-14 11:42:21 am] I am the group manager.Udp-sender 20120424
Using mcast address 232.168.0.3
UDP sender for (stdin) at 192.168.0.3 on eth0
Broadcasting control to 224.0.0.1
New connection from 192.168.0.142 (#0) 00000009
New connection from 192.168.0.43 (#1) 00000009
New connection from 192.168.0.141 (#2) 00000009
New connection from 192.168.0.113 (#3) 00000009
New connection from 192.168.0.133 (#4) 00000009
New connection from 192.168.0.117 (#5) 00000009
New connection from 192.168.0.121 (#6) 00000009
New connection from 192.168.0.122 (#7) 00000009
New connection from 192.168.0.123 (#8) 00000009
New connection from 192.168.0.137 (#9) 00000009
New connection from 192.168.0.138 (#10) 00000009
New connection from 192.168.0.136 (#11) 00000009
New connection from 192.168.0.127 (#12) 00000009
New connection from 192.168.0.118 (#13) 00000009
New connection from 192.168.0.132 (#14) 00000009administrator@fog:/opt/fog/log$ ps -ef|grep udp
root 1053 30590 0 11:42 ? 00:00:00 sh -c exec cat “/images//labinfociro/d1p1.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p2.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;cat “/images//labinfociro/d1p3.img”|/usr/local/sbin/udp-sender --min-receivers 56 --portbase 27198 --interface eth0 --full-duplex --ttl 32 --nokbd;i see that LAB-CA is used, but this group is deleted and don’t exist anymore. the group name is “test”.
i think that there is some inconsistences into db, expect --min-receivers 16 and NOT 56 (±*/ errors?)
-
uploading a disk from a pc with 3 partition i get this error:
first partition is ntfs with windows xp
second is eth4 with ubuntu 13.10
third is linux-swap.1st and 3rd is copyed ok on fog server, but second gives a error, seems that try to copy as ntfs instead as ext4.
this bug is urgent must be fixed
-
fabritrento,
What is the error that is given? Are you sure it’s ext4 and not LVM?
-
[quote=“ccmiens, post: 22385, member: 2951”]Hi,
How to update r1170 -> r1185?
Uninstall and reinstall all or simply extract files of new version
Thanks[/quote]You can do this is multiple ways.
First method, if you downloaded thru svn:
Go into the directory where you placed fog perform the command svn update and reinstall. (It will upgrade, not perform brand new install.)
For example: /home/user/trunk
[code]cd ~/trunk
svn update
cd bin
./install.sh[/code]My tarball is updated to 1185, just download it and run the installer (again it will upgrade.)
[code]wget --no-check-certificate https://mastacontrola.com/fog_0.33b.tar.bz2
tar -xjf fog_0.33b.tar.bz2
cd fog_0.33b/bin
./install.sh[/code]That should do it.
-
r1186 fixes ping issues if you have FOG_HOST_LOOKUP on.
-
I’m on revision 1185. Multipartition restore isn’t working, I tried RAW and it reboots when it starts to image (no error I could see). Anyone with multipartition/raw working?
-
I will give it a shot joacliba, but as you’re aware, it will take a while. I have to upload a raw image, then see where it’s erroring on the restore.
-
Oh, sorry, I have explained badly:
[LIST]
[]Multipartition, single disk --> Backup seems ok. [B]Restore doesn’t work[/B].
[]Raw --> Backup doesn’t work.
[/LIST]
I prefer “multipartition, single disk” but I was just testing “raw” and I found that it doesn’t work too.
