Latest FOG 0.33b

BigMan99211

No. I haven’t made any changes.

Junkhacker

@BigMan99211 post a copy (remove your IP addresses if you care to) of the results you get from this url
(your-fog-server-address)/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00

BigMan99211

[CODE]#!ipxe
colour --rgb 0xFF6600 2
cpair --foreground 7 --background 2 2
console --picture http://10.20.0.225/fog/service/ipxe/bg.png
:MENU
menu
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reg Quick Registration and Inventory
item fog.reginput Perform Full Host Registration and Inventory
item fog.sysinfo Client System Information
item fog.debug Debug Mode
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || exit ||
goto MENU
:fog.memtest
kernel fog/memtest/memtest bootfile=http://10.20.0.225/fog/service/ipxe/boot.php?mac=${net0/mac} fastboot
boot ||
:fog.reg
kernel fog/kernel/bzImage bootfile=http://10.20.0.225/fog/service/ipxe/boot.php fastboot
imgfetch fog/images/init.gz
imgargs fog/kernel/bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= keymap= web=10.20.0.225/fog/ loglevel=4 consoleblank=0 mode=autoreg
boot ||
goto MENU
:fog.reginput
kernel fog/kernel/bzImage bootfile=http://10.20.0.225/fog/service/ipxe/boot.php fastboot
imgfetch fog/images/init.gz
imgargs fog/kernel/bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= keymap= web=10.20.0.225/fog/ loglevel=4 consoleblank=0 mode=manreg
boot ||
goto MENU
:fog.sysinfo
kernel fog/kernel/bzImage bootfile=http://10.20.0.225/fog/service/ipxe/boot.php fastboot
imgfetch fog/images/init.gz
imgargs fog/kernel/bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= keymap= web=10.20.0.225/fog/ loglevel=4 consoleblank=0 mode=sysinfo
boot ||
goot MENU
:fog.debug
kernel fog/kernel/bzImage bootfile=http://10.20.0.225/fog/service/ipxe/boot.php fastboot
imgfetch fog/images/init.gz
imgargs fog/kernel/bzImage root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= keymap= web=10.20.0.225/fog/ loglevel=4 consoleblank=0 mode=onlydebug
boot ||
goto MENU
autoboot[/CODE]

ArchFan

[quote=“BigMan99211, post: 23619, member: 21932”]What has changed since version 1256, that would stop “Full Host Registration…” from running? It worked fine 2 days ago, now it’s just bypassing and trying to boot to the hard drive…[/quote]

I have the same issue, except that any time I choose anything from the iPXE menu, it boots to HDD regardless. I thought it was just me, so I was going to try a fresh install. I didn’t customize any of the configs, etc other than adding the MYSQL passwords to the 2 required files

Tom Elliott

Change your FOG Configuration files
FOG Configuration (?) Icon
FOG Settings
Change the areas that have fog/memtest/memtest, fog/images/init.gz, fog/kernel/bzImage to say only memtest, init.gz, bzImage respectively.

Junkhacker

This post is deleted!

Junkhacker

[quote=“ArchFan, post: 23627, member: 19266”] … the 2 required files[/quote]

2?

Tom Elliott

I don’t know any more

I’ve since changed it to one required file.

/var/www/{fog,html/fog}/commons/config.php

The other config.php just tells the FOG<SERVICENAME> files to point to the main config.php file.

BigMan99211

This is all i’m seeing in /var/www/fog/commons/config.php

[CODE]<?php
/*

FOG is a computer imaging solution.
Copyright 2007 Chuck Syperski & Jian Zhang
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see http://www.gnu.org/licenses/.

*/

/*

DATABASE VARIABLES

*/

define(‘DATABASE_TYPE’, ‘mysql’); // mysql or oracle
define(‘DATABASE_HOST’, ‘localhost’);
define(‘DATABASE_NAME’, ‘fog’);
define(‘DATABASE_USERNAME’, ‘root’);
define(‘DATABASE_PASSWORD’, ‘’);

/*

SYSTEM SERVICE VARIABLES

*/

define( “UDPSENDERPATH”, “/usr/local/sbin/udp-sender” );
define( “MULTICASTLOGPATH”, “/opt/fog/log/multicast.log” );
define( “MULTICASTDEVICEOUTPUT”, “/dev/tty2” );
define( “MULTICASTSLEEPTIME”, 10 );
define( “MULTICASTINTERFACE”, “eth0” );
define( “UDPSENDER_MAXWAIT”, null );
define( “LOGMAXSIZE”, “1000000” );

define( “REPLICATORLOGPATH”, “/opt/fog/log/fogreplicator.log” );
define( “REPLICATORDEVICEOUTPUT”, “/dev/tty3” );
define( “REPLICATORSLEEPTIME”, 600 );
define( “REPLICATORIFCONFIG”, “/sbin/ifconfig” );

define( “SCHEDULERLOGPATH”, “/opt/fog/log/fogscheduler.log” );
define( “SCHEDULERDEVICEOUTPUT”, “/dev/tty4” );
define( “SCHEDULERSLEEPTIME”, 60 );

/*

SYSTEM CONFIG VARIABLES

*/

require_once(‘system.php’);

/*

IMPORTANT NOTICE!
In order to make updating from version to version of fog easier, we have moved
most off these settings into the fog database. The only settings which are
active are the settings above. All settings below this message are transfered
to the fog database during schema update/installation. To modify these
settings please use the fog management portal.

*/

define(‘TFTP_HOST’, “10.20.0.225”);
define(‘TFTP_FTP_USERNAME’, “fog”);
define(‘TFTP_FTP_PASSWORD’, “cc9a0b7a329e856c1b8013dd254a2f8e”);
define(‘TFTP_PXE_CONFIG_DIR’, ‘/tftpboot/pxelinux.cfg/’);
define(‘TFTP_PXE_KERNEL_DIR’, ‘/tftpboot/fog/kernel/’);
define(‘PXE_KERNEL’, ‘bzImage’);
define(‘PXE_KERNEL_RAMDISK’,127000);
define(‘USE_SLOPPY_NAME_LOOKUPS’,true);
define(‘MEMTEST_KERNEL’, ‘memtest’);
define(‘PXE_IMAGE’, ‘init.gz’);
define(‘PXE_IMAGE_DNSADDRESS’, “”);
define(‘STORAGE_HOST’, “10.20.0.225”);
define(‘STORAGE_FTP_USERNAME’, “fog”);
define(‘STORAGE_FTP_PASSWORD’, “cc9a0b7a329e856c1b8013dd254a2f8e”);
define(‘STORAGE_DATADIR’, ‘/images/’);
define(‘STORAGE_DATADIR_UPLOAD’, ‘/images/dev/’);
define(‘STORAGE_BANDWIDTHPATH’, ‘/fog/status/bandwidth.php’);
define(‘UPLOADRESIZEPCT’,5);
define(‘WEB_HOST’, “10.20.0.225”);
define(‘WOL_HOST’, “10.20.0.225”);
define(‘WOL_PATH’, ‘/fog/wol/wol.php’);
define(‘WOL_INTERFACE’, “eth0”);
define(‘SNAPINDIR’, “/opt/fog/snapins/”);
define(‘QUEUESIZE’, ‘10’);
define(‘CHECKIN_TIMEOUT’,600);
define(‘USER_MINPASSLENGTH’,4);
define(‘USER_VALIDPASSCHARS’, ‘1234567890ABCDEFGHIJKLMNOPQRSTUVWZXYabcdefghijklmnopqrstuvwxyz_()^!#-’);
define(‘NFS_ETH_MONITOR’, “eth0”);
define(‘UDPCAST_INTERFACE’, “eth0”);
define(‘UDPCAST_STARTINGPORT’, 63100 ); // Must be an even number! recommended between 49152 to 65535
define(‘FOG_MULTICAST_MAX_SESSIONS’,64);
define(‘FOG_JPGRAPH_VERSION’, ‘2.3’);
define(‘FOG_REPORT_DIR’, ‘./reports/’);
define(‘FOG_UPLOADIGNOREPAGEHIBER’,true);
?>[/CODE]

Tom Elliott

What are you talking about?

Tom Elliott

[quote=“Tom Elliott, post: 23628, member: 7271”]Change your FOG Configuration files
FOG Configuration (?) Icon
FOG Settings
Change the areas that have fog/memtest/memtest, fog/images/init.gz, fog/kernel/bzImage to say only memtest, init.gz, bzImage respectively.[/quote]

Have you followed the above information I already stated?

BigMan99211

I guess I don’t understand your directions…

Junkhacker

in your fog configuration page, there are settings for the locations for the locations of
FOG_TFTP_PXE_KERNEL, which is currently fog/kernel/bzImage it needs to just be bzImage
FOG_MEMTEST_KERNEL, which needs to just be memtest
and FOG_PXE_BOOT_IMAGE, which needs to just be init.gz

no editing of php files, all from the web interface

BigMan99211

OK! Got it! Makes more sense now…

jbsclm

Confused
trying 1263, but getting int 18 boot fail as per the attached.[ATTACH=full]565[/ATTACH]

Oddly the ip address is missing from the http line.
I thought this would come from
/tftpboot/pxelinux.cfg/default
but that has the IP address in, and if I modify it the changes don’t appear, implying it is coming from somwhere else.
my fog ip is 192.168.3.11.
Any thoughts

[url=“/_imported_xf_attachments/0/565_boottest Clone.png?:”]boottest Clone.png[/url]

jbsclm

If I revert pxelinux.0 back to pxelinux.0.old it works.

I wonder what the difference is?

Junkhacker

according to Tom’s release notes on r1263, the i believe new pxelinux.0 is a custom compiled ipxe kernel instead of an pxelinux kernel. i suspect there is a flaw in the embedded ipxe config file.

jbsclm

One for Tom to look at methinks.

jbsclm

also task deploy of xp single partition seems broken, says checking disc, a couple of lines later it reboots, without ever having run partclone.

ArchFan

[quote=“Tom Elliott, post: 23631, member: 7271”]I don’t know any more

I’ve since changed it to one required file.

/var/www/{fog,html/fog}/commons/config.php

The other config.php just tells the FOG<SERVICENAME> files to point to the main config.php file.[/quote]

Thanks Tom, didn’t realize it had changed - I was referring to the 2 mentioned [URL=‘http://www.fogproject.org/wiki/index.php/Template:Updating_config_files_for_non-empty_MySQL_root_password’]here[/URL]. I’ll try the fix for the other issue. Thanks

Latest FOG 0.33b

177

12.2k

17.3k

155.4k