TFTP Open Timeout

[Gavin Behrens]

so it is proceesing the requests ok - try adding a simple task like mem test or inventory - should all work ok but to get it to boot local have a look at this [url]http://www.fogproject.org/wiki/index.php/Boot_looping_and_Chainloading[/url] - can you post the default file /tftpboot/pxelinux.cfg/default

[Tyler Wright]

Here is /tftpboot/pxelinux.cfg/default:

DEFAULT vesamenu.c32
MENU TITLE FOG Computer Cloning Solution
MENU BACKGROUND fog/bg.png
MENU MASTER PASSWD $1$0123456789
\n
menu color title 1;36;44 #ffffffff #00000000 std
\n
LABEL fog.local
localboot 0
MENU DEFAULT
MENU LABEL Boot from hard disk
TEXT HELP
Boot from the local hard drive.
If you are unsure, select this option.
ENDTEXT
\n
LABEL fog.memtest
kernel fog/memtest/memtest
MENU LABEL Run Memtest86+
TEXT HELP
Run Memtest86+ on the client computer.
ENDTEXT
\n
LABEL fog.reg
MENU LABEL Quick Host Registration and Inventory
TEXT HELP
Automatically register the client computer,
and perform a hardware inventory.
ENDTEXT
\n
LABEL fog.reginput
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= mode$
MENU LABEL Perform Full Host Registration and Inventory
TEXT HELP
Perform a full host registration on the client
computer, perform a hardware inventory, and
optionally image the host.
ENDTEXT
\n
LABEL fog.quickimage
MENU PASSWD $1$0123456789
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= mod$
MENU LABEL Quick Image
TEXT HELP
This mode will allow you to image this host quickly with
it’s default assigned image.
ENDTEXT
\n
LABEL fog.sysinfo
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= mod$
MENU LABEL Client System Information
TEXT HELP
View basic client information such as MAC address
and FOG compatibility.
ENDTEXT
LABEL fog.debug
MENU PASSWD $1$0123456789
kernel fog/kernel/bzImage
append initrd=fog/images/init.gz root=/dev/ram0 rw ramdisk_size=127000 ip=dhcp dns= mod$
MENU LABEL Debug Mode
TEXT HELP
Debug mode will load the boot image and load a prompt so
you can run any commands you wish.
ENDTEXT
\n
PROMPT 0
TIMEOUT 30\n

[Gavin Behrens]

just try updating PXELINUX as described [url]http://www.fogproject.org/wiki/index.php/Boot_looping_and_Chainloading[/url]

[Tyler Wright]

I did. It had no effect.

[Tyler Wright]

On the subnet where I have my Fog server setup, it PXE boots just fine. On any other subnet, it will not get a DHCP address which leads it to be unable to PXE boot.

[Gavin Behrens]

so if that subnet isn’t getting dhcp - is there a scope set on the windows box for that subnet with a pool set - is the pool exhausted ? check to see if the pool isn’t exhausted …

[Gavin Behrens]

i was under the impression it was getting an ip address ??? you syslog post [B]“sent /tftpboot/fog/bg.png to 10.120.100.41” [/B]

right ?[B][/B]

[Gavin Behrens]

also check to make sure you are able to route to your fog server …

[Gavin Behrens]

firewall rules ???

[Tyler Wright]

The pool is definitely not exhausted. If it boots to Windows, it gets its DHCP address.

Yes (to your second post).

In my internal network, there is no firewall whatsoever.

[Gavin Behrens]

tftp on fog ok - running confirmed
dhcp - giving addresses options 66&67 set ok
routing ok
firewall rules (any,any) nothing should be blocked …ok
try from the windows box (10.120.100.x subnet right?) command prompt tftp [I]foghost[/I] get pxelinux.0 ?

[Gavin Behrens]

sorry still won’t fix it anyways
the workstation in the pxe process isn’t being allocated an ip address but an up and running os can ?- can you post a screen shot?

[Tyler Wright]

On a Windows box in the 10.110.100.x subnet, the OS pulls this from my DHCP server:

DHCP Enabled: Yes
Autoconfiguration Enabled: Yes
IPv4 Address: 10.110.100.92
Subnet Mask: 255.255.254.0
Default Gateway: 10.110.100.254
DHCP Server: 10.200.200.3

However, if I PXE boot, it never gets DHCP so it doesn’t continue into PXE.

I use to use Alitirs and it worked just fine. We had its PXE server set to “Use the DHCP port.”

[Tyler Wright]

Here’s something else that is interesting:

When I’m booting a PC on the same subnet as my Fog server (10.200.200.203) and I choose to get IP information once I’m inside Fog, it shows that DHCP gave out the correct address.

It has to be something to do with my other PCs being outside of that subnet. We divide each lab into a different subnet so there’s no way that I can really join them all together.

[Tyler Wright]

Alright, somehow, I made progress today. I can now successfully PXE boot in two out of eight labs.

I’ve been attempting to upload an image and when it gets to mounting the NFS share, I get the error: Bad descriptor file and then it restarts. Once again, I’m lost.

[Tyler Wright]

I reinstalled Fog and put my DHCP server as the router’s address. This got me past the bad descriptor file error.

Now, I get: “RPC remote system error connection refused.”

Who knows if I’ll ever get this working. It’s just one error after another.

[wrench1975]

May Sound stupid but did you trying using

sudo stop tftpd-hpa
sudo start tftpd-hpa

in the terminal

[Lethal Kebab]

hey guys…

could possibly be unrelated… but…
we were having issues with TFTP Timeout when it came to subnets other than the one fog was on… it turns out the switch needed configuration to allow spanning subnets (not sure on exact terminology but 5 minutes after the network guy worked on the core switch, it was working).

the bad descriptor problem, I resolved by making sure that .mntcheck was in both the /images and in the /images/dev folder…

good luck… let us know how you go…

[Tom Elliott]

I think it’s something along the lines of ip-helper on the managed switches.

[Dragnous]

Had the same problem today.
Did this
[CODE]sudo stop tftpd-hpa
sudo start tftpd-hpa[/CODE]

and on ubuntu I disconnected the wired connection profile and reconnected and was fixed.