Setting up and building UDPCast...Failed!
-
I have editted the /opt/fog/service/etc/config.php allready, so the MYSQL_PASSWORD field is correct.
No, I’m not able to create any tasks. By the Host Managemant Page or by the Task Management Page, doesn’t make any difference.
Gr, Jos
-
I need more information to work off, than it’s not working.
You’re absolutely sure that the password is correct? Can you actually connect to the database using the password you’ve entered?
-
When I change the MYSQL_PASSWORD field in /var/www/fog/commons/config.php is something else, I am Unable to connect to database, when I browse to my Fog-site. So it must be correct, right?
I also checked password with the command:
mysql -u root -p<password> fog -h localhostHere I got a mysql prompt. No errors.
The only task, that seems to do anything is the ‘wake up computer’ task, but I can’t check this. Because my bios on the client (Windows 7) computer doesn’t have the wake-up function.
If you need more information, please let me know.
Gr, Jos
-
There are two config.php files.
The one in /var/www/fog/commons/config.php is correct as you are able to connect to your FOG Database. Your GUI is working perfectly. However, your /opt/fog/service/etc/config.php file controls the FOG Service files. These are what error’s you’re seeing in the ? ->Log Viewer area. Make sure the password is correct in this file. It may also require you to restart the FOG Services with:
[code]sudo service FOGMulticastManager restart; sudo service FOGScheduler restart; sudo service FOGImageReplicator restart[/code]Things should work after this from the LOG Viewer. However, the service files that I’m describing is not likely to fix your Task generation issue.
The task is reporting that it is unable to upload the file to your tftp server.
The task generation happens by ftping the 01-XX-XX-XX-XX-XX-XX file to the fog server in the location /tftpboot/pxelinux.cfg/
The XX’s will be replaced with the system’s MAC address.
You should verify that the fog username and password are correct as you stated you’ve already done. Make sure these are what is set in the ( ? )->FOG_TFTP_USERNAME and FOG_TFTP_PASSWORD as well as the Storage Node’s Management Username and Password fields from Storage Management->All Storage Nodes->Your storage node
Next, on the FOG Server, make sure the NFS, VSFTP, and tftp services are running on the system. You can verify that they are running with:
[code]sudo service portmap restart
sudo service nfs-kernel-server restart
sudo service vsftpd restart
sudo service tftpd-hpa restart[/code]Then try again. It’s about all I can think of without being able to remote into the system to actually take a look.
-
I did run the commands above. All went OK, only:
“sudo service portmap restart” …Failed!
portmap: Unreconized service
When I run:
sudo apt-get install portmap
I get a system message: rpcbind is used instead of portmap.
I have noticed that a setting in /var/www/fog/commons/config.php was not right. The host and user of MYSQL was not correct.
Now I have changed this. I don’t see any connection error in de FOG logfile.
I also noticed that if I change the TFTP-password to an not correct password. This screen appears when I choose an upload task:
[url]http://www.noordlaarderbos.nl/linux/fog_task_management5.png[/url]
When I choose the correct password, I still get this:
[url]http://www.noordlaarderbos.nl/linux/fog_task_management4.png[/url]
If you want to remote control my system, please sent me a email. to: jcdv @ home.nl
Gr, Jos
-
So for the portmap issue, it sounds like ubuntu switched from portmap to rpc.
Can you try:
[code]sudo service rpcbind restart
sudo service nfs-kernel-server restart[/code] -
I have tried it, same result.No errors btw.
My Ubuntu computer is not online all the time,only when I’m trying Fog or something else. The services are therefore (re-)started when booting the computer.
Gr, Jos
-
[quote=“Ubuntu_newby, post: 22668, member: 22075”]I have tried it, same result.No errors btw.
My Ubuntu computer is not online all the time,only when I’m trying Fog or something else. The services are therefore (re-)started when booting the computer.
Gr, Jos[/quote]
Be carful with your expectations there… There are some versions of Ubuntu that have problems with upstart jobs. Mainly the TFTP service being started before an ip address has been assigned to the machine.
What revision of Ubuntu did you use?
-
I use Ubuntu 13:10 desktop version on a PC.
People who use Linux always say that Linux is more stable than Windows. I’m starting to get my doubts.
The same version of Ubuntu I installed also as a VM in VMWare Workstation on a laptop and sometimes twice a restart is needed because it freezes during startup. Start the second time, it starts up without any problems/freezes.
Gr, Jos
-
Don’t have doubts, Ubuntu has gone through a lot of changes from 10.04 on, they change the look and feel from Gnome to Unity and that messed a LOT of things up, since then it has been in “patch mode” (that’s what I call it when users have to solve their own problems because of changes made to an OS).
I just wanted to make sure you weren’t on a troublesome revision. 13.04 is stable enough of a release you shouldn’t have issues because of OS problems, so we can write that off, for now.
Normally, after I have figured out the issues with the fog installer, I nuke my fog install and run it again. You never know where it hung last, if is finished setting up the user properly, etc.
You can manually install the services and configure them, but I only recommend this for advanced comfortable users.
At this point (since there is nothing on the server), wipe it, fresh install Ubuntu, install FOG.
-
I agree.
-
I am using Ubuntu now after some days using OpenSuse and CentOS. I was not happy with both linux-distributions. I have less trouble with Ubuntu.Ubuntu was more what I want to expect.
I have installed FOG now for at least 3 times. If you count the failed installations, it can be a number 13 times!
-
I understand you are frustrated, but trust me, if we can get a good clean install to work from, FOG will be your best friend.
You did the right thing in choosing Ubuntu, i feel it is the best for user friendliness. I have set up servers on CentOS with a fair share of problems, and OpenSuse is pretty much impossible at the moment (the pieces are there to an extent but they don’t work together, and every time I get close I crash my VM -.-).
-
[quote=“Jaymes Driver, post: 22706, member: 3582”]I understand you are frustrated, but trust me, if we can get a good clean install to work from, FOG will be your best friend.
You did the right thing in choosing Ubuntu, i feel it is the best for user friendliness. I have set up servers on CentOS with a fair share of problems, and OpenSuse is pretty much impossible at the moment (the pieces are there to an extent but they don’t work together, and every time I get close I crash my VM -.-).[/quote]
Well frustrated… That’s not too bad. I for one am happy with Ubuntu.
I follow a course on Linux, with a book with a DVD of OpenSUSE. I was tired of it quickly. After 15 years as a Windows administrator, I want to know some more Linux.
I put in any case with Ubuntu and it will work with FOG. Geukkig I get good help in this forum.
But to keep up with the Subject Do you have any good ideas?
-
Maybe I misunderstood, your last post only touched base on how many times you installed FOG, there weren’t any issues posted.
-
The installation of Fog went correct and I can start it up in the browser.
But I am still having problems to start a task:
[url]http://www.noordlaarderbos.nl/linux/fog_task_management4.png[/url]
The password for mysql and TFTP seems to be correct.
In the logviewer of Fog, I see this:
[02-10-14 1:54:27 pm] * [02-10-14 1:54:27 pm] Checking if I am the group manager.
[02-10-14 1:54:27 pm] * [02-10-14 1:54:27 pm] I am the group manager.
[02-10-14 1:54:37 pm] * [02-10-14 1:54:37 pm] Checking if I am the group manager.
So can you help me further? -
The log viewer messages are correct. That means the FOG Services are actually working now.
The upload issue worries me. You’re certain you can ftp to your fog server using the fog user and fog password?
-
When you set up Ubuntu did you create a user named FOG?
Are you able to Register the machine as a Host in the Web GUI? (sorry silly question just want to verify)
-
[quote=“Tom Elliott, post: 22717, member: 7271”]The log viewer messages are correct. That means the FOG Services are actually working now.
The upload issue worries me. You’re certain you can ftp to your fog server using the fog user and fog password?[/quote]
On the Windows 7 machine I tried to make an connection with FileZilla with <ip address> port: 22 and then the fogusername + password. That was okay, I could make a connect to the Ubuntu machine.
In an earlier stage I changed:
Something like this password to my fogusername + password. I hope that was correct?
define( “STORAGE_FTP_PASSWORD”, “98244f89651eaa2d2c84bd794ab9f60a” );This evening Fog crashed and I had to install it again. Now it up and running again. With the same results, when I set the upload-task:
Unable to start task
Unable to upload file -
[quote=“Jaymes Driver, post: 22724, member: 3582”]When you set up Ubuntu did you create a user named FOG?[/quote]
I can’t remeber when I created a user named FOG.
[quote="JAre you able to Register the machine as a Host in the Web GUI? (sorry silly question just want to verify)[/quote]
What do you exactly?
