Upload Image FOG - UBUNTU
-
the first is a mistake yes, because if I leave the machine turned on it does not upload the image. therefore believe it is a mistake!
-
Well a search and a quick look reveals the solution to the problem in the first picture.
I would try the kitchen sink kernel and see if that helps, it may be a driver issue, you should consider writing your own custom kernel with your specific drivers included.
As per the posting [url]http://fogproject.org/forum/threads/pxe-boot-error-no-chip.4466/#post-13138[/url]
Jason recommends a Kitchen Sink kernel to solve the problem.
I would still recommend taking a look at your permission settings, without the correct settings it won’t matter if you can load the pxe boot screen or not. Without the proper permissions on the folders and files you WILL NOT be able to save them.
[SIZE=4]You also never answered my questions.[/SIZE]
[SIZE=4][B]Is this a new fog server? [/B][/SIZE]
[SIZE=4][B]Have you tried other hardware? [/B][/SIZE]
[SIZE=4][B]Does the other hardware work with fog? [/B][/SIZE]
[SIZE=4][B]Can you try another machine and see if it is driver specific? again if it is you will need a custom kernel.[/B][/SIZE][SIZE=4][B]Are you saving to the /images folder or are you saving your images on another server or NAS?[/B][/SIZE]
[SIZE=4][B]If this is NOT a new server are any other hardware affected? [/B][/SIZE]
[SIZE=4][B]When did the problem first arise?[/B][/SIZE][SIZE=3]I’d love to help you but I’m not going to try to exhume information from you or try to hold your hand, if you want help you need to pay attention and cooperate.[/SIZE]
-
yes
only one hardware server, and am testing on 2 machines with different hardware … (1 error in each)
I’m saving for the default folder
I installed this server last week, these are my first tests …how do I create a kernel? my version is the most current … can it be so?
-
The Kitchen Sink kernel includes extra drivers that may be necessary for your machine hardware, the stock kernel doesn’t include all of the extra drivers as it adds to the load time of the pxe boot menu and such. But when you are stuck it’s a great starting point.
It’s good that you are using the default folder, and that you are on a fresh server, if these applications do not work it would be a good idea to re-configure your fog server, there may be a setting somewhere that got nerfed.
Are the ONLY pieces of hardware you are working with the HP100b and the Optiplex? Do you have other hardware you can try?
The HP problem is a driver problem,
The Optiplex problem is a permissions problem.There is an AMAZING guide written by Ozzy and posted in tutorials, it explains the process of creating a custom kernel. ->[url]http://fogproject.org/forum/threads/request-for-kernel-compiling-info-please-read.4045/[/url]
[B]How to Build a Custom Kernel for FOG Server using Ubuntu 12.04[/B]
First, make sure you have [B]G++ (GNU C++ compiler) and QT4 (Qt 4 Designer) [/B]installed through the Ubuntu software center.
Next, pick a Linux kernel you want to use to compile the kernel at [URL=‘http://www.kernel.org/’]www.kernel.org[/URL]. (Used linux-3.10-rc2.tar.xz for this document;[url]https://www.kernel.org/pub/linux/kernel/v3.x/testing/linux-3.10-rc2.tar.xz[/url]) Download the file to the ‘home/user/Downloads/’ directory. (default)
Then, download the Fog installation package installer. (Current version 0.32;[url]http://sourceforge.net/projects/freeghost/files/FOG/fog_0.32/fog_0.32.tar.gz/download[/url]) Make sure to download to the ‘home/user/Downloads/’ directory. (default)
Now we will extract the files to their proper locations.
First, extract the FOG installer to the download folder. (see below for command)
[B]sudo [/B][B][FONT=Tahoma]tar -xvf /home/user/Downloads/fog_0.32.tar.gz[/FONT][/B]Then, we will want to extract the kernel to the ‘/usr/src/kernels/’ directory. If the directory does not exist create it. You will also need to copy the tar.gz file to the kernels directory in order to extract properly. (see below for commands)
[B]sudo mkdir /usr/src/kernels/[/B]
[B]sudo cp /home/user/Downloads/linux-3.10-rc2.tar.xz /usr/src/kernels/[/B]
[B]cd /usr/src/kernels/[/B]
[B]sudo tar –xvf linux-3.10-rc2.tar.xz[/B]Now we can either use CORE or Kitchen Sink to create the kernel.
To use [B]Core[/B] use the following command:
[B]sudo cp [/B][B][FONT=Tahoma]/home/username/Downloads/fog_0.32/kernel/core.config /usr/src/kernels/linux-3.10-rc2/.config[/FONT][/B]To use [B]Kitchen Sink[/B] use the following command:
[B]sudo cp [/B][B][FONT=Tahoma]/home/username/Downloads/fog_0.32/kernel/kitchensink.config /usr/src/kernels/linux-3.10-rc2/.config[/FONT][/B]Once the .config file is copied to /usr/src/kernels/ you can now run the make xconfig command.
[B]cd /usr/src/kernels/linux-3.10-rc2[/B]
[B]sudo make xconfig[/B]Now the kernel editor should pop-up after a few seconds. Here is where you will locate and select/deselect drivers you want to load to your custom kernel. (see screenshot for example)
[IMG]http://i.imgur.com/a49MUxh.jpg?1[/IMG]
Once you are done with your selections just [B]save and quit[/B].
Now you have to run one final command to write the kernel file.
For 64-bit systems:
[B][FONT=Tahoma]sudo make ARCH=i386 bzImage[/FONT][/B][FONT=Tahoma]For 32-bit systems:[/FONT]
[B][FONT=Tahoma]sudo make bzImage[/FONT][/B][FONT=Tahoma]You may get a few prompts during the compile, I just used default options (enter). It will take a while (10-30 minutes) to compile the kernel so be patient.[/FONT]
[FONT=Tahoma]Now that you have created a custom kernel you will need to copy/cut the file to your FOG server.[/FONT]
[FONT=Tahoma]Go to the [B]/usr/src/kernels/linux-3.10-rc2/arch/x86/boot/[/B] directory to find the new [B]bzImage[/B] file you created. That is the file you need to import to your FOG server kernels directory in order to use it. (You can rename it or use the new kernel as the default kernel for FOG to use if you leave the name bzImage)[/FONT][FONT=Tahoma]The directory where you should paste the new kernel is /tftpboot/fog/kernel/ on the FOG server.[/FONT]
[FONT=Tahoma]Make sure you assign the custom kernel to the proper host in the FOG management GUI and then you should be able to Upload/Deploy. You might need to add the host manually; you’ll just need the MAC address of the NIC for the host.[/FONT]
[B][I][FONT=Tahoma]Written by Ozzy[/FONT][/I][/B]
-
Again, I would still be checking the permissions of the folder, because once we get the kernel working you’re going to need the permissions set properly to upload your image.
Also I forgot to ask, what Operating System are you imaging with?
-
the fog server must be in the field? because it is not the fault of uploading permission. Anyone know help me?
-
the fog server must be in the DOMINIO? because it is not the fault of uploading permission. Anyone know help me?
-
I have had the same problem with our 990:s, check so your kernel has NFS support. Otherwize the problem lies in the init.gz, we have managed to recompile it after a lot of trouble but since we are struggling with RAID support our bzImage and init.gz are unstable otherwize I would upload them.
Try recompiling the kernel with NFS support and get back if it ain’t working.
-
[quote=“Jaymes Driver, post: 13144, member: 3582”]Again, I would still be checking the permissions of the folder, because once we get the kernel working you’re going to need the permissions set properly to upload your image.
Also I forgot to ask, what Operating System are you imaging with?[/quote]
windows 7
-
did you run sysprep as administrator before you tried to pull the image? (first pic)
