Joining hosts to domain?
-
@sebastian-roth I believe I have the imaging issue resolved it was unrelated. However, good news! It did work one time. I reimaged the PC after adding the MAC address to the list of additional MACs and then post image after logging into the machine with the local account I got a message at the bottom right of the screen saying FOG had to perform actions and then the device shut down and joined the domain.
After getting excited that we finally had it working I tried on another device with no success. I added the additional MAC and reimaged but after sitting for 15 minutes or so I have had no message appear.
Thank you!
-
@Kureebow Great you got the first one working. I am sure the next one will be easier to solve. Take a look at the fog.log file on that new machine again and post it here.
-
@sebastian-roth Here you go sir
-
@Kureebow In the logs we see “Invalid host” again. So boot up that machine to the Windows OS and run
getmac /vin a CMD window. Note down the MAC address it shows for the Ethernet and add this MAC to this host as a secondary MAC via the FOG web UI.Basically you need to find out why your systems register with those MACs from the USB NIC adapters.
-
@kureebow in windows, once the fog client is installed AND you have the correct AD settings in fog:
it should work without issues. Correct settings are make sure “join domain after deploy” as well as "name change(ad join forced reboot) are selected,as well as a domain username credentials with privilege to join the domain. You may have to “reset encryption data” for fog to get the correct token, that is if you keep getting the below errors over and over:
9/27/2022 10:48:41 AM Middleware::Authentication ERROR: Could not get security token
9/27/2022 10:48:41 AM Middleware::Authentication ERROR: Could not find file ‘C:\Program Files (x86)\FOG\token.dat’.
