Unifi USG settings to netboot (pxe)

[brechtvervaeke]

Hi,

What pxe settings do I have to do in a unifi controller to make fogserver working.

Netbootserver: ???
Filename: ???
TFTP server: ???

Is there anything else?

Thx
Brecht

[george1421]

@brechtvervaeke That should be it.

Netboot server is IP address of FOG server
File name will be" undionly.kpxe for bios computers and ipxe.efi for uefi computers. For the tftp server you can add the IP address of FOG server there too.

-OR-
You can install dnsmasq on FOG server to just supply the pxe boot information and leave the rest of dhcp to unfi controller. It takes about 10 minutes to install dnsmaq on the fog server, then you won’t need to mess with the unifi controller.

[brechtvervaeke]

@george1421

Thx

I tried installing dnsmasq but I still get de message.

TFTP.
PXE-T01: File not found
PXE-E3B: TFTP Error - File Not found
PXE-MOF: Exiting PXE ROM

Where is my mistake?

[george1421]

@brechtvervaeke For DNSMASQ install I would follow this guide exactly: https://forums.fogproject.org/topic/12796/installing-dnsmasq-on-your-fog-server

To the error, is the fog server on the same IP subnet as the target computer?