Fog quick image password not working

george1421

@strahd said in Fog quick image password not working:

param username ${username}
param password ${password}

I’m not suggesting you do this, but if you tweaked the iPXE menu this way you can do a deploy image without a password prompt. Understand there is a security risk here because the uid and password will be in clear text in the ipxe command file.

params
param mac0 ${net0/mac}
param arch ${arch}
param username <fog_ui_user_id>
param password <fog_ui_user_password>
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

Where <fog_ui_user_id> and <fog_ui_user_password> are the actual fog web ui credentials

Strahd

@george1421 I’ll try your menu option for testing purposes - I do work in a public school though and I’m not sure if I want to leave it like that.

Also to answer your other message: Our user name and password are us-english characters and are very simple and short.

Strahd

@george1421 I tried your script. Does it need the word “login” at the top like the old one had? Regardless, I tried it both ways. When I choose deploy from the menu I still get a login prompt, and am still unable to authenticate. (FYI We do not use LDAP, my goal is to keep this system as simple as possible.)

george1421

@strahd It does not need the login command. That forces the ipxe menu to ask the user for a user ID and password. It doesn’t authenticate the user but only places what the user entered in $username and $password variables.

entering them in directly for the parameter username should be good enough. Understand you need to remove the greater than and less than characters.

Strahd

@george1421 OK, tried all that and it still does not work. I’m sure the problem lies at a deeper level somewhere. I made a video of the entire boot process, maybe you will see something out of the ordinary?:

https://drive.google.com/file/d/1a_FtsLZOHJ0EzV3UakXAaSmS_RMD7b5C/view?usp=sharing

george1421

@strahd So what I gathered from the video is that you had to try twice to enter the password. Then it started imaging, but what it actually did was go into hardware compatibility mode.

What is unique about this is someone else had this issue with FOS not going to imaging but jumping into hardware compatibility mode.

Lets have you switch your FOG install over to the dev branch. This will take your fog version to 1.5.9.115 or later. It has the latest fixes. I don’t think any of the fixes solve this issue, but it will fix a few other annoying issues. Plus it will give the developers a point in time to look.

Upgrading to the dev version is pretty easy. Just change into the local git repository you cloned when you install fog, typically /root/fogproject then run these commands.

cd /root/fogproject
git pull
git checkout dev-branch
git pull
cd bin
./installfog.sh

This will upgrade FOG with all of the settings you previously selected.

Now the only caveat here is that when FOG 1.5.10 is released, you will need to switch back to the master branch to install FOG 1.5.10.

cd /root/fogproject
git pull
git checkout master
git pull
cd bin
./installfog.sh

Now beyond the update to fog 1.5.9.115 or later, the things I see is that FOG iPXE is asking you twice for the password. FOG iPXE doesn’t know anything about passwords or user names, it just collects them and passes them off to boot.php that runs on the FOG server. When you enter the password it appears that it came right back and asked for the password again without posting the values to the FOG server. That is strange.

Now what I want you to do is first make sure you are not passing the user ID and password as I mentioned before. I want you to open the following url with a web browser http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00 That will print out a screen of text. Copy and paste that into this tread. I want to see if something jumps out to why the login prompt isn’t working.

Sebastian Roth

@Strahd Does this happen for every machine or is it an issue with a particular model?

Strahd

@sebastian-roth OK, now we are getting somewhere… With some testing, this seems to be a model specific issue.

HP 450 G2 Legacy mode - works
HP 450 G5 UEFI - works
HP 450 G7 UEFI - works
HP 450 G8 UEFI - not working - it boots normally but the username/password for quick deploy doesn’t work for some reason
The G8 bios does not support legacy mode so I can’t test that.

Sebastian Roth

@Strahd Have you checked to see if there is a firmware update available for the G8?

I am pretty sure the other time we had this issue discussed in the forums it was specific to one model as well. It’s really strange this doesn’t work on particular models.

When you type in the username and password field do you see the characters printed in screen?

Strahd

@sebastian-roth There’s a video link in this thread that shows the entire process.
https://drive.google.com/file/d/1a_FtsLZOHJ0EzV3UakXAaSmS_RMD7b5C/view?usp=sharing

Yes, it show characters being typed, and I get denied three times before it gives up and drops out. I have verified that I am typing the credentials correctly, and went as far as creating another admin account and it fails as well.

I will investigate a bios update. I know for a fact that there is a firmware update for this laptop - Microsoft Update is a delivery mechanism for this HP bios update, which is (in my opinon) pretty unusual.

Strahd

@sebastian-roth OK, did a bios update - that part was actually nice since the bios supports updating over ethernet without the need for an operating system or flash drive. Fog still fails, though, so that didn’t fix it. I can still deploy an image via scheduled task in the web UI, just not from the fog boot menu. It’s not a deal breaker but it would be nice to know what isn’t working.

Sebastian Roth

@Strahd Too bad the firmware update didn’t fix it. Well than you can dig into it by adding debug output to the iPXE menu code. Go to the FOG web UI -> FOG Configuration -> iPXE Menu Item Settings -> fog.deployimage -> Parameters:

login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
### add this START ####
echo Username: ${username}
echo Password: ${password}
echo Please press ENTER to go ahead...
read prompt
### add this END ####
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme

I think it should be pretty clear which part I added in between to print out the variables. I just tested this on my dev environment and it works just great no matter if I type in the correct or wrong credentials it prints it out before going ahead.

Update: Now when I look at the video again I guess you might not even get as far as this. So if it does not do the print out you can start adding simple lines of deugging between each of the existing lines to see when things start to fail.

login
echo Test1 && read test1
params
echo Test2 && read test2
...

Strahd

@sebastian-roth Ok, I took it a step further and added 2 more lines to your script, mostly to see if it wasn’t all zeroes or something:
echo mac0: ${net0/mac}
echo arch: ${arch}

Output data is as follows:
Username: fog
Password: xxxxxx
mac0: e0:70:ea:aa:95:dc
arch: x86_64
Please press ENTER to go ahead…

The output username and password are correct.
Additionally, after pressing enter on a WORKING computer (only), I very briefly see the following line:
http://10.46.10.40/fog/service/ipxe/boot.php… ok
The non-working computer does not show that line, but rather jumps back to the login prompt.

Sebastian Roth

@strahd said in Fog quick image password not working:

The non-working computer does not show that line, but rather jumps back to the login prompt.

Do I get this right? You see the debug output but not the “http://10.46.10.40/fog/service/ipxe/boot.php… ok” line?

Can you please add the following line to the very end:

goto bootme

That might really be a bug in our iPXE boot script generation!! I guess the G8 model has at least three network devices and that makes it skip the jump to the correct label after entering the password.

Great you did some further testing and we finally figured this one out. Can you imagine we did not run into this very simple issue for years and years?!?!?

Strahd

@sebastian-roth Awesome, this ALMOST fixed it. Good job!
I am now properly prompted to select the proper boot image, however when I press enter on that menu it just jumps back to the original pxe boot menu.

As for having more than three network devices… I did notice that HP added an option to pxe boot over wifi, which seemed like pretty new tech, though I’m not sure how that would work without adding lots of custom drivers, or something.
IMG_1006 (1).JPG

Sebastian Roth

@Strahd Ok, this one is pretty similar but it can only be fixed in the code. But before I ask you to update to the latest dev-branch version we should better try a manual fix for you. Can you please edit /var/www/fog/lib/fog/bootmenu.class.php and jump to line 1056 or search for “param imageID”.

Here is how the code should look like originally: https://github.com/FOGProject/fogproject/blob/master/packages/web/lib/fog/bootmenu.class.php#L1062

Please add that single one line (or all three if you add the comments as well) after line 1062 like this:

...
                        'param imageID ${imageID}',
                        'param qihost 1',
                        'param username ${username}',
                        'param password ${password}',
                        'param sysuuid ${uuid}',
                        'isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme',
                        'isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme',
// add line START
                        'goto bootme',
// add line END
                    );
                    unset($Image);

...

Just save the changes, no need to reboot the server or anything. Changes are life right away. If you mess with the code it will break PXE booting for any client.

george1421

@sebastian-roth said in Fog quick image password not working:

If you mess with the code it will break PXE booting for any client.

@Strahd if you get into a situation where the file doesn’t get updated correctly and its messed up, simply rerun the FOG installer script and it will fix (return it back to the standard programming code) things for you.

Fog quick image password not working

200

11.7k

17.1k

154.6k