FOG isnt deploying on new laptops.

[bofh]

Interesting, I’ve been able to deploy to E14 Gen 3’s without that issue.
I’m running FOG version 1.5.9
Kernel versions:
bzImage Version: 4.19.145
bzImage32 Version: 4.19.145

[Larmurier1383]

HI @george1421 i have uptdate my bzImage and bzimage32 on 5.15.19 version but i still have te same error “no configuration method succeded” but not having the DHCP failed

Its a LENOVO E15 this time

[Larmurier1383]

@bofh Hi, i try on Thinkpad E15 Gen 2 and still can’t boot with 4.19.x or 5.15.x version… I dont understand why

[Larmurier1383]

@maxcarpone Hi, i try on Thinkpad E15 Gen 2 and still can’t boot with 4.19.x or 5.15.x version !

[george1421]

@larmurier1383 Well first thing I noticed is that you need to make sure that you updated the 64 bit version of FOS Linux kernel. You only mentioned the 32 bit version.

Next thing I want you to do is schedule another capture/deploy it doesn’t matter. But before you hit the schedule task button enable the debug check box.

Now pxe boot the target computer into imaging.

After several pages of text that you need to clear with the enter key you will be dropped at the fos linux command prompt (note that you still should see the error about no configuration methods, that is OK because we need debug mode to see what is going on).

Now at the FOS Linux command prompt I want you to key in the following and post the results here. (you might want to take clear picture shot with a mobile phone and post it)

uname -a

lspci -nn | grep -i net

ip a s

Lets see what these commands can find.

[Larmurier1383]

@azer I have updated the 2 version (i guess?..)

for the uname -a :

Hope we can find a solution !

[george1421]

@larmurier1383 OK We find out a bit more what is happening here.

1. The uname -a command tells us that you are still running 4.19.x kernel and not 5.15.x. We need to fix that because 4.19 doesn’t have drivers for new hardware.

2. Not sure why grep is not found, it should be on all computers. Try sudo apt-get install get This might not be important because we can see in the next command

3. For ip a s it shows your network interface has an IP address. This should not be if we get the “No configuration methods succeeded”

It may be a translation issue but this statement give me a problem. " i have uptdate my bzImage and bzimage32 on 5.15.19 version but i still have te same error “no configuration method succeded” but not having the DHCP failed"

Does this mean the pxe boot computer gets IP address, but still give message about no configuration methods? If yes, can you ping the fog server from the computer in debug mode?

EDIT: STOP! I see the problem

You entered those commands I give you on the FOG server. That is not what I wanted. I wanted you to enter those commands on the pxe boot computer you started in debug mode. That is why the information you give did not do what I expected.

[Larmurier1383]

@george1421 Sorry im on work ill text you later when i can thank’s for the help !

[Larmurier1383]

@george1421 So here is my main problem :

[george1421]

@larmurier1383 OK I see. You do not get to FOG iPXE menu. That has a different fix to try. There are 2 spots where that same message appears. I was thinking the error was on the second location. But you are stuck on the first location (no iPXE menu)

I give you instructions to update the version of iPXE to the newest release. This might fix the problem because the updated version of iPXE will have the newest hardware drivers.

https://forums.fogproject.org/topic/15826/updating-compiling-the-latest-version-of-ipxe

[Larmurier1383]

That work now, thank you !