Slow server fog
-
Good evening,
I have an r710 server with exsi 6.5
I have 3 tp link 10/100/1000 switches
Each switch is connected to a WM called (FOG1-FOG2-FOG3)When I deploy on clients at first it goes to 16 all of a sudden it drops to 7 then to 8 sometimes even 5.
The cables have been certified UTP cat6
How can I solve?
Thank you -
@alexamore90 I am not sure we can help you with this. Have you done speed tests using other tools to make sure it’s not just a hardware bottle neck?
Which version of FOG do you use?
PS: ESXi 6.5 is end of life.
-
@alexamore90 We will need to know a lot more about your environment to be able to help you.
- How is your ESXi box connected to your tp switches. Do you have just one cable between your esxi box and the network switches or do you have a LAG group setup?
- Are your network switches connected in a star or daisy chained configuration.?
- How many physical computers do you have?
- How many over VMs are running on this ESXi box?
- How many unicast deployments are you doing at the same time?
-
@george1421
Hi george it s possible can i have your number wathsapp .
Do you speak italian? Or english ?
Thanks -
@alexamore90 Sorry I don’t use that application. If you are more comfortable to post in your native language you may do that. We try to keep the posts in english, but find sometimes we get better detail when the poster uses their native language and we translate. I will only post in english through.
If you have a basic drawing of your setup that might help too, Remember we have to imagine your configuration based on the words you use.
One additional question I should have asked, is your current configuration for a home lab or a business?
