problème d'enregistrement d'un pc latitude sur fog
-
@abde I know its confusing but you will need to follow the manual update process as I mentioned before. This is due to a change on where the files were stored after FOG 1.5.9 was released. They were moved from being hosted on the fogproject web site to github. FOG 1.5.9 doesn’t know how to find them yet on Github. FOG 1.5.10 (that will be released in a few weeks) will know how to get the most recent kernels.
Let me ping one of the developers to see if there is an option here without going down the manual path. I’ll let you know when I get a response.
-
This post is deleted! -
@george1421 We have managed to update the kernel. We tried to save it, no error. It goes up on fog. However, after the registration, on the pc it always puts “Host is Not Registered”.
Is there any other update to do?
Thank you for your help
-
@abde said in problème d'enregistrement d'un pc latitude sur fog:
it always puts “Host is Not Registered”
This is a different issue and is typically seen on HP computers, not dell. I don’t know the 5320s, we have 5420s on my campus that work well with FOG.
In your case what we’ve seen is (at least with the HPs) they use a usb attached ethernet adapter, where iPXE is seeing the pass through mac address from the computer and FOS Linux is seeing the mac address of the usb adapter only and not the pass through mac address.
If you are using an external network adapter either in dock or usb attached. Collect the mac address of that adapter. Look in the uefi firmware and get the mac address of the LOM on the computer. Now finally look in the FOG Web UI and in the host definitions for this computer. Look at the mac address there.
What device does the mac address that is defined in fog host definition match?
Also tell me about how your computer connects to the network and if your computer has a built in ethernet adapter, the 5420s do have a built in network adapter.
-
@george1421 Now that you mention it, we tried with two pc’s and the mac address on fog was the same. It probably gets the mac address from the usb adapter. Do you have a solution for this?
We use dell latitude 5320.
Thanks
-
@abde See if the dells have an option for Network adapter mac address pass through. For the 5420s we always image them using a WD15 or WD19 dock, but the mac addresses are always unique to the computer not the dock. I don’t know what magic Dell done, but that process has always worked so I never had to deal with this problem.
-
@george1421 I changed the mac address of the registration to that of the PC. For the moment the capture is done. But we do all the tests and we come back to you
Thanks a lot
-
@george1421
hello,I have a problem when i boot with my laptop in pxe.
I send you a picture with the error message
Do you have an idea of the problem
-
@abde Yes I do know this problem.
-
@abde Search the web or the forums for “unclean filesystem” or “dirty bit” and I am sure you will figure things out.
-
@george1421 Hello George.
Hello George,we had different problem (see attachment)
the first image was fixed by putting the fastboot (2nd image) in minimal for the capture and for the deployment.
3rd image during the deployment we have an error message but the deployment still works.
4th image at the time of starting the pc after deployment, one has systematically this error message.
Can you help us.
thank you
1er https://ibb.co/64HzCjs
2e https://ibb.co/5cwDhnW
3e https://ibb.co/sHvxt0z
4e https://ibb.co/rQPSQDp -
@george1421 In addition, the C-type adapter is not recognized for the pxe. Only in usb.
-
@abde said in problème d'enregistrement d'un pc latitude sur fog:
In addition, the C-type adapter is not recognized for the pxe. Only in usb.
We are starting to switch into areas that are not within scope of your subject line. The moderators like to keep it to one problem per thread so when/if someone is looking for the exact problem you have in the future they don’t get confused because there are 5 different and unrelated issues in the same thread. “New problem == new thread”
UEFI firmware is much like an OS in that it will only support known hardware. To support usb-c pxe booting you need to use a network adapter that is supported by the hardware manufacturer. This is a function of uefi and the hardware. You could boot from a usb flash drive into iPXE, if iPXE and FOS Linux supports that usb-c network adapter then you can image with FOG.
The unclean disk image is because you did not power off windows correctly for imaging. This is a “feature” of windows and not a bug in FOG. If you want to know more about this issue then google “Windows dirty bit”
You have 3 options here.
- Use sysprep to power off the computer.
- use the following command to power off the computer.
shutdown -s -t 0 - Turn off windows fast boot.
The windows restarted expectidly is one of a number of things.
- The most common is that you have the FOG Client installed and you did not disable the service before image capture. You would then turn the fog client back on in the setupcomplete.cmd batch file or via the unattend.xml file. ref:
https://wiki.fogproject.org/wiki/index.php/FOG_Client#FOG_Client_with_Sysprep - You have a windows driver that expectantly rebooted during WinSetup/OOBE
-
@george1421 je comprend , je ferai un autre post pour les prochaines question.
Nous avons réussi a faire l’image et retirer les message d’erreur (c’était un problème de sysprep) et la non présence de l’agent fog sur le poste.Merci beaucoup de votre aide et je penserai à crée des topic pour les différents problème rencontrer afin d’aider la communauté.
-
@abde No problem. I am happy to answer your questions, we just need to follow the guidance of the developers to keep one problem one thread policy.
