Version 1.5.9 default directory for iso

petec

Hello World
New with FOG here and im trying to use it for pxe boot. I do find tutorials online for older versions mentioning that the images should go under root-tftpboot but on the new version the directories are different. so where do i upload iso’s for pxe in this version.

thank you for your help in advance

george1421

@petec It depends on the FOG server’s linux os, but most are now in /tftpboot directory.

Sebastian Roth

@petec I think the answer depends on how you want to PXE boot the stuff. If you want to use slow TFTP, then they go in /tftpboot but there are other options, like HTTP and if you are pretty keen you can even extract the ISO and make it PXE boot over NFS. So it all depends.

petec

@george1421 I’m on centos 7

george1421

@petec /tftpboot is the right directory then. But as Sebastian said, there are many methods of pxe booting once you get iPXE loaded into memory. The PXE Rom only supports tftp protocol, so iPXE will need to be transferred via tftp. Once iPXE is running then you can use other protocols like NFS and HTTP(S), which are much faster protocols than tftp.

petec

@sebastian-roth said in Version 1.5.9 default directory for iso:

depends on how you wa

I think i figured out how the directories work. Now i upload and extract Gparted inside /tftpboot/gparted and i set these parameters according to a tutorial i found online:

kernel fog/gparted/live/vmlinuz
append initrd=fog/gparted/live/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs

The client gives me the following error:

fog/gparted/live/vmlinuz…ok
append command not found

Any tutorials or examples for 1.5.9 that work?

george1421

@petec said in Version 1.5.9 default directory for iso:

append initrd=fo

This is a syslinux command not iPXE. You want imgargs keyword for kernel parameters. https://ipxe.org/cmd/imgargs

george1421

@petec said in Version 1.5.9 default directory for iso:

kernel fog/gparted/live/vmlinuz
append initrd=fog/gparted/live/initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs

But I can also tell you this is wrong too. I would rewrite it as

kernel /fog/gparted/live/vmlinuz
initrd fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2

This command might still give you some problems if you don’t have what its wanting to fetch in the right location.

You might want to review this post: https://forums.fogproject.org/post/140524 since it appears similar to your imgargs

petec

@george1421 said in Version 1.5.9 default directory for iso:

/fog/filesystem.squashfs

so here is the current config, with all the paths checked.

kernel /fog/gparted/live/vmlinuz
initrd /fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs

Error

Could not select: Exec format error

im kinda lost. Most of the info online are for the older versions.

george1421

@petec That message “Exec format error” is because something is wrong with vmlinuz. Either its not in the right path, the file is corrupt, or something else was keeping it from starting up.

Confirm that your kernel is in
/tftpbboot/fog/gparted/live on the fog server

you can also use the linux command file /tftpbboot/fog/gparted/live/vmlinuz to read the kernel header.

Remember for the different protocols, they have different doc roots on the FOG server.

tftp: /tftoboot
nfs: /images
http: /var/www (for debian variants) /var/www/html (for rhel variants)

petec

@george1421 said in Version 1.5.9 default directory for iso:

file /tftpbboot/fog/gparted/live/vmlinuz

Its the right path,

[root@bootserver html]# file /tftpboot/fog/gparted/live/vmlinuz

/tftpboot/fog/gparted/live/vmlinuz: Linux kernel x86 boot executable bzImage, version 5.10.0-8-amd64 (debian-kernel@lists.debian.org) #1 SMP Debian 5, RO-rootFS, swap_dev 0x6, Normal VGA

george1421

@petec You are seeing it transfer the kernel and the init? Do you have a screenshot of the error (clear picture taken with mobile phone)? If the path is right and the kernel is right, ipxe should at least try to boot it.

petec

@george1421 ![alt text]

Im confused too. i attach an image!

george1421

@petec Your screen shot doesn’t show its downloading the initrd image before it tries to boot the kernel. That is strange. The kernel should boot without the initrd only so far, but it should boot.

So the next bit is to help a bit more with debugging. In the web ui ->FOG Configuraiton -> FOG Settings menu. There should be a value for logging level. It may be 1 or 4, turn it up to 7. This will inform the linux kernel booting to send all log messages to the console. This should give us a bit more detail.

The next bit is to use a windows web browser and browse to http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=00:00:00:00:00 This will print out a bunch of text, copy and paste that text into a new post. That is the iPXE menu commands that builds the FOG iPXE menu. I want to look at the configuration for your menu. There has to be something off here.

petec

@george1421 Thanks for helping man

Here is the file output:

#!ipxe
set fog-ip 10.0.0.2
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://10.0.0.2/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item g.parted Gparted
item os.hiren Hiren
item os.hiren2 Hiren2
item bd.hiren Hiren
item os.laze Lazesoft
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=7 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://10.0.0.2/fog/ consoleblank=0 rootfstype=ext4 storage=10.0.0.2:/images/ storageip=10.0.0.2 nvme_core.default_ps_max_latency_us=0 loglevel=7 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:g.parted
kernel /fog/gparted/live/vmlinuz
initrd /fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
param sysuuid ${uuid}
:os.hiren
initrd http://${fog-ip}/fog/iso/hbcd/hbcd.iso
kernel http://${fog-ip}${path}/casper/vmlinuz.efi || read void
initrd http://${fog-ip}${path}/casper/initrd.lz || read void
imgargs vmlinuz.efi root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:${nfs_path} ip=dhcp splash quiet – || read void
boot || goto MENU
param sysuuid ${uuid}
:os.hiren2
kernel /fog/hbcd/live/vmlinuz
initrd /fog/hbcd/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
param sysuuid ${uuid}
:bd.hiren
initrd http://${fog-ip}/images/tools/hbcd/HBCD_PE_x64.iso
chain memdisk iso raw ||
boot || goto start
param sysuuid ${uuid}
:os.laze
initrd http://${fog-ip}/fog/iso/laze/lsboot.iso
chain memdisk iso raw
param sysuuid ${uuid}
:bootme
chain -ar http://10.0.0.2/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

petec

@george1421

Keep in mind that the photo is EFI, if i do Legacy is downloads it and then comes to the same error

george1421

@petec OK here is the part of the menu that seems to be causing the problem.

kernel /fog/gparted/live/vmlinuz
initrd /fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs

Lets change the parameter block to look like this

kernel tftp://${fog-ip}/fog/gparted/live/vmlinuz
initrd tftp://${fog-ip}/fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live union=aufs noswap noprompt vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
boot || goto MENU

petec

@george1421 You helped a bunch my friend

i did some tweaking and now is works, here is the menu parameters for latest gparted:

kernel tftp://${fog-ip}/fog/gparted/live/vmlinuz
initrd tftp://${fog-ip}/fog/gparted/live/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live config components union=overlay username=user noswap noeject vga=788 fetch=http://10.0.0.2/fog/filesystem.squashfs
boot || goto MENU

Version 1.5.9 default directory for iso

143

12.0k

17.3k

155.2k