FOG deploy: partitions 4 and 5 too big for disk
-
@sebastian-roth said in FOG deploy: partitions 4 and 5 too big for disk:
@madeyem Ok, I had another look at this and I have to say that my initial thought was right. Your issue is caused by the same problem discussed in the other forum topic mentioned before.
I can say that FOG 1.5.7 would not have been able to shrink this layout either I am pretty sure!
Proofed myself wrong!
I will look into fixing what is causing this in the inits. Will let you know as soon as I have it ready for testing.
Ok, thank you!
-
-
@sebastian-roth said in FOG deploy: partitions 4 and 5 too big for disk:
@madeyem Please download this FOS init and try capture or deploy again. The issue should be fixed.
I’m currently on vacation for two weeks. I will report back, as soon as I’m back in the office and have tested it. Thanks!
-
@sebastian-roth said in FOG deploy: partitions 4 and 5 too big for disk:
@madeyem Please download this FOS init and try capture or deploy again. The issue should be fixed.
I replaced the default init.xz with the one you linked and tried to deploy, but unfortunately I still get the same error message. The correct init version is shown (20211009).
I can try to re-capture an image as soon as I have one of the SSD machines at my disposal (or when the new PCs I ordered finally arrive).
-
FYI:
Just for the fun of it, I tried to deploy an Windows 7 image from 2018, which worked perfectly fine, but all my Windows 10 images fail. -
@madeyem said in FOG deploy: partitions 4 and 5 too big for disk:
I replaced the default init.xz with the one you linked and tried to deploy, but unfortunately I still get the same error message.
Sure thing. As I said in my last post you should capture and deploy. In your case the already captured image doesn’t have the proper shrunken partition layout and therefore can’t be deployed to a smaller size disk I suppose. If you try deploy those Win 10 images to a large disk, do they fail just the same way? If so I ask you to take a picture of the error on screen and post that here.
-
@sebastian-roth said in FOG deploy: partitions 4 and 5 too big for disk:
Sure thing. As I said in my last post you should capture and deploy. In your case the already captured image doesn’t have the proper shrunken partition layout and therefore can’t be deployed to a smaller size disk I suppose. If you try deploy those Win 10 images to a large disk, do they fail just the same way? If so I ask you to take a picture of the error on screen and post that here.
Ok, I think I might get my hands on one of the SSD machines later this (or next) week. I will then re-capture, deploy and report back.
-
I re-captured an image on a SSD machine (with the new init) and deployed to the HDD machine, but got the same error message as before.
From the re-captured image:
d1.minimum.partitions:
label: gpt label-id: 8C0CB60E-93F5-4C14-B633-3852928F826C device: /dev/nvme0n1 unit: sectors first-lba: 34 last-lba: 1000215182 sector-size: 512 /dev/nvme0n1p1 : start= 2048, size= 1433600, type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B, uuid=2AFFEC30-5F77-4C6B-BA7C-902A01A971E1, name="EFI system partition", attrs="GUID:63" /dev/nvme0n1p2 : start= 1435648, size= 262144, type=E3C9E316-0B5C-4DB8-817D-F92DF00215AE, uuid=E8336B4A-8C8F-48F5-85DE-E6237B7A372F, name="Microsoft reserved partition", attrs="GUID:63" /dev/nvme0n1p3 : start= 1697792, size= 995426761, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, uuid=38131294-BD57-43F5-ACE4-2E1413614C9A, name="Basic data partition" /dev/nvme0n1p4 : start= 997126144, size= 1060864, type=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC, uuid=A31B261E-E3EB-4671-BE66-F71AEEB51DB8, attrs="RequiredPartition GUID:63" /dev/nvme0n1p5 : start= 998187520, size= 2027520, type=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC, uuid=84072955-EDFD-4E05-84E6-C3A6C50CDB30, name="attrs=\x22RequiredPartition GUID:63d1.partitions:
label: gpt label-id: 8C0CB60E-93F5-4C14-B633-3852928F826C device: /dev/nvme0n1 unit: sectors first-lba: 34 last-lba: 1000215182 sector-size: 512 /dev/nvme0n1p1 : start= 2048, size= 1433600, type=C12A7328-F81F-11D2-BA4B-00A0C93EC93B, uuid=2AFFEC30-5F77-4C6B-BA7C-902A01A971E1, name="EFI system partition", attrs="GUID:63" /dev/nvme0n1p2 : start= 1435648, size= 262144, type=E3C9E316-0B5C-4DB8-817D-F92DF00215AE, uuid=E8336B4A-8C8F-48F5-85DE-E6237B7A372F, name="Microsoft reserved partition", attrs="GUID:63" /dev/nvme0n1p3 : start= 1697792, size= 995426761, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7, uuid=38131294-BD57-43F5-ACE4-2E1413614C9A, name="Basic data partition" /dev/nvme0n1p4 : start= 997126144, size= 1060864, type=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC, uuid=A31B261E-E3EB-4671-BE66-F71AEEB51DB8, attrs="RequiredPartition GUID:63" /dev/nvme0n1p5 : start= 998187520, size= 2027520, type=DE94BBA4-06D1-4D40-A16A-BFD50179D6AC, uuid=84072955-EDFD-4E05-84E6-C3A6C50CDB30, name="attrs=\x22RequiredPartition GUID:63"The third partition still seems to be too big (i.e. not shrunk), do you agree?
-
@madeyem said in FOG deploy: partitions 4 and 5 too big for disk:
... /dev/nvme0n1p5 : ... name="attrs=\x22RequiredPartition GUID:63" ...Wohoooo, it still has that same name/attrs problem. No idea why as I thought I had fixed that.
Edit: OMG, after some more digging I found that the change I made and committed to github didn’t make it into the test init I updated a few days after I asked you to test. My fault, because I work on another issue with someone else using the same test init. I am sorry. Please download the latest init from github once again, re-capture the image and we should see it work this time I am fairly sure. Pay attention to the
Init Version: 20211107 -
With the new init (20211107) I re-captured from a SSD machine and was finally able to deploy to a HDD machine. So I guess the fixes can be implemented in the next official release. Thank you Sebastian!
-
@madeyem Thanks heaps for testing again and letting me know! As well thanks for your patience.