EFI EXIT type chainloading failed

Eruthon

Your guidance has been very helpful and spot on. It works exactly as I wanted: the grubx64.efi is now shown in rEFInd menu after “Booting…”

But if I understand correctly, wouldn’t editing only the original refind.conf file by adding Debian option solve the problem, too? Maybe it could be added to the next release of FOG out of the box, because Ubuntu is already there.

george1421

@eruthon said in EFI EXIT type chainloading failed:

But if I understand correctly, wouldn’t editing only the original refind.conf file by adding Debian option solve the problem, too?

I guess I have 2 points here.

We created a second exit mode for refind in case the settings you have in the second refind conflict with efi exit booting for other hardware. If what you have in this second refind.conf file is acceptable for all of your computers on your campus then these edits are unnecessary. I didn’t know to what extent you would need to adjust the original refind.conf file (possibly we should have started there and then decided to go the hack path).
The FOG programmers have to keep the configuration generic so that it works for the largest population of hardware. Most don’t want an additional menu after exiting from FOG. I personally would like to see a few extra UEFI exit modes included in the FOG base so for unique hardware this process you did could be used by picking an alternate refind.conf file.

If updating the default refind.conf works for you and its good on all of your hardware, then just update the global UEFI exit mode in the FOG Configuration->FOG Settings panel.

Eruthon

@george1421 Great, thank you

chris_unit

@george1421

Hi there,

this might be exactly what i’m looking for, creating two refind exit options, one to windows, one to ubuntu.

I’ve followed your steps belo but i’m getting the following error when tryinig to use the newly created REFIND_EFIX2 option

george1421

@chris_unit well I don’t think its an exit mode that is causing what is in your picture.

Based on the error I’m going to guess at this.

Your computer is a uefi based one since you are using refind.
Memdisk is a bios based program that will not run on a uefi system.

You have apposing conditions here so the error message is understandable. Exec format error. That’s unrelated to the hack a proposed below.

chris_unit

@george1421 yes we’re are trying to be uefi across the board

so should we undo all the steps to create the for efix2 or is this still useable in a fully uefi system?

i’m not sure why memdisk is getting involved. is that part of refind?

the original refind option boots perfectly into windows, surely we’ve just created new option in fog which runs a duplicate config file which is identical to the original?

chris_unit

@george1421

can you check my syntax in case that’s the issue

   private static $_exitTypes = array();
    /**
     * Initializes the boot menu class
     *
     * @return void
     */
    public function __construct()
    {
        parent::__construct();
        $grubChain = 'chain -ar ${boot-url}/service/ipxe/grub.exe '
            . '--config-file="%s"';
        $sanboot = 'sanboot --no-describe --drive 0x80';
        $refind = sprintf(
            'imgfetch ${boot-url}/service/ipxe/refind.conf%s'
            . 'chain -ar ${boot-url}/service/ipxe/refind_x64.efi',
            "\n"
        );
        $refindx2 = sprintf(
             'imgfetch ${boot-url}/service/ipxe/refindx2.conf%s'
             . 'chain -ar ${boot-url}/service/ipxe/refind_x64.efi',
             "\n"
         );
        if (stripos($_REQUEST['arch'], 'i386') !== false) {
            //user i386 boot loaders instead
            $refind = sprintf(
                'imgfetch ${boot-url}/service/ipxe/refind.conf%s'
                . 'chain -ar ${boot-url}/service/ipxe/refind_ia32.efi',
                "\n"
            );
        }

        if (stripos($_REQUEST['arch'], 'arm') !== false) {
            //use arm boot loaders instead
            $refind = 'chain -ar ${boot-url}/service/ipxe/refind_aa64.efi';
        }

        $grub = array(
            'basic' => sprintf(
                $grubChain,
                'rootnoverify (hd0);chainloader +1'
            ),
            '1cd' => sprintf(
                $grubChain,
                'cdrom --init;map --hook;root (cd0);chainloader (cd0)"'
            ),
            '1fw' => sprintf(
                $grubChain,
                'find --set-root /BOOTMGR;chainloader /BOOTMGR"'
            )

george1421

@chris_unit

No on the undoing steps.

the default refind is configured correctly for windows. What you need to do for the refind 2 configuration is to configure the refind2.conf file so that it ONLY looks for the second OS so it won’t see windows and try to boot it.

george1421

@chris_unit what you posted looks right, but also remember that its been several months since I tweaked the code. If I remember right there was another spot in the code that needs to be updated to use the variable you just created.

chris_unit

@george1421 i’ve attached the two files if that helps (added txt to the end of the file name to allow upload)

bootmenu.class.php.txt service.class.php.txt

george1421

@chris_unit are you seeing a specific issue? If you have a coding issue the webui will become unresponsive. If the web ui is working without issue then you need to look into the config files to get them to do what you want.

note: I’m traveling for work at the moment so I’m going to be on and off for the next week.

chris_unit

@george1421 hi there

yes the issue is the photo i sent.

I’ve followed your below steps and with refind.conf being identical, refind_efix2 doesn’t work so it must be a syntax error as all we’ve done is create an identical button?

chris_unit

@george1421 i’m getting the following error when i try to use REFIND_EFIX2

alt text

george1421

@chris_unit I’m confused because the pictures you’ve posted mentioned memdisk. memdisk should not even be in the picture at the moment. memdisk is not compatible with uefi.

So lets try to debug this a bit more to see if its doing what we need. I want you to change in the FOG Configuration -> FOG Settings Expand all button. Now search for “uefi” you are looking for uefi exit mode or something like that. The default should be refind. Change that to the refind2 exit mode. Save the settings. Edit: also change the exit mode for bios to refind2 (that will give us the right results either way below)

Now I want you to go to this URL with a browser from a windows computer. http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00 That will give you the text behind the iPXE boot menu. Copy that text and post it here. We might have to add an additional parameter to tell it the client is uefi. I don’t have access to a fog server to test at the moment. Lets see if FOG is giving us what we need in the ipxe menu.

chris_unit

@george1421 said in EFI EXIT type chainloading failed:

http://<fog_server_ip>/fog/service/ipxe/boot.php?mac=00:00:00:00:00:00

Ok i’ve momentarily changed it to REFIND_EFIX2 and here’s the output of the menu

looks like it’s still set it to
sanboot --no-describe --drive 0x80 || goto MENU

#!ipxe
set fog-ip 192.168.80.3
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://192.168.80.3/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item os.Ubuntu.Desktop.20.04 Ubuntu Desktop 20.04
item os.Flame2020.CentOS7.6 Flame2020 CentOS7.6
item os.GParted Gparted
item os.Clonezilla Clonezilla
item os.Ubuntu.Desktop.18.04 Ubuntu Desktop 18.04
item os.Flame2021.CentOS7.7 Testing CentOS 7.7 with Flame
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:os.Ubuntu.Desktop.20.04
kernel tftp://${fog-ip}/os/ubuntu/Desk20.04/vmlinuz
initrd tftp://${fog-ip}/os/ubuntu/Desk20.04/initrd
imgargs vmlinuz initrd=initrd root=/dev/ram0 ramdisk_size=1800000 ip=dhcp url=http://${fog-ip}/ubuntu-20.04.2.0-desktop-amd64.iso ro
boot || goto MENU
param sysuuid ${uuid}
:os.Flame2020.CentOS7.6
kernel tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.6/vmlinuz
initrd tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.6/initrd.img
imgargs vmlinuz initrd=/os/autodesk/flame2020_CentOS7.6/initrd.img inst.repo=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.6 ks=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.6/ks_820.cfg
boot || goto MENU
param sysuuid ${uuid}
:os.GParted
kernel tftp://${fog-ip}/os/gparted/vmlinuz
initrd tftp://${fog-ip}/os/gparted/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live config components union=overlay username=user noswap noeject vga=788 fetch=http://${fog-ip}/gparted/filesystem.squashfs
boot || goto MENU
param sysuuid ${uuid}
:os.Clonezilla
kernel tftp://${fog-ip}/os/clonezilla/vmlinuz
initrd tftp://${fog-ip}/os/clonezilla/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live username=user union=overlay config components quiet noswap edd=on nomodeset nodmraid keyboard-layouts=en locales=en_US.UTF-8 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=tftp://${fog-ip}/os/clonezilla/filesystem.squashfs ocs_repository="nfs4://pixit-v60-10g.ldn.unit.tv:/mmfs1/data/anubis/.install/.clonezilla/images/" ocs_live_run="ocs-live -s"
boot || goto MENU
param sysuuid ${uuid}
:os.Ubuntu.Desktop.18.04
kernel tftp://${fog-ip}/os/ubuntu/Desk18.04/vmlinuz
initrd tftp://${fog-ip}/os/ubuntu/Desk18.04/initrd
imgargs vmlinuz initrd=initrd root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:/images/os/ubuntu/Desk18.04/ locale=en_US.UTF-8 keyboard-configuration/layoutcode=us mirror/country=US
boot || goto MENU
param sysuuid ${uuid}
:os.Flame2021.CentOS7.7
kernel tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.7/vmlinuz
initrd tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.7/initrd.img
imgargs vmlinuz initrd=/os/autodesk/centos7.7/initrd.img inst.repo=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.7 ks=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.7/ks_820.cfg
boot || goto MENU
param sysuuid ${uuid}
:bootme
chain -ar http://192.168.80.3/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

george1421

@chris_unit did you change both the uefi and bios global settings to refind2. That is what my edit in the previous post talked about. We need to pass an additional parameter with the mac address to get boot.php to send out the uefi exit mode. By setting both bios and uefi to refind (temporarily) it should send out the refind2 exit code. If it does then you have things programmed correctly.

chris_unit

@george1421 Hey there

Screenshot 2021-10-19 at 11.55.39.png

Here’s the output from a windows client

#!ipxe
set fog-ip 192.168.80.3
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://192.168.80.3/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
item os.Ubuntu.Desktop.20.04 Ubuntu Desktop 20.04
item os.Flame2020.CentOS7.6 Flame2020 CentOS7.6
item os.GParted Gparted
item os.Clonezilla Clonezilla
item os.Ubuntu.Desktop.18.04 Ubuntu Desktop 18.04
item os.Flame2021.CentOS7.7 Testing CentOS 7.7 with Flame
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=275000 web=http://192.168.80.3/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.80.3:/images/ storageip=192.168.80.3 nvme_core.default_ps_max_latency_us=0 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:os.Ubuntu.Desktop.20.04
kernel tftp://${fog-ip}/os/ubuntu/Desk20.04/vmlinuz
initrd tftp://${fog-ip}/os/ubuntu/Desk20.04/initrd
imgargs vmlinuz initrd=initrd root=/dev/ram0 ramdisk_size=1800000 ip=dhcp url=http://${fog-ip}/ubuntu-20.04.2.0-desktop-amd64.iso ro
boot || goto MENU
param sysuuid ${uuid}
:os.Flame2020.CentOS7.6
kernel tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.6/vmlinuz
initrd tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.6/initrd.img
imgargs vmlinuz initrd=/os/autodesk/flame2020_CentOS7.6/initrd.img inst.repo=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.6 ks=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.6/ks_820.cfg
boot || goto MENU
param sysuuid ${uuid}
:os.GParted
kernel tftp://${fog-ip}/os/gparted/vmlinuz
initrd tftp://${fog-ip}/os/gparted/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live config components union=overlay username=user noswap noeject vga=788 fetch=http://${fog-ip}/gparted/filesystem.squashfs
boot || goto MENU
param sysuuid ${uuid}
:os.Clonezilla
kernel tftp://${fog-ip}/os/clonezilla/vmlinuz
initrd tftp://${fog-ip}/os/clonezilla/initrd.img
imgargs vmlinuz initrd=initrd.img boot=live username=user union=overlay config components quiet noswap edd=on nomodeset nodmraid keyboard-layouts=en locales=en_US.UTF-8 ocs_live_run="ocs-live-general" ocs_live_extra_param="" ocs_live_batch=no net.ifnames=0 nosplash noprompt fetch=tftp://${fog-ip}/os/clonezilla/filesystem.squashfs ocs_repository="nfs4://pixit-v60-10g.ldn.unit.tv:/mmfs1/data/anubis/.install/.clonezilla/images/" ocs_live_run="ocs-live -s"
boot || goto MENU
param sysuuid ${uuid}
:os.Ubuntu.Desktop.18.04
kernel tftp://${fog-ip}/os/ubuntu/Desk18.04/vmlinuz
initrd tftp://${fog-ip}/os/ubuntu/Desk18.04/initrd
imgargs vmlinuz initrd=initrd root=/dev/nfs boot=casper netboot=nfs nfsroot=${fog-ip}:/images/os/ubuntu/Desk18.04/ locale=en_US.UTF-8 keyboard-configuration/layoutcode=us mirror/country=US
boot || goto MENU
param sysuuid ${uuid}
:os.Flame2021.CentOS7.7
kernel tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.7/vmlinuz
initrd tftp://${fog-ip}/os/autodesk/flame2020_CentOS7.7/initrd.img
imgargs vmlinuz initrd=/os/autodesk/centos7.7/initrd.img inst.repo=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.7 ks=nfs://pixit-v60-10g.ldn.unit.tv/mmfs1/data/anubis/.install/isos/flame2020_centos7.7/ks_820.cfg
boot || goto MENU
param sysuuid ${uuid}
:bootme
chain -ar http://192.168.80.3/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

george1421

@chris_unit ok looking at the menu something is missing in the code. Looking at the ipxe menu I also see how memdisk is getting in the mix here. I’m still traveling so I don’t have access to my home test lab. I’ll have to look over the code you provided to see what bit is missing.

george1421

@chris_unit in the bootmenu class file.

 self::$_exitTypes = array(
            'sanboot' => $sanboot,
            'grub' => $grub['basic'],
            'grub_first_hdd' => $grub['basic'],
            'grub_first_cdrom' => $grub['1cd'],
            'grub_first_found_windows' => $grub['1fw'],
            'refind_efi' => $refind,
            'refind_efix2' => $refind2,
            'exit' => 'exit',
        );

this

 'refind_efix2' => $refind2,

should be

 'refind_efix2' => $refindx2,

to match this code above

$refindx2 = sprintf(
             'imgfetch ${boot-url}/service/ipxe/refindx2.conf%s'
             . 'chain -ar ${boot-url}/service/ipxe/refind_x64.efi',
             "\n"
         );

chris_unit

@george1421 That’s great! that’s worked!

i now have two refind options with two seperate config files.

I just now need to figure out now how to set the second one refindx2 to boot into ubuntu partition.

EFI EXIT type chainloading failed

259

11.6k

17.1k

154.6k