FOG 1.5.9 Install issue on Ubuntu 20.04

[qpassa]

Hello:

First of all, apologies for my English level
I have a little issue with installfog.sh

The installation process stopped on Downloading kernel, init and fog-client binaries…, but if i try to download the file directly in the console with curl --silent -kOL https://github.com/FOGProject/fos/releases/download/1.5.9/init.xz >>error_logs/fog_error_1.5.9.log, the download is correct.

Can someone please help me?

Thanks in advance.

[qpassa]

@sebastian-roth

Solved!!!

The error was in /etc/default/isc-dhcp-server.
It was set to eth0 instead of ens18

I have more problems. I will open new posts if necessary

Thank you for all!

[Sebastian Roth]

@qpassa Ok, from what I see the DHCP config matches the IP setup and I can’t find any typo in there. Even tested the config posted on a test VM.

Maybe there is an interface linked in another config. Please run grep INTERFACE /etc/default/isc-dhcp-server and post output here.

Other than that you might also run the following commands and post output here:

systemctl restart isc-dhcp-server
journalctl -u isc-dhcp-server

On the last command you want to hit Shift-g to jump to the bottom of the log. Then copy and paste what you see. Then hit ‘Q’ to exit journalctl.

[qpassa]

@sebastian-roth

server:~$ ip a s

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens18: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 7a:31:3a:87:f3:0a brd ff:ff:ff:ff:ff:ff
    inet 172.120.1.250/24 brd 172.120.1.255 scope global ens18
       valid_lft forever preferred_lft forever
    inet6 fe80::7831:3aff:fe87:f30a/64 scope link
       valid_lft forever preferred_lft forever
3: ens19: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 72:c1:0a:58:c6:c1 brd ff:ff:ff:ff:ff:ff
    inet 172.31.99.224/24 brd 172.31.99.255 scope global ens19
       valid_lft forever preferred_lft forever
    inet6 fe80::70c1:aff:fe58:c6c1/64 scope link
       valid_lft forever preferred_lft forever

[Sebastian Roth]

@qpassa What output do you get from this command: ip a s

Please post output here.

[qpassa]

fogproject-1.5.9/bin# cat /etc/dhcp/dhcpd.conf

# DHCP Server Configuration file\n#see /usr/share/doc/dhcp*/dhcpd.conf.sample
# This file was created by FOG
#Definition of PXE-specific options
# Code 1: Multicast IP Address of bootfile
# Code 2: UDP Port that client should monitor for MTFTP Responses
# Code 3: UDP Port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of seconds a client must listen for activity before trying
#         to start a new MTFTP transfer
# Code 5: Number of seconds a client must listen before trying to restart
#         a MTFTP transfer
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16;
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
# Specify subnet of ether device you do NOT want service.
# For systems with two or more ethernet devices.
# subnet 136.165.0.0 netmask 255.255.0.0 {}
subnet 172.120.1.0 netmask 255.255.255.0{
    option subnet-mask 255.255.255.0;
    range dynamic-bootp 172.120.1.230 172.120.1.245;
    default-lease-time 21600;
    max-lease-time 43200;
    #option routers 0.0.0.0
    #option routers 0.0.0.0
    next-server 172.120.1.250;
    class "Legacy" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
        filename "undionly.kkpxe";
    }
    class "UEFI-32-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-32-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-64-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
        filename "ipxe.efi";
    }
    class "UEFI-64-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
        filename "ipxe.efi";
    }
    class "UEFI-64-3" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
        filename "ipxe.efi";
    }
    class "SURFACE-PRO-4" {
        match if substring(option vendor-class-identifier, 0, 32) = "PXEClient:Arch:00007:UNDI:003016";
        filename "ipxe.efi";
    }
    class "Apple-Intel-Netboot" {
        match if substring(option vendor-class-identifier, 0, 14) = "AAPLBSDPC/i386";
        option dhcp-parameter-request-list 1,3,17,43,60;
        if (option dhcp-message-type = 8) {
            option vendor-class-identifier "AAPLBSDPC";
            if (substring(option vendor-encapsulated-options, 0, 3) = 01:01:01) {
                # BSDP List
                option vendor-encapsulated-options 01:01:01:04:02:80:00:07:04:81:00:05:2a:09:0D:81:00:05:2a:08:69:50:58:45:2d:46:4f:47;
                filename "ipxe.efi";
            }
        }
    }
}

[qpassa]

@sebastian-roth said in FOG 1.5.9 Install issue on Ubuntu 20.04:

@qpassa Run systemctl status isc-dhcp-server and post the full output here.

fogproject-1.5.9/bin# systemctl status isc-dhcp-server

● isc-dhcp-server.service - ISC DHCP IPv4 server
     Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
     Active: failed (Result: exit-code) since Tue 2021-08-03 07:40:42 UTC; 4s ago
       Docs: man:dhcpd(8)
    Process: 41158 ExecStart=/bin/sh -ec      CONFIG_FILE=/etc/dhcp/dhcpd.conf;      if [ -f /etc/ltsp/dhcpd.conf ]; then CONFIG_FILE=/etc/ltsp>
   Main PID: 41158 (code=exited, status=1/FAILURE)

Aug 03 07:40:42 fog-server dhcpd[41158]:
Aug 03 07:40:42 fog-server dhcpd[41158]: If you think you have received this message due to a bug rather
Aug 03 07:40:42 fog-server dhcpd[41158]: than a configuration issue please read the section on submitting
Aug 03 07:40:42 fog-server dhcpd[41158]: bugs on either our web page at www.isc.org or in the README file
Aug 03 07:40:42 fog-server dhcpd[41158]: before submitting a bug.  These pages explain the proper
Aug 03 07:40:42 fog-server dhcpd[41158]: process and the information we find helpful for debugging.
Aug 03 07:40:42 fog-server dhcpd[41158]:
Aug 03 07:40:42 fog-server dhcpd[41158]: exiting.
Aug 03 07:40:42 fog-server systemd[1]: isc-dhcp-server.service: Main process exited, code=exited, status=1/FAILURE
Aug 03 07:40:42 fog-server systemd[1]: isc-dhcp-server.service: Failed with result 'exit-code'.

[qpassa]

This post is deleted!

[Sebastian Roth]

@qpassa Run systemctl status isc-dhcp-server and post the full output here.

[qpassa]

@exworker9to5

Finally I download the files of tmp manually and the installation continue.

But, it is failing on
“Aug 02 16:18:45 fog-server systemd[1]: isc-dhcp-server.service: Main process exited, code=exited, status=1/FAILURE”
“Aug 02 16:18:45 fog-server systemd[1]: isc-dhcp-server.service: Failed with result ‘exit-code’.”

[exworker9to5]

Follow this tutorial:
https://www.youtube.com/watch?v=sWorQSqrLOI&t=1025s