Certificate wrong server address

[d2freak82]

After deploying an image - I attempted to push out a snap in which I built and it kept failing authentication saying certificate is not from Fog CA.
My fog server is at 10.0.0.165 but the ip in the certifcate is 10.0.0.186 - that was also in the json file which I modified to show as 165.

Why on earth would it show a different ip like that? I checked my DNS records, those are set correctly, same with my DHCP. If I ping fog-server.domain it comes back with 165.
Not sure where this would get messy but any help would be appreciated.

[d2freak82]

we recreated the certificate through the server it now shows the correct ip address inside the certificate, going to reimage the client and see if it takes

[d2freak82]

once I reimaged again - it’s again trying to pull the certificate from 186, I wonder if that’s due to the image itself?
Maybe I built the client I pulled the image from and it had my old server name in it? Only thing I can think of, although I’m not sure how

[Sebastian Roth]

@d2freak82 Please post the full fog-client fog.log file here.

[d2freak82]

@sebastian-roth
I was able to figure it out - when I made the vm that I took my image from my fog-server address was different as I installed it many times trying to get it to work.
The machine I captured the image from had the fog-client pointed to the old server, once I removed the fog-client and reinstalled with the FQDN it did the trick.
Thank you