langage de programmation

george1421

@julio There are a few more but if you google for “”

https://github.com/PierreGode/Linux-Active-Directory-join-script/blob/master/ADconnection.sh

Details on connecting with command line (you make the bash script then)
https://www.redhat.com/sysadmin/linux-active-directory

The idea is when you build your golden/master image you have all of the drivers and software install needed to connect with AD.

Then you can create a script that runs the first time the linux computer boots after fog imaging. That script will connect the computer to AD. Once the script runs once then it will turn off and never run again. In MS Windows it has that feature in a batch script called setupcomplete.cmd. When windows is finished setting itself up and before it displays the login screen it runs that batch script to complete the windows setup with administrator defined tasks. You just need to duplicate that function with linux.

julio

@george1421 bonsoir george, vraiment je te dois une fiere chandel. pour le moment je travail sur l’installation de mes applications vscode, putty, dobe reader etc. je vais le faire avec ansible. apres cette etape, je travaillerais sur l’AD. merci beaucoup pour ton aide. je te tiendrais au courant si j’ai reussi à joindre mon domaine. et en passant j’utilise windows serveur 2016 et un ubuntu serveur 18.04. je travail sur virtualbox. et en passant je cherche comment avoir directement internet sur mes VM clientes après le déploiement.

george1421

@julio said in langage de programmation:

et en passant je cherche comment avoir directement internet sur mes VM clientes après le déploiement.

Not sure I understand. If you are using virtual box and you have a bridged network interface configured, your clients should be given an IP address of your LAN network. With that LAN IP address from your dhcp server your vm client computers should have internet access. If you are using NAT or host only then no internet .

julio

@george1421 Bonjour george. merci pour tout, j’ai réussi a insérer internet sur mes machines après le déploiement. je suis entrain de faire des scripts pour renommer mes postes clients ubuntu et débian. j’ai fais un script mais cela ne fonctionne pas. peut tu m’aidée à jetté un coup d’oeil merci bien.

cd /images/postdownloadscripts
nano renamehost.sh
#!/bin/bash
##détection de l’OS, 50 pour les Linux
if [[ “$osid” == “50” ]];then
##création d’un répertoire temporaire
mkdir /ext
##montage temporaire de la partition système du Linux
mount /dev/sda1 /ext

##changement du nom host de la machine définie dans l’interface web
echo $hostname > /ext/etc/hostname

##Démontage de la partition système
umount /ext

##Suppression du répertoire temporaire
rmdir /ext
fi

Rendre exécutable le script :
chmod +x renamehost.sh

Modifier le fichier fog.postdownload pour prendre en compte l’exécution du script en post déploiement :
nano fog.postdownload
.${postdownpath}renamehost.sh

julio

voici plus claire mon fichier en question pour renommer le nom de ma VM ubuntu.

Sebastian Roth

@julio When you say it’s not working, does that mean you see an error somewhere or it just doesn’t seem to change the hostname?

I would start by booting up Ubuntu after the deploy and check what you see in /etc/hostname. Is it the correct hostname that means the script did execute correctly but it might not be enough of a change for Ubuntu to accept this new hostname. If it’s not changed than you should start looking at the script again and add more statements for debugging, e.g.

#!/bin/bash
echo "Hello, this is my postdownload script, press ENTER to proceed"
read
##détection de l’OS, 50 pour les Linux
if [[ “$osid” == “50” ]];then
echo "OK, osid is 50/Linux"
...

nano fog.postdownload
.${postdownpath}renamehost.sh

Be careful here. You need to have a space between the dot and the dollar character for this to work!!

. ${postdownpath}renamehost.sh

One important thing is that the script needs to have the right line endings. So if you created that script using Windows notepad it will not work. Seems like you used nano but I just want to make sure!

julio

@sebastian-roth Bonjour roth. oui j’ai utliser nano. mais le nom de ma machine n’a pas changer. ci join mes fichiers.

Sebastian Roth

@julio Looking at the script again I see an issue with the mount command. Should be mount /dev/sda1 /ext (space in between!)

george1421

@julio OK explaining this may be a little hard because of the language differences but lets try.

I have examples of postdownload scripts for Windows. The concept is very similar for linux. The logic and flow have already been thought out you just need to translate for linux. You are doing a few steps wrong. I will follow on in the next post after I explain my thought here

https://forums.fogproject.org/topic/11126/using-fog-postinstall-scripts-for-windows-driver-injection-2017-ed

If you have windows computers and want to install hardware specific drivers then you need all of the scripts in that post. If you only have linux computers then the only base script you need is fog.custominstall

The beginning script looks like this

#!/bin/bash
. /usr/share/fog/lib/funcs.sh
[[ -z $postdownpath ]] && postdownpath="/images/postdownloadscripts/"
case $osid in
    5|6|7|9)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    ntfsstatus="$?"
                    if [[ ! $ntfsstatus -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/windows && ! -d /ntfs/Windows && ! -d /ntfs/WINDOWS ]]; then
                        echo "Not found"
                        umount /ntfs >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not NTFS filesystem"
                    ;;
            esac
        done
        if [[ ! $ntfsstatus -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        . ${postdownpath}fog.copydrivers
        # . ${postdownpath}fog.updateunattend
        umount /ntfs
        ;;
    *)
        echo "Non-Windows Deployment"
        debugPause
        return
        ;;
esac

If you can read program code you can see it checks to see if $osid is a ms windows type. The it uses some fog built in function to get the hard drive name, then get the partitions on the hard drive. It loops through the partitions checking to see if there is a directory called windows on that partition. We are using that to find the C drive on windows computer. Once we find the windows directory then we call the copy drivers script. At the end then we unmount the /ntfs directory and exit

In your case you can use the same logic but for $osid of 50. Then loop through the partitions looking for the /etc directory on the mounted share of /ntfs. The programming flow for windows is very close to the programming flow I can see for linux.

george1421

@sebastian-roth said in langage de programmation:

Should be mount /dev/sda1 /ext (space in between!)

Yes I saw that too.

julio

@george1421 salut george, oui j’utilise uniquement des ordinateurs linux et je voulais savoir j’utlise le script que tu viens de m’envoyer et comment je pourrais modifier cela à mon besion.

par exemple je vois partition ntfs cà c’est windows pour linux je remplace avec ext4 ou ext. et le osid 50 mais là je vois osid in 5/6/9 etc.

george1421

@julio I was thinking something like this:

#!/bin/bash
. /usr/share/fog/lib/funcs.sh
[[ -z $postdownpath ]] && postdownpath="/images/postdownloadscripts/"
case $osid in
    5|6|7|9)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    ntfsstatus="$?"
                    if [[ ! $ntfsstatus -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/windows && ! -d /ntfs/Windows && ! -d /ntfs/WINDOWS ]]; then
                        echo "Not found"
                        umount /ntfs >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not NTFS filesystem"
                    ;;
            esac
        done
        if [[ ! $ntfsstatus -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        . ${postdownpath}fog.copydrivers
        # . ${postdownpath}fog.updateunattend
        umount /ntfs
        ;;
   50)
        clear
        [[ ! -d /ntfs ]] && mkdir -p /ntfs
        getHardDisk
        if [[ -z $hd ]]; then
            handleError "Could not find hdd to use"
        fi
        getPartitions $hd
        for part in $parts; do
            umount /ntfs >/dev/null 2>&1
            fsTypeSetting "$part"
            case $fstype in
                ntfs)
                    dots "Testing partition $part"
                    ntfs-3g -o force,rw $part /ntfs
                    ntfsstatus="$?"
                    if [[ ! $ntfsstatus -eq 0 ]]; then
                        echo "Skipped"
                        continue
                    fi
                    if [[ ! -d /ntfs/etc ]]; then
                        echo "Not found"
                        umount /ntfs >/dev/null 2>&1
                        continue
                    fi
                    echo "Success"
                    break
                    ;;
                *)
                    echo " * Partition $part not linux root filesystem"
                    ;;
            esac
        done
        if [[ ! $ntfsstatus -eq 0 ]]; then
            echo "Failed"
            debugPause
            handleError "Failed to mount $part ($0)\n    Args: $*"
        fi
        echo "Done"
        debugPause
        # at this point the root file system will be mounted on /ntfs
        . ${postdownpath}fog.renamehost.sh
        umount /ntfs
        ;;
    *)
        echo "Unknown OS Deployment"
        debugPause
        return
        ;;
esac

Understand I did not test this code at all. This code may be more complex than you need if only you set the hostname. The script you have will work if you fix what Sebastian posted about your mount command. I just wanted to show you that you can make the core more responsive if your root partition is not always /dev/sda1. In some cases like UEFI disk format /dev/sda1 is the UEFI boot partition and not the OS root partition. Your code would fail if that was the case. Or if your hard drive is a NVMe type then /dev/sda (points to sata) would be wrong and the script would fail because nvme disk have a different partition structure.

julio

@sebastian-roth oui j’ai modifier mon fichier mais jusque là pas de changement au niveau du hotsname. mount /dev/sda1 /ext

julio

@george1421 en passant george je travail sur des VM sur virtualbox et lors de la création de mon pc ubuntu desktop, j’ai partitionner mon dique dur virtuel. es ce cela le problème.

julio

@george1421 oui george, voici à quoi ressemble ma partition sur la machine cliente ubuntu.

george1421

@julio said in langage de programmation:

en passant george je travail sur des VM sur virtualbox et lors de la création de mon pc ubuntu desktop, j’ai partitionner mon dique dur virtuel. es ce cela le problème.

No works the same. I was just warning if you use real hardware that it could change the way your script runs because hardware changes.

julio

@george1421 juste pour me rassurer, je ne vais pas par hasard modifier mon fichier host…

george1421

@julio I will give you a hint to maybe help you with your scripting.

FOG has a special mode you can use to debug your programs right on the target computer. So do the following.

Register your VM with fog (if you have not done so already)
Schedule a new deployment task, but before you press the Schedule Task button, enable the Debug checkbox, then schedule the task.
PXE boot the target computer.
After several screens of text, you can clear by pressing the ENTER key. You will land on the FOS LINUX command prompt.

Now run lsblk to find your hard drive. See if you can find from lsblk your root partition.

Now manually run

mkdir -p /ntfs
mount /dev/sdaX /ntfs

Just as a test run the echo command the variable ${hostname} will not be set yet so you can’t use it here. But you can find out the right location and partition to use. You will not see all of the loop devices that ubuntu creates so it will be clear what partitions you want.

george1421

@julio said in langage de programmation:

juste pour me rassurer, je ne vais pas par hasard modifier mon fichier host…

This is why I suggested to test your program using FOS Linux in debug mode. No chance to break your FOG server.

julio

@george1421 j’essaye ça et je te tiens au courant merci beaucoup.

langage de programmation

187

11.6k

17.1k

154.6k