Image Store Corrupt Unable to locate MBR.

[JimmyJ0516]

@george1421 I posted the results below. Also, this is not the first time using the computer I have captured the image before and never had issues. I also took another computer model and capture the image of that and also had the same issue the d1.mbr file is missing. I have also post the results of the differences.

[Thu Jun 18 root@fogclient ~]# lsblk
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
|-sda1   8:1    0   579M  0 part 
`-sda2   8:2    0 465.2G  0 part 
[Thu Jun 18 root@fogclient ~]# fdisk -l /dev/sda
Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Disk model: ST500DM002-1SB10
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disklabel type: dos
Disk identifier: 0x0105e8f5

Device     Boot   Start       End   Sectors   Size Id Type
/dev/sda1  *       2048   1187839   1185792   579M  7 HPFS/NTFS/exFAT
/dev/sda2       1187840 976771071 975583232 465.2G  7 HPFS/NTFS/exFAT
[Thu Jun 18 root@fogclient ~]# 

This is from the server itself

/images/OPT7040-2019:
total 18393216
drwxrwxrwx  2 fogproject root        4096 Nov 18  2019 .
drwxrwxrwx 26 fogproject root        4096 Jun 18 09:38 ..
-rwxrwxrwx  1 fogproject root     1048576 Jul  1  2019 d1.mbr
-rwxrwxrwx  1 fogproject root   392718467 Jul  1  2019 d1p1.img
-rwxrwxrwx  1 fogproject root 18440862240 Jul  1  2019 d1p2.img
-rwxrwxrwx  1 fogproject root         190 Jul  1  2019 d1.partitions
-rwxrwxrwx  1 fogproject root          15 Jul  1  2019 d1.size

/images/OPT7040-2020:
total 19968056
drwxrwxrwx  2 root       root        4096 Jun 17 12:20 .
drwxrwxrwx 26 fogproject root        4096 Jun 18 09:38 ..
-rwxrwxrwx  1 root       root   424917799 Jun 17 12:14 d1p1.img
-rwxrwxrwx  1 root       root 20022329625 Jun 17 12:20 d1p2.img
-rwxrwxrwx  1 root       root         190 Jun 17 12:13 d1.partitions
-rwxrwxrwx  1 root       root          15 Jun 17 12:13 d1.size

/images/OPT3040-2019:
total 16517136
drwxrwxrwx  2 fogproject root        4096 Jun 28  2019 .
drwxrwxrwx 26 fogproject root        4096 Jun 18 09:38 ..
-rwxrwxrwx  1 fogproject root     1048576 Jun 28  2019 d1.mbr
-rwxrwxrwx  1 fogproject root   382515569 Jun 28  2019 d1p1.img
-rwxrwxrwx  1 fogproject root    13559174 Jun 28  2019 d1p2.img
-rwxrwxrwx  1 fogproject root    11096900 Jun 28  2019 d1p3.img
-rwxrwxrwx  1 fogproject root 16505295550 Jun 28  2019 d1p4.img
-rwxrwxrwx  1 fogproject root         861 Jun 28  2019 d1.partitions
-rwxrwxrwx  1 fogproject root          15 Jun 28  2019 d1.size

/images/OPT-3040-IMG:
total 11964976
drwxrwxrwx  2 root       root        4096 Jun 18 09:38 .
drwxrwxrwx 26 fogproject root        4096 Jun 18 09:38 ..
-rwxrwxrwx  1 root       root   424782473 Jun 18 09:33 d1p1.img
-rwxrwxrwx  1 root       root 11827327909 Jun 18 09:38 d1p2.img
-rwxrwxrwx  1 root       root         190 Jun 18 09:32 d1.partitions
-rwxrwxrwx  1 root       root          15 Jun 18 09:32 d1.size

[Sebastian Roth]

Possibly those regexp errors are fixed in the latest already… see fix here: https://github.com/FOGProject/fos/commit/80e240dee4c463c6ec62640edbe48d343098de6e (I would think this was after 1.5.8 released… not exactly sure though)

[JimmyJ0516]

@Sebastian-Roth Do you think and again I’m just throwing it out there. What if I downgrade to 1.5.7. All of the images I created were on 1.5.7. Now that I am capturing images for the first time on 1.5.8 I am having these issues. If I do downgrade do I just re-run the installer for 1.5.7? As well as you mentioned all of the images before the news created the owner is fogproject and the new ones have root as the owner.

[george1421]

@JimmyJ0516 Instead of going backwards, lets take you to 1.5.9RC2. That RC version will probably become the next 1.5.9 GA release. There hasn’t been any bug reports against that RC release so far.

If you used the git method to install FOG change to that directory (typ /root/fogproject) and issue the following commands.

git checkout dev-branch
git pull
cd bin
./installfog.sh

Now when 1.5.9 comes out you will want to switch back to the master branch to get 1.5.9.

git checkout master
git pull
... and so on

[JimmyJ0516]

@george1421 I have been using the TAR/GZ archive way of downloading the updates and all of the updates are stored in /opt is that a problem?

[george1421]

@JimmyJ0516 With the tarball releases you can only install GA releases of FOG. The git method allows for a bit more flexibility.

[JimmyJ0516]

@george1421 Understood so I am moving into my /opt directory where all of the versions of Fog are stored and then I proceed to run the command you gave me correct?

[george1421]

@JimmyJ0516 To use the git method you can run this command from the /opt directory (my preference) or from /root

cd to that directory and then issue the following commands.

git clone https://github.com/FOGProject/fogproject.git
cd fogproject

Then issue the commands from the previous post to switch to the dev branch and reinstall FOG.

Note if git is not installed then you will need to use your linux distro’s tools to install git.

[JimmyJ0516]

@george1421 I have successfully updated and I am now on 1.5.9-RC2.9. I will try and capture a image now and see where this takes me.

[JimmyJ0516]

@george1421 Actually this did fix the issue. It has now captured the d1.mbr file. I am now going to deploy the image to make sure it works 100%. Thank you

[JimmyJ0516]

@george1421 Alrighty Thank you so much for helping. Everything is now working fine with no issues at all. Last question lol how do I make this issue solved or does someone take care of that lol?

[george1421]

@JimmyJ0516 I took care of it for you. Basically under topic tools change the state as ask as question, then go back into topic tools and mark as solved.

[JimmyJ0516]

@george1421 Thanks again