TFTP need enter manually

[Dinesh]

Client system is Boot with PXE and after dhcp is assigned to that system and thereafter every time TFTP IP address need to enter manually, is any thing possible to configure in default settings in fog server.i’m using latest version fog server 1.5.7.

[Sebastian Roth]

@Dinesh What is serving DHCP in your network? I am sure it’s not the FOG server but a different system. Please post the configuration of that here, picture if Windows DHCP or config file…

[Dinesh]

@Sebastian-Roth This is my DHCP Server . . . . . . . . . . . : 192.168.6.15 shown in windows

[Sebastian Roth]

@Dinesh Who is managing the DHCP server? Who changed the settings to point it to work with FOG?

[Dinesh]

@Sebastian-Roth im only managing dhcp server. i’m only install fog server.

[george1421]

@Dinesh The problem is that your dhcp server isn’t telling the pxe booting client the ip address of the fog server. I have the idea that you have 2 dhcp servers on your network. One is configured correctly because it tells the PXE rom the name of the of boot server and boot file name because iPXE is starting, but then when iPXE starts it sends out a dhcp request again and the second dhcp server answers without the boot server information that is why iPXE asks.

If you look in the picture, the IP addresses coming from your dhcp server look… strange. The pxe booting computer gets an IP address of 192.168.6.14, but the gateway is 192.168.6.15. This is not something I would expect to see.

[Quazz]

The problem here is that you have 2 DHCP Servers.

192.168.6.15 and 192.168.6.152