"fog.conf" Missing Error 503 on the web site



  • Hi guys how are you?
    I have a problem with mi Fog Project environment LAB, my “fog.conf on /etc/php-fpm.d/” (is missing. I create a one but is empty
    i need reinstall all the system? what is the troubleshooting?

    I have a Centos 7
    Thx!



  • @Sebastian-Roth
    thx, cp this comand’s and now is works!!!

    <3

    Solved!


  • Developer

    @Theangelo2 Not sure if that helps but my CentOS 7 /etc/php-fpm.d/www.conf looks like this:

    ; Start a new pool named 'www'.
    ; the variable $pool can we used in any directive and will be replaced by the
    ; pool name ('www' here)
    [www]
    
    ; Per pool prefix
    ; It only applies on the following directives:
    ; - 'access.log'
    ; - 'slowlog'
    ; - 'listen' (unixsocket)
    ; - 'chroot'
    ; - 'chdir'
    ; - 'php_values'
    ; - 'php_admin_values'
    ; When not set, the global prefix (or @php_fpm_prefix@) applies instead.
    ; Note: This directive can also be relative to the global prefix.
    ; Default Value: none
    ;prefix = /path/to/pools/$pool
    
    ; Unix user/group of processes
    ; Note: The user is mandatory. If the group is not set, the default user's group
    ;       will be used.
    ; RPM: apache user chosen to provide access to the same directories as httpd
    user = apache
    ; RPM: Keep a group allowed to write in log dir.
    group = apache
    
    ; The address on which to accept FastCGI requests.
    ; Valid syntaxes are:
    ;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
    ;                            a specific port;
    ;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
    ;                            a specific port;
    ;   'port'                 - to listen on a TCP socket to all addresses
    ;                            (IPv6 and IPv4-mapped) on a specific port;
    ;   '/path/to/unix/socket' - to listen on a unix socket.
    ; Note: This value is mandatory.
    listen = 127.0.0.1:9000
    
    ; Set listen(2) backlog.
    ; Default Value: 511
    ;listen.backlog = 511
    
    ; Set permissions for unix socket, if one is used. In Linux, read/write
    ; permissions must be set in order to allow connections from a web server.
    ; Default Values: user and group are set as the running user
    ;                 mode is set to 0660
    ;listen.owner = nobody
    ;listen.group = nobody
    ;listen.mode = 0660
    
    ; When POSIX Access Control Lists are supported you can set them using
    ; these options, value is a comma separated list of user/group names.
    ; When set, listen.owner and listen.group are ignored
    ;listen.acl_users = apache,nginx
    ;listen.acl_groups =
    
    ; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
    ; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
    ; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
    ; must be separated by a comma. If this value is left blank, connections will be
    ; accepted from any ip address.
    ; Default Value: any
    listen.allowed_clients = 127.0.0.1
    
    ; Specify the nice(2) priority to apply to the pool processes (only if set)
    ; The value can vary from -19 (highest priority) to 20 (lower priority)
    ; Note: - It will only work if the FPM master process is launched as root
    ;       - The pool processes will inherit the master process priority
    ;         unless it specified otherwise
    ; Default Value: no set
    ; process.priority = -19
    
    ; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
    ; or group is differrent than the master process user. It allows to create process
    ; core dump and ptrace the process for the pool user.
    ; Default Value: no
    ; process.dumpable = yes
    
    ; Choose how the process manager will control the number of child processes.
    ; Possible Values:
    ;   static  - a fixed number (pm.max_children) of child processes;
    ;   dynamic - the number of child processes are set dynamically based on the
    ;             following directives. With this process management, there will be
    ;             always at least 1 children.
    ;             pm.max_children      - the maximum number of children that can
    ;                                    be alive at the same time.
    ;             pm.start_servers     - the number of children created on startup.
    ;             pm.min_spare_servers - the minimum number of children in 'idle'
    ;                                    state (waiting to process). If the number
    ;                                    of 'idle' processes is less than this
    ;                                    number then some children will be created.
    ;             pm.max_spare_servers - the maximum number of children in 'idle'
    ;                                    state (waiting to process). If the number
    ;                                    of 'idle' processes is greater than this
    ;                                    number then some children will be killed.
    ;  ondemand - no children are created at startup. Children will be forked when
    ;             new requests will connect. The following parameter are used:
    ;             pm.max_children           - the maximum number of children that
    ;                                         can be alive at the same time.
    ;             pm.process_idle_timeout   - The number of seconds after which
    ;                                         an idle process will be killed.
    ; Note: This value is mandatory.
    pm = dynamic
    
    ; The number of child processes to be created when pm is set to 'static' and the
    ; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
    ; This value sets the limit on the number of simultaneous requests that will be
    ; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
    ; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
    ; CGI. The below defaults are based on a server without much resources. Don't
    ; forget to tweak pm.* to fit your needs.
    ; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
    ; Note: This value is mandatory.
    pm.max_children = 50
    
    ; The number of child processes created on startup.
    ; Note: Used only when pm is set to 'dynamic'
    ; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
    pm.start_servers = 5
    
    ; The desired minimum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.min_spare_servers = 5
    
    ; The desired maximum number of idle server processes.
    ; Note: Used only when pm is set to 'dynamic'
    ; Note: Mandatory when pm is set to 'dynamic'
    pm.max_spare_servers = 10
    
    ; The number of seconds after which an idle process will be killed.
    ; Note: Used only when pm is set to 'ondemand'
    ; Default Value: 10s
    ;pm.process_idle_timeout = 10s;
    
    ; The number of requests each child process should execute before respawning.
    ; This can be useful to work around memory leaks in 3rd party libraries. For
    ; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
    ; Default Value: 0
    pm.max_requests = 2000
    
    ; The URI to view the FPM status page. If this value is not set, no URI will be
    ; recognized as a status page. It shows the following informations:
    ;   pool                 - the name of the pool;
    ;   process manager      - static, dynamic or ondemand;
    ;   start time           - the date and time FPM has started;
    ;   start since          - number of seconds since FPM has started;
    ;   accepted conn        - the number of request accepted by the pool;
    ;   listen queue         - the number of request in the queue of pending
    ;                          connections (see backlog in listen(2));
    ;   max listen queue     - the maximum number of requests in the queue
    ;                          of pending connections since FPM has started;
    ;   listen queue len     - the size of the socket queue of pending connections;
    ;   idle processes       - the number of idle processes;
    ;   active processes     - the number of active processes;
    ;   total processes      - the number of idle + active processes;
    ;   max active processes - the maximum number of active processes since FPM
    ;                          has started;
    ;   max children reached - number of times, the process limit has been reached,
    ;                          when pm tries to start more children (works only for
    ;                          pm 'dynamic' and 'ondemand');
    ; Value are updated in real time.
    ; Example output:
    ;   pool:                 www
    ;   process manager:      static
    ;   start time:           01/Jul/2011:17:53:49 +0200
    ;   start since:          62636
    ;   accepted conn:        190460
    ;   listen queue:         0
    ;   max listen queue:     1
    ;   listen queue len:     42
    ;   idle processes:       4
    ;   active processes:     11
    ;   total processes:      15
    ;   max active processes: 12
    ;   max children reached: 0
    ;
    ; By default the status page output is formatted as text/plain. Passing either
    ; 'html', 'xml' or 'json' in the query string will return the corresponding
    ; output syntax. Example:
    ;   http://www.foo.bar/status
    ;   http://www.foo.bar/status?json
    ;   http://www.foo.bar/status?html
    ;   http://www.foo.bar/status?xml
    ;
    ; By default the status page only outputs short status. Passing 'full' in the
    ; query string will also return status for each pool process.
    ; Example:
    ;   http://www.foo.bar/status?full
    ;   http://www.foo.bar/status?json&full
    ;   http://www.foo.bar/status?html&full
    ;   http://www.foo.bar/status?xml&full
    ; The Full status returns for each process:
    ;   pid                  - the PID of the process;
    ;   state                - the state of the process (Idle, Running, ...);
    ;   start time           - the date and time the process has started;
    ;   start since          - the number of seconds since the process has started;
    ;   requests             - the number of requests the process has served;
    ;   request duration     - the duration in µs of the requests;
    ;   request method       - the request method (GET, POST, ...);
    ;   request URI          - the request URI with the query string;
    ;   content length       - the content length of the request (only with POST);
    ;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
    ;   script               - the main script called (or '-' if not set);
    ;   last request cpu     - the %cpu the last request consumed
    ;                          it's always 0 if the process is not in Idle state
    ;                          because CPU calculation is done when the request
    ;                          processing has terminated;
    ;   last request memory  - the max amount of memory the last request consumed
    ;                          it's always 0 if the process is not in Idle state
    ;                          because memory calculation is done when the request
    ;                          processing has terminated;
    ; If the process is in Idle state, then informations are related to the
    ; last request the process has served. Otherwise informations are related to
    ; the current request being served.
    ; Example output:
    ;   ************************
    ;   pid:                  31330
    ;   state:                Running
    ;   start time:           01/Jul/2011:17:53:49 +0200
    ;   start since:          63087
    ;   requests:             12808
    ;   request duration:     1250261
    ;   request method:       GET
    ;   request URI:          /test_mem.php?N=10000
    ;   content length:       0
    ;   user:                 -
    ;   script:               /home/fat/web/docs/php/test_mem.php
    ;   last request cpu:     0.00
    ;   last request memory:  0
    ;
    ; Note: There is a real-time FPM status monitoring sample web page available
    ;       It's available in: @EXPANDED_DATADIR@/fpm/status.html
    ;
    ; Note: The value must start with a leading slash (/). The value can be
    ;       anything, but it may not be a good idea to use the .php extension or it
    ;       may conflict with a real PHP file.
    ; Default Value: not set
    ;pm.status_path = /status
    
    ; The ping URI to call the monitoring page of FPM. If this value is not set, no
    ; URI will be recognized as a ping page. This could be used to test from outside
    ; that FPM is alive and responding, or to
    ; - create a graph of FPM availability (rrd or such);
    ; - remove a server from a group if it is not responding (load balancing);
    ; - trigger alerts for the operating team (24/7).
    ; Note: The value must start with a leading slash (/). The value can be
    ;       anything, but it may not be a good idea to use the .php extension or it
    ;       may conflict with a real PHP file.
    ; Default Value: not set
    ;ping.path = /ping
    
    ; This directive may be used to customize the response of a ping request. The
    ; response is formatted as text/plain with a 200 response code.
    ; Default Value: pong
    ;ping.response = pong
    
    ; The access log file
    ; Default: not set
    ;access.log = log/$pool.access.log
    
    ; The access log format.
    ; The following syntax is allowed
    ;  %%: the '%' character
    ;  %C: %CPU used by the request
    ;      it can accept the following format:
    ;      - %{user}C for user CPU only
    ;      - %{system}C for system CPU only
    ;      - %{total}C  for user + system CPU (default)
    ;  %d: time taken to serve the request
    ;      it can accept the following format:
    ;      - %{seconds}d (default)
    ;      - %{miliseconds}d
    ;      - %{mili}d
    ;      - %{microseconds}d
    ;      - %{micro}d
    ;  %e: an environment variable (same as $_ENV or $_SERVER)
    ;      it must be associated with embraces to specify the name of the env
    ;      variable. Some exemples:
    ;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
    ;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
    ;  %f: script filename
    ;  %l: content-length of the request (for POST request only)
    ;  %m: request method
    ;  %M: peak of memory allocated by PHP
    ;      it can accept the following format:
    ;      - %{bytes}M (default)
    ;      - %{kilobytes}M
    ;      - %{kilo}M
    ;      - %{megabytes}M
    ;      - %{mega}M
    ;  %n: pool name
    ;  %o: output header
    ;      it must be associated with embraces to specify the name of the header:
    ;      - %{Content-Type}o
    ;      - %{X-Powered-By}o
    ;      - %{Transfert-Encoding}o
    ;      - ....
    ;  %p: PID of the child that serviced the request
    ;  %P: PID of the parent of the child that serviced the request
    ;  %q: the query string
    ;  %Q: the '?' character if query string exists
    ;  %r: the request URI (without the query string, see %q and %Q)
    ;  %R: remote IP address
    ;  %s: status (response code)
    ;  %t: server time the request was received
    ;      it can accept a strftime(3) format:
    ;      %d/%b/%Y:%H:%M:%S %z (default)
    ;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
    ;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
    ;  %T: time the log has been written (the request has finished)
    ;      it can accept a strftime(3) format:
    ;      %d/%b/%Y:%H:%M:%S %z (default)
    ;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
    ;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
    ;  %u: remote user
    ;
    ; Default: "%R - %u %t \"%m %r\" %s"
    ;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
    
    ; The log file for slow requests
    ; Default Value: not set
    ; Note: slowlog is mandatory if request_slowlog_timeout is set
    slowlog = /var/log/php-fpm/www-slow.log
    
    ; The timeout for serving a single request after which a PHP backtrace will be
    ; dumped to the 'slowlog' file. A value of '0s' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_slowlog_timeout = 0
    
    ; The timeout for serving a single request after which the worker process will
    ; be killed. This option should be used when the 'max_execution_time' ini option
    ; does not stop script execution for some reason. A value of '0' means 'off'.
    ; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
    ; Default Value: 0
    ;request_terminate_timeout = 0
    
    ; Set open file descriptor rlimit.
    ; Default Value: system defined value
    ;rlimit_files = 1024
    
    ; Set max core size rlimit.
    ; Possible Values: 'unlimited' or an integer greater or equal to 0
    ; Default Value: system defined value
    ;rlimit_core = 0
    
    ; Chroot to this directory at the start. This value must be defined as an
    ; absolute path. When this value is not set, chroot is not used.
    ; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
    ; of its subdirectories. If the pool prefix is not set, the global prefix
    ; will be used instead.
    ; Note: chrooting is a great security feature and should be used whenever
    ;       possible. However, all PHP paths will be relative to the chroot
    ;       (error_log, sessions.save_path, ...).
    ; Default Value: not set
    ;chroot =
    
    ; Chdir to this directory at the start.
    ; Note: relative path can be used.
    ; Default Value: current directory or / when chroot
    ;chdir = /var/www
    
    ; Redirect worker stdout and stderr into main error log. If not set, stdout and
    ; stderr will be redirected to /dev/null according to FastCGI specs.
    ; Note: on highloaded environement, this can cause some delay in the page
    ; process time (several ms).
    ; Default Value: no
    ;catch_workers_output = yes
    
    ; Clear environment in FPM workers
    ; Prevents arbitrary environment variables from reaching FPM worker processes
    ; by clearing the environment in workers before env vars specified in this
    ; pool configuration are added.
    ; Setting to "no" will make all environment variables available to PHP code
    ; via getenv(), $_ENV and $_SERVER.
    ; Default Value: yes
    ;clear_env = no
    
    ; Limits the extensions of the main script FPM will allow to parse. This can
    ; prevent configuration mistakes on the web server side. You should only limit
    ; FPM to .php extensions to prevent malicious users to use other extensions to
    ; exectute php code.
    ; Note: set an empty value to allow all extensions.
    ; Default Value: .php
    ;security.limit_extensions = .php .php3 .php4 .php5 .php7
    
    ; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
    ; the current environment.
    ; Default Value: clean env
    ;env[HOSTNAME] = $HOSTNAME
    ;env[PATH] = /usr/local/bin:/usr/bin:/bin
    ;env[TMP] = /tmp
    ;env[TMPDIR] = /tmp
    ;env[TEMP] = /tmp
    
    ; Additional php.ini defines, specific to this pool of workers. These settings
    ; overwrite the values previously defined in the php.ini. The directives are the
    ; same as the PHP SAPI:
    ;   php_value/php_flag             - you can set classic ini defines which can
    ;                                    be overwritten from PHP call 'ini_set'.
    ;   php_admin_value/php_admin_flag - these directives won't be overwritten by
    ;                                     PHP call 'ini_set'
    ; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
    
    ; Defining 'extension' will load the corresponding shared extension from
    ; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
    ; overwrite previously defined php.ini values, but will append the new value
    ; instead.
    
    ; Note: path INI options can be relative and will be expanded with the prefix
    ; (pool, global or @prefix@)
    
    ; Default Value: nothing is defined by default except the values in php.ini and
    ;                specified at startup with the -d argument
    ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
    ;php_flag[display_errors] = off
    php_admin_value[error_log] = /var/log/php-fpm/www-error.log
    php_admin_flag[log_errors] = on
    php_admin_value[memory_limit] = 256M
    
    ; Set the following data paths to directories owned by the FPM process user.
    ;
    ; Do not change the ownership of existing system directories, if the process
    ; user does not have write permission, create dedicated directories for this
    ; purpose.
    ;
    ; See warning about choosing the location of these directories on your system
    ; at http://php.net/session.save-path
    php_value[session.save_handler] = files
    php_value[session.save_path]    = /var/lib/php/session
    php_value[soap.wsdl_cache_dir]  = /var/lib/php/wsdlcache
    ;php_value[opcache.file_cache]  = /var/lib/php/opcache
    


  • You’re right, I got confused, the file that disappeared is: www.conf

    Now the problem is, how do I regenerate that file? or where I can get it from.

    I searched with a find the fog.conf and moved it to the mentioned folder.


  • Developer

    @Theangelo2 I think you are mixing two things up here. For the FOG web UI to work you need 1. Apache webserver and 2. PHP (nowadays usually as PHP-FPM).

    While the FOG installer makes slight adjustments to the config of PHP-FPM (/etc/php-fpm.d/www.conf for CentOS 7) we don’t generate a PHP-FPM config file!

    The filename fog.conf you referenced in the topic name is only used for the Apache webserver config file that the FOG installer generates. This file should be in /etc/httpd/conf.d/fog.conf on CentOS 7 and on my test system it looks like this:

    <VirtualHost *:80>
        <FilesMatch "\.php$">
            SetHandler "proxy:fcgi://127.0.0.1:9000/"
        </FilesMatch>
        KeepAlive Off
        ServerName 192.168.2.7
        ServerAlias fogserver
        DocumentRoot /var/www/html/
        <Directory /var/www/html/fog/>
            DirectoryIndex index.php index.html index.htm
        </Directory>
        RewriteEngine On
        RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK)
        RewriteRule .* - [F]
        RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-f
        RewriteCond %{DOCUMENT_ROOT}/%{REQUEST_FILENAME} !-d
        RewriteRule ^/fog/(.*)$ /fog/api/index.php [QSA,L]
    </VirtualHost>
    

    Please check if you have that file in the right place and if not, create it according to what I posted above. The lines ServerName and ServerAlias need to be adjusted to match your IP and server name. Then restart Apache (systemctl restart httpd).



  • @george1421

    I check de version:

    [root@xxxxx ~]# php-fpm -v
    PHP 7.2.20 (fpm-fcgi) (built: Jul 2 2019 13:39:33)
    Copyright © 1997-2018 The PHP Group
    Zend Engine v3.2.0, Copyright © 1998-2018 Zend Technologies

    [root@xxxxxxxx ~]# php -v
    PHP 7.2.20 (cli) (built: Jul 2 2019 13:37:16) ( NTS )
    Copyright © 1997-2018 The PHP Group
    Zend Engine v3.2.0, Copyright © 1998-2018 Zend Technologies



  • @Tom-Elliott in permissive

    Outpud of sestatus:

    SELinux status: enabled
    SELinuxfs mount: /sys/fs/selinux
    SELinux root directory: /etc/selinux
    Loaded policy name: targeted
    Current mode: permissive
    Mode from config file: permissive
    Policy MLS status: enabled
    Policy deny_unknown status: allowed
    Max kernel policy version: 31


  • Senior Developer

    Is selinux in permissive or disabled?

    What’s output of sestatus


  • Moderator

    @Theangelo2 Also note that the version of php-fpm needs to match the version of php installed. I would need to double check but /etc/php-fpm.d just seems wrong.



  • I reinstall the fog proyect but i dont see www.conf on /etc/php-fpm.d/, I use find and nothing, error 503 in the web page.

    Log for Systemctl:

    – Unit php-fpm.service has begun starting up.
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar php-fpm[11188]: [19-Jul-2019 14:11:25] ERROR: [/etc/php-fpm.d/fog.conf:1] value is NULL for a ZEND_INI_PARSER_ENTRY
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar php-fpm[11188]: [19-Jul-2019 14:11:25] ERROR: Unable to include /etc/php-fpm.d/fog.conf from /etc/php-fpm.conf at line 1
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar php-fpm[11188]: [19-Jul-2019 14:11:25] ERROR: failed to load configuration file ‘/etc/php-fpm.conf’
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar php-fpm[11188]: [19-Jul-2019 14:11:25] ERROR: FPM initialization failed
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar systemd[1]: php-fpm.service: main process exited, code=exited, status=78/n/a
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar systemd[1]: Failed to start The PHP FastCGI Process Manager.
    – Subject: Unit php-fpm.service has failed
    – Defined-By: systemd
    – Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel

    – Unit php-fpm.service has failed.

    – The result is failed.
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar systemd[1]: Unit php-fpm.service entered failed state.
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar systemd[1]: php-fpm.service failed.
    jul 19 14:11:25 mtnlpxe371.transporte.gob.ar polkitd[717]: Unregistered Authentication Agent for unix-process:11182:189179 (system bus name :1.20, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale es_AR.UTF-8) (disconnected from bus)



  • I have the latest version of PHP 7.2.20
    I try Find but nothing.
    i try return to fog installer thx!


  • Moderator

    Try (do) rerun the fog installer. The file should not be blank. Also the location of that file changes based on what version of php you have installed. You can search the /etc directory with find /etc -name www.conf (just off the top of my head I think it was www.conf not fog.conf). That php-fpm root directory changes based on the version of php that is installed. If you still have php5.6 then you have the right path. php7.x it moves around.


Log in to reply
 

319
Online

6.1k
Users

13.5k
Topics

127.2k
Posts