Full C:\ After Imaging Inconsistent

[imagingmaster21]

@Quazz @Sebastian-Roth I actually ended up reading that post this morning. We do have two FOG servers on the same version. Our main one is stationed at our office which is the one I’ve been getting the info off of.

The other one is our mobile version (we like to call it that) simply installed on a laptop, it does have the same issue however it is on version 1.5.6.4, whereas our main one is on 1.5.6.5. I will run a debug task on our mobile one also while it is on 1.5.6.4 sometime this afternoon hopefully.

[imagingmaster21]

@Tom-Elliott @Sebastian-Roth @Quazz

I tried imaging a machine on our FOG Mobile server that has 1.5.6.4 that has the same hit or miss issue with incorrect partition/full C:. Here is the debug:

[Sebastian Roth]

@imagingmaster21 Yes @Quazz is right, really sounds like a similar issue to the one linked. Pretty sure the issue is being found and we’ll fix it in the next days. Will let you know here!

[Sebastian Roth]

@imagingmaster21 New inits are ready for testing. Download 64 Bit and 32 Bit and put those in /var/www/html/fog/service/ipxe/ dir on your FOG server. Probably good to rename the original ones instead of overwriting.

As well you need to check the RAM SIZE option in FOG configuration, FOg settings. Need to be 275000 with the newer inits.

[imagingmaster21]

@Sebastian-Roth @Tom-Elliott
Ok I did that and rebooted the FOG server and got this error message on a T440 and T490:

Would it be worth updating to 1.5.7?

[Sebastian Roth]

@imagingmaster21 My fault!! Sorry. Will fix that in the next two hours and let you know.

[Sebastian Roth]

@imagingmaster21 Alright, should be fixed now. Just re-download the inits from the same links as before and give it a try. Please let us know how things go.

[imagingmaster21]

@Sebastian-Roth
That error is fixed. We are imaging a large batch of computers now, I will let you know how the disk space is on them after we image and check them.

[imagingmaster21]

@Sebastian-Roth We have imaged 20 computers of different models without the issue. So far so good.

[Sebastian Roth]

@imagingmaster21 Thanks for the heads up. I will mark this solved now here. If you see any new issues feel free to call out.