Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP

[DarKFeeliN]

@george1421 said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

1. If you create a VM (or have one) on this same vm host server does it pick up a dhcp address in the x.y.42.X range?

It has a static IP in the x.y.42.X range, but yes, it could also be dynamically assigned by the DHCP for the x.y.42.X range.

2. Do you have the fog server bridged to the business network (not natted)?

It is bridged and has its own (public) address. I never had an issue with that on a bridged network, the webserver works flawlessly.

3. Do you need to set the vm host server interface into promiscuous mode?

I just checked: Yes, the main NIC goes into promiscuous mode according to /var/log/kern.log

4. If you take a second computer as a witness computer with wireshark installed connected to the same network switch as the FOG server’s vm host do you see any dhcp traffic?

As stated in my last response I sadly already did that and did not see a single package. I will also try a few different clients with different pxe-Versions but I think it might be safe to assume there is no broadcoasting allowed for those ports.

Just to make extra sure I will test this exact VM in an isolated network with a switch I control and know how the firewall and routes are setup and see, if the tcpdump then contains packages on those ports. If this is the case I will get in touch with the networking team (IT here is hierarchical to some degree, the network infrastructure is not in our own hands) and ask if they can make an exception for the broadcoasts of those ports to the specific IP of my fogserver. But I really have to state my request very specific so I want to make sure I do not ask for anything I do not need or have an error on my side of the configuration first.

Once we see dhcp traffic then we can focus on if dnsmasq is working like it should.

As soon as this is the case (or I make a new discovery) I will get back to you! Thank you for all your answers so far, they really lead me in the right direction.

[george1421]

@DarKFeeliN said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

It has a static IP in the x.y.42.X range, but yes, it could also be dynamically assigned by the DHCP for the x.y.42.X range.

Can you confirm that another VM on this same vm host as the FOG server does receive a dhcp address?
You could even just create a test vm that does a pxe boot i bios mode. that would tell us if it gets a dhcp address. Do this while running tcpdump on the FOG server. You “should” see the dhcp communication (hopefully).

[DarKFeeliN]

@george1421 I just spun up a Windows VM and changed it to get its IP-Address from DHCP and it worked. I should add that the MAC-Address has to be whitelisted first, if it is supposed to get a DHCP-Address but every MAC-Address that is involved with the fogserver is already whitelisted.

I will send the tcp-dump to you (you can see 5 Discover packets, a request-packet and a inform packet like you would expect).

[george1421]

@DarKFeeliN said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

I should add that the MAC-Address has to be whitelisted first

Are you running some kind of NAC/NAP in your environment? Or do you have a high security network (i.e. DoD)?

[DarKFeeliN]

@george1421 said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

Are you running some kind of NAC/NAP in your environment? Or do you have a high security network (i.e. DoD)?

I would not call it a high security network as the network is partly public (university) but the whitelisting is in place so no student can just plug in their devices. There also is filtering to the outside and the inside of the network but this is clearly communicated and does not (or maybe I should say “should not”) interfere within the “local” network.

[george1421]

@DarKFeeliN Well I think attempting to capture the dhcp process from a witness computer (i.e. laptop plugged into same switch as your vm host server) will tell us where to look next. That witness computer running wireshark should pick up both sides of the conversation. Remember the complete dhcp process is Discover->Offer->Request->ACK and then some time later Inform. If we see the Discover through ACK then it was successful.

[DarKFeeliN]

@george1421 said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

@DarKFeeliN Well I think attempting to capture the dhcp process from a witness computer (i.e. laptop plugged into same switch as your vm host server) will tell us where to look next. That witness computer running wireshark should pick up both sides of the conversation. Remember the complete dhcp process is Discover->Offer->Request->ACK and then some time later Inform. If we see the Discover through ACK then it was successful.

I already did that twice but just to make sure I ran it again for over an hour to witness every packet I can get regarding port 67 or port 68 or port 69 or port 4011.

I have only been able to see DHCP-Requests from the client that was running wireshark and ACK packets from two other PCs (in reality there were way more since there are around 200 PCs receiving IP-Addresses including some I let receive an IP-Address over DHCP that were not picked up at all).

[Sebastian Roth]

@DarKFeeliN Do you set Wireshark to capture in promiscious mode?

[DarKFeeliN]

@Sebastian-Roth said in Not able to PXE boot from FOGServer on Proxmox LXC with proxyDHCP:

@DarKFeeliN Do you set Wireshark to capture in promiscious mode?

I just double-checked and: Yes, I’m capturing in promiscous mode (as it is default in the Windows version).

[DarKFeeliN]

@george1421
New revelations have been made. As I said I now replicated the whole setup on a local isolated network (with exception of the apparmor modifications, not necessary on a bare-metal installation).

I have my witness-computer connected to both networks with 2 seperate NICs. Only one is active at a time. In both setups I first started wireshark on the witness computer and booted a notebook into pxe.

• Main network: No packets or barely some DHCP-ACKs (that were not from the booting laptop).
• Isolated local network: Discover -> Offer -> Request -> ACK. Laptop got an IP from the router and loaded the appropriate bootrom from the fogserver and booted from it.

Conclusion: Since the witnessing of the DHCP-packets have nothing to do with fog itself it is safe to say that there is some sort of broadcoastfiltering of the DHCP-relevant ports. The (almost) exact same installation worked in an isolated network but not on the main network.

Thank you so much, I finally know the exact cause of the problem and am able to proceed. I now have to write up a request if the networking team would be so kind to allow the broadcoasting of those port-packets to a single static IP that I own (I really hope they’ll allow that. Now that I think of it this makes total sense. If people are able to plug in their own devices into the network that behave like a DHCP-Server and then handle the IPs before the main DHCP does you are in a golden MITM-position and can intercept with the network-packets to your desire). But as far as fog goes, this is nothing from its side.

So I think I can say this is solved for the cause of “troubleshooting”. Even if my journey is not exactly at its end yet. Thanks again!