PXE boot menu order
-
Flash BIOS/firmware or change boot order?
I want to change boot order, but I understand it would be vendor specific. I brought it up, as I remember reading a thread where the BIOS was changing after deployment, and it was an undesired action for them, but in my situation, I’d want it to change. I’ll set that aside for now, though.
… fog.reginput and check Default Item there. …
Hey, this worked, thanks!
One other question along this line of discussion: I’ve noticed when I choose “Boot from hard disk” in the FOG PXE menu, it goes to a black background, white text, with items that look similar to the regular menu, and a countdown timer that keeps looping 3,2,1,3,2,1… without actually booting to the drive. I can get a picture later, but have you seen that / know what the issue is?
-
One other question along this line of discussion: I’ve noticed when I choose “Boot from hard disk” in the FOG PXE menu, it goes to a black background, white text, with items that look similar to the regular menu, and a countdown timer that keeps looping 3,2,1,3,2,1… without actually booting to the drive. I can get a picture later, but have you seen that / know what the issue is?
Bump.
-
@ckasdf Please send us a picture of that or even better a video!
-
@Sebastian-Roth I was able to capture it on video finally.
-
@ckasdf Please open the following URL in your browser and you should get some text code back. Please copy & paste all that text in the forums here.
http://172.17.207.144/fog/service/ipxe/boot.php?mac=50:7b:9d:43:e0:25
-
Hey Sebastian, thanks for the response. Some external vendors nuked our network over the weekend while performing some kind of maintenance in the data center,
so I’m without access to the FOG server until the pieces can be mended. I’ll get back to you with the info once I can.They worked through the night and the network is 98% functional! Here’s what you asked for:#!ipxe set fog-ip 172.17.207.144 set fog-webroot fog set boot-url http://${fog-ip}/${fog-webroot} cpuid --ext 29 && set arch x86_64 || set arch i386 goto get_console :console_set colour --rgb 0x00567a 1 || colour --rgb 0x00567a 2 || colour --rgb 0x00567a 4 || cpair --foreground 7 --background 2 2 || goto MENU :alt_console cpair --background 0 1 || cpair --background 1 2 || goto MENU :get_console console --picture http://172.17.207.144/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console :MENU menu colour --rgb 0x00567a 0 || cpair --foreground 1 1 || cpair --foreground 0 3 || cpair --foreground 4 4 || item --gap Host is registered as LNPC08CU55! item --gap -- ------------------------------------- item fog.local Boot from hard disk item fog.memtest Run Memtest86+ item fog.keyreg Update Product Key item fog.deployimage Deploy Image item fog.multijoin Join Multicast Session item fog.quickdel Quick Host Deletion item fog.sysinfo Client System Information (Compatibility) choose --default fog.reginput --timeout 3000 target && goto ${target} :fog.local sanboot --no-describe --drive 0x80 || goto MENU :fog.memtest kernel memdisk initrd=memtest.bin iso raw initrd memtest.bin boot || goto MENU :fog.keyreg login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param keyreg 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.deployimage login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param qihost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.multijoin login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param sessionJoin 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.quickdel login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param delhost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.sysinfo kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=http://172.17.207.144/fog/ consoleblank=0 rootfstype=ext4 storage=172.17.207.144:/images/ storageip=172.17.207.144 loglevel=4 mode=sysinfo imgfetch init_32.xz boot || goto MENU :bootme chain -ar http://172.17.207.144/fog/service/ipxe/boot.php##params || goto MENU autoboot -
Any thoughts based on the results of the page you asked for?
-
@ckasdf Ohhh no, I had lost track of this topic again. Sorry for the late reply!
Now that you posted the iPXE boot menu output I kind of understand what’s going on here. The boot exit type is set to “sanboot” and for some reason it seems like this machine you are trying this on is not able to use that exit type. You can change this setting either “per host” (host settings -> Host Bios Exit Type and Host EFI Exit Type) or globally (FOG Configuration -> FOG Settings -> FOG Boot Settings -> BOOT EXIT TYPE (for legacy BIOS machines) and EFI BOOT EXIT TYPE (for UEFI machines).
Probably start by changing this in the host settings to see what works for this kind of machine.
-
Thanks for the reply, and no worries about losing track. You’re doing great work, and I appreciate you supporting the community.
I’ll try out some different options and see if I can get one to work better, and let you know if I need any more help on this one.
I posted another question in which @fry_p mentioned your name to see if you’d have any thoughts there. If you have some time, maybe you can help determine what’s up there too.
-
@Sebastian-Roth It’s been a hot minute, but I finally had some time to test this today. I went through the entire list of Host Exit Types from SANBOOT through EXIT and none of them worked for the desktops. Different options reacted differently (one of them put it into a boot loop), but none of them allowed the computer to proceed to Windows upon allowing the PXE menu to auto-select “Boot from hard drive.”
Any other options or things I can try?
-
@ckasdf Maybe start by telling is more about the machine you see the problem with. Is this happening on just one single model? Please post the exact make and model here and possibly someone else hast the same around and can give us a hint.
As well, is this machine set to legacy BIOS, UEFI or CSM? Have you tried playing with those? If you still use legacy or CSM I highly recommend to move towards proper UEFI.
Beside that I can imagine that some machines firmware just doesn’t properly do the chainload from iPXE back to the disk with the methods we have in FOG right now. There is a chance that using custom methods (like GRUB2 native UEFI build or a modified refind.conf) will work. But for that we need to know exactly what settings you have (UEFI/legacy BIOS) and the errors you see with the different exit types.
-
Of course. The model I’ve primarily seen issues with is the Lenovo Thinkcentre M93p. It does seem to be somewhat inconsistent in terms of one working fine while several others experience the described issue. I just tried on a Thinkpad T450 and it worked just fine, though I had one that experienced the issue before.
I have developed UEFI-based Windows images, so I set the computers either to UEFI-only or UEFI-first. I have been preferring the latter in case there’s any weird things we might want to do with Legacy support, but I’m wondering if that may have some negative effect. Your broaching of this subject has me thinking, and I think the next batch of M93p’s I build, I’ll set them to UEFI-only to see if that has any different reaction.
This issue isn’t a terrible, terrible thing for my workflow, but it does disrupt it to a small degree. The issue could technically be fixed if I change the “Error” boot sequence to put the drive before the network. What happens is i switch away on the KVM, the computer detects that a keyboard isn’t connected, and it boots to the network. Long term, I like the idea of keeping this setting, as it will help with future automation plans.
-
@ckasdf said in PXE boot menu order:
t does seem to be somewhat inconsistent in terms of one working fine while several others experience the described issue.
To me this sounds like the machines have different UEFI firmware versions and/or firmware settings!
-
They do occasionally have different or old BIOS versions, which I update after Windows is finished loading. But they all have the same settings.