Partclone Upload Stalling

[jemerson93]

@Wayne-Workman said in Partclone Upload Stalling:

@Sebastian-Roth I don’t have access to their articles anymore - but when I did have access back at a previous job, I found if I google’d enough I could find the same stuff elsewhere.

Has a duplicate IP been looked for yet, for the fog server and for the VMs?

Hi Wayne,

I did verify there are no duplicate IP’s in use between the FOG server and VM’s nor are any in use on individual workstations on the LAN.

[Sebastian Roth]

@jemerson93 said in Partclone Upload Stalling:

It take much longer then usual (I think it took about 3 and a half hours opposed to the past 30 minutes) but no CPU stall or initial network stall.

I find it very strange that it it’s going slow with 4.15.2 as well. I will re-compile those kernels as well and see if it was missing the patch.

[Sebastian Roth]

@jemerson93 Please test the newly compiled 4.15.2 kernels you find here: https://fogproject.org/kernels/new/

Let us know if those help in speeding up the process and still don’t have the other rcu_sched stall issue.

[jemerson93]

@Sebastian-Roth said in Partclone Upload Stalling:

@jemerson93 Please test the newly compiled 4.15.2 kernels you find here: https://fogproject.org/kernels/new/

Let us know if those help in speeding up the process and still don’t have the other rcu_sched stall issue.

Hi Sebastian,

It may take me a couple of days to get a response back to you. As soon as I can, I’ll do another upload and update you.