New Fog Server - /images location

george1421

@Technolust Well confirm that the… let me remote into my office and see if the field is there. Lets not do a bunch until we know. We can make it work like you need it. Give me a few minutes to double check things.

george1421

@Technolust OK I just looked and there IS the field in question. Its called storagelocation. Go ahead and do a normal install, let it default to /images

george1421

@george1421 Just open thoughts on changing storage location.

Update .fogsettings storagelocation field.
Update /etc/exports to from /images and /images/dev to new locations /fogserver/images and /fogserver/images/dev
Copy everything from /images to /fogserver/images
cp -r -f /images/* /fogserver/images
Make sure directory permissions match between /images and /fogserver/images
In the web ui update Fog Settings->Fog Configuration Expand all settings and then search for /images and replace with proper path
Go to default storage node settings and update /images to /fogserver/images
Then back to the linux command prompt and rerun the fog installer script.
Double check /etc/exports to ensure that /fogserver/images is still shared.
Reboot the fog server
At the linux command prompt key in showmount -e 127.0.0.1. It should show /fogserver/images being exported after a reboot.

That should do it.

Technolust

@george1421 Ok George, so going ahead with the default install and then will try the settings below. Sound right?

Technolust

@george1421 Is it common to leave the mysql password blank?

Sebastian Roth

@Technolust said:

Is it common to leave the mysql password blank?

No you better set a proper mysql root password before installing FOG. We are working on the installer to pilot people to set passwords.

Technolust

@Sebastian-Roth That’s what I figured. Thank you!!!

Technolust

@george1421 Hey George, in step 5, the Web GUI -> Fog Configuration -> Fog Settings -> Expand all -> there is no /images location. Should there be any specific settings? In step 6 do I also change the FTP path to /fogserver/images from /images? If so I did that as well. Finally step 10 - Looks good.
Export list for 127.0.0.1:
/fogserver/images/dev *
/fogserver/images *

Can you tell me if this will need to be performed for every update or will fog server updates keep these settings?

Technolust

Should the Storage Node show online?

When I go to storage nodes it is up and running.

Thoughts?

Thanks,

Technolust

george1421

@Technolust said in New Fog Server - /images location:

Web GUI -> Fog Configuration -> Fog Settings -> Expand all -> there is no /images location

Sorry I wrote that post from memory since I didn’t have immediate access to a fog console to verify.

also change the FTP path to /fogserver/images from /images?

Right you need to change everywhere you would see /images to the new images path.

It looks good for the export list.

If you updated the .fogsettings file in step 1 then no, it should be automatic moving forward.

george1421

@Technolust What does the content of the default storage node look like?

Also did you reboot the fog server after you made all of those changes? Some values are only loaded at boot time.

Technolust

@george1421 Thanks, I did make the change for the ftp path and I did update the .fogsettings in step 1 as well as rebooted the server. Only thing now is the Storage Node not coming online.

/fogserver/images/

[root@fogserver images]# ls -lrt
total 12
drwxrwxrwx. 3 fog root 4096 Jan 22 09:21 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postdownloadscripts
drwxrwxrwx. 2 fog root 4096 Jan 22 10:03 T470-Win10

george1421

@Technolust I don’t have a clue about the storage node on the home screen. But from your ls command you are missing 2 check files. If you run ls -la on the old /images directory you will see a file called .mntcheck and the second one of the same name needs to be in /images/dev. Those will need to be recreated in your new location paths. You can simply do:
touch /fogserver/images/.mntcheck
and
touch /fogserver/dev/images/.mntcheck

its ok if they are already there, that touch command will just update the last time the file was access, or create it if it wasn’t there.

Technolust

@george1421 said in New Fog Server - /images location:

touch /fogserver/dev/images/.mntcheck

Ok looks like /fogserver/dev/images doesn’t exist. Is this supposed to be /fogserver/images/dev?
If so I ran touch touch /

[root@fogserver images]# ls -la /fogserver/images/
total 20
drwxrwxrwx. 5 fog root 4096 Jan 22 10:03 .
drwxr-xr-x. 3 root root 4096 Jan 22 09:16 …
-rwxrwxrwx. 1 fog root 0 Jan 22 10:25 .mntcheck
drwxrwxrwx. 2 fog root 4096 Jan 22 10:03 T470-Win10
drwxrwxrwx. 3 fog root 4096 Jan 22 09:21 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postdownloadscripts
[root@fogserver images]# ls -la /fogserver/dev/images/
ls: cannot access /fogserver/dev/images/: No such file or directory
[root@fogserver images]# ls -la /images/
total 16
drwxrwxrwx. 4 fog root 4096 Jan 22 09:10 .
dr-xr-xr-x. 22 root root 4096 Jan 22 09:36 …
-rwxrwxrwx. 1 fog root 0 Jan 22 09:10 .mntcheck
drwxrwxrwx. 3 fog root 4096 Jan 22 09:10 dev
drwxrwxrwx. 2 fog root 4096 Jan 22 09:10 postdownloadscripts
[root@fogserver images]#

[root@fogserver images]# touch /fogserver/images/dev/
[root@fogserver images]# ls -la /fogserver/images/dev/
total 12
drwxrwxrwx. 3 fog root 4096 Jan 22 10:28 .
drwxrwxrwx. 5 fog root 4096 Jan 22 10:03 …
-rwxrwxrwx. 1 fog root 0 Jan 22 09:21 .mntcheck
drwxrwxrwx. 2 fog root 4096 Jan 22 09:21 postinitscripts
[root@fogserver images]#

george1421

@Technolust said in New Fog Server - /images location:

touch /fogserver/dev/images/.mntcheck

Ok looks like /fogserver/dev/images doesn’t exist. Is this supposed to be /fogserver/images/dev?

OK its time for either another cup of coffee or for me to just go back to bed. The path /fogserver/dev/images is of course wrong. I should have typed /fogserver/images/dev

It looks like you have the check file in the proper paths from your ls command. But after a reboot your storage node is still showing off-line?

Technolust

@george1421 No worries at all I figured that’s what you meant. My coffee needs coffee today! Just did another reboot. Node is still offline.

george1421

@Technolust Does the IP address in the default storage node configuration point to the right IP address?

I would do a test capture to ensure the image capture process completes correctly. If it does then do a deploy back to the same computer. If both work then we’ll bring the devs in to see if there is something “under the hood” wrong.

Technolust

@george1421 Ok cool let me get that up and see. Will report after.

Technolust

@george1421 Here is something strange, I RSYNC’d two images from the old Fog server to this new one and when I open the images link and select all images. No images show up. It’s appears to be acting like the Web GUI can’t see the /fogserver/images directory.

Technolust

@george1421 Ok George, looks like I need another cup of coffee… I figured out why the Storage was not online. Two issues.

Selinux - Looks like I ran the script earlier without putting Selinux in Permissive mode so yeah it was breaking things. Found out when I tried to actually pull an image.
Permissions - Permissions for /fogserver dircetory needed to change ownership (was root:root needs to be fog:root) Recursively along with 777 so the /fogserver/images directory had the correct permissions but not the /fogserver dircetory.

Looks like things are good. I am Rsyncing the images back over from the old fog server and will try it again when they come over.

New Fog Server - /images location

150

11.7k

17.2k

154.7k