Intermittent Connection time out error.
-
@steharv Its the same error, however its intermittent and does not happen everytime, sometimes it boots straight up to the FOG menu.
-
iPXE is before kernels even come into the picture. This means the issue is somewhere between the NIC and iPXE attempting to get information.
As far as I can tell, the information it’s looking at to get its boot information (the 192.168.1.1/default.ipxe part) is inaccessible.
So you’re sure your FOG Server’s IP address is sitting at 192.168.1.1? Is there potential that something else is also handing out boot file information?
-
@Tom-Elliott Hi Tom, Thanks for the reply back. My router IP address ranges is from 192.168.100 to 192.168.1.250 -
I have set Ubuntu to fixed IP address of 192.168.1.249 which is set up as the FOG IP address, DNS and DHCP server is set to 192.168.1.1
-
@steharv Then I would highly recommend you update the IP address in
/opt/fog/.fogsettingsto match that of your FOG IP Address.Right now it’s looking at your router for the file, and it should be looking at your FOG Server for the default.ipxe file.
-
Attached is my default ISP router, just wondered if anything here is interferring?
-
@steharv Once you update the IP Address in the fogsettings file, rerun the installer. I’m also going to guess that you may need to update your storage node information.
On a secondary note, is your FOG Server providing DHCP as well as your main Router?
-
@Tom-Elliott Router is just set to default DHCP setting which is on and when installing FOG I answered yes to use FOG as DHCP server. No storage nodes, I can just reinstall FOG as can go back to a preinstall snapshot on VB.
-
@Tom-Elliott Hi Tom, I reinstalled FOG from scratch, I set the FOG server IP to 192.168.1.248 and then DHCP and DNS server the same IP but it still tries to look for 192.168.1.1 when it boots?
-
@steharv Then the problem is you have two DHCP servers on your network. This is why you’re getting access to FOG iPXE menu intermittently. Both DHCP servers are on the same network, and BOTH are issuing IP’s in the same subnet. If FOG hands out faster than the router, you’ll be able to get to FOG iPXE Menu, if not you’ll get an error.
I’d highly recommend looking into manually updating the information.
-
@steharv In your Router you should have a method to set options for Boot IP and Boot file. It’s here I would recommend updating things. In MS DHCP the options are 66/67 (66 being the FOG Server’s IP/67 being the bootfile - ipxe.pxe, undionly.kpxe, etc…)
-
@Tom-Elliott So editing the fogsettings file and rerun the installer? Can I edit the file via FTP?
-
@Tom-Elliott I cannot see any settings in my router for that?
-
-
@Tom-Elliott Would I be better off just installing DNSMasq?
-
@steharv said in Intermittent Connection time out error.:
Would I be better off just installing DNSMasq?
You probably would. Follow George’s post here (full config file) and check your dnsmasq version: https://forums.fogproject.org/topic/12133/fog-on-existing-dhcp-server/3
-
@Sebastian-Roth Thank you
-
@Sebastian-Roth I have tried restart dnsmasq but get the following error" Job for dnsmasq. service failed because the control process exited with errror code. See "systemctl status dnsmasq.service and “journalctl - xe” for details.
-
@steharv said in Intermittent Connection time out error.:
journalctl - xe
Then run that command and post output here. As well post your full config here.
-
@Sebastian-Roth said in Intermittent Connection time out error.:
nit dnsmasq.service has begun starting up.Nov 14 12:45:23 ste-VirtualBox dnsmasq[2453]: dnsmasq: syntax check OK.
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: dnsmasq: failed to create listenin
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: failed to create listening socket
Nov 14 12:45:23 ste-VirtualBox dnsmasq[2454]: FAILED to start up
Nov 14 12:45:23 ste-VirtualBox systemd[1]: dnsmasq.service: Control process exit
Nov 14 12:45:23 ste-VirtualBox systemd[1]: dnsmasq.service: Failed with result ’
Nov 14 12:45:23 ste-VirtualBox systemd[1]: Failed to start dnsmasq - A lightweig
– Subject: Unit dnsmasq.service has failed
– Defined-By: systemd
– Support: http://www.ubuntu.com/support– Unit dnsmasq.service has failed.
– The result is RESULT.
Nov 14 12:45:23 ste-VirtualBox sudo[2447]: pam_unix(sudo:session): session close
Nov 14 12:49:44 ste-VirtualBox sudo[2828]: ste : TTY=pts/0 ; PWD=/home/ste
Nov 14 12:49:44 ste-VirtualBox sudo[2828]: pam_unix(sudo:session): session opene
lines 2203-2225/2225 (END)e -
dhcp-vendorclass=UEFI64,PXEClient:Arch:00009 Set the boot file name based on the matching tag from the vendor class (above) dhcp-boot=net:UEFI32,i386-efi/ipxe.efi,,<fog_server_IP> dhcp-boot=net:UEFI,ipxe.efi,,<fog_server_IP> dhcp-boot=net:UEFI64,ipxe.efi,,<fog_server_IP> PXE menu. The first part is the text displayed to the user. The second is the timeout, in seconds. pxe-prompt="Booting FOG Client", 1 The known types are x86PC, PC98, IA64_EFI, Alpha, Arc_x86, Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI This option is first and will be the default if there is no input from the user. pxe-service=X86PC, "Boot to FOG", undionly.kpxe pxe-service=X86-64_EFI, "Boot to FOG UEFI", ipxe.efi pxe-service=BC_EFI, "Boot to FOG UEFI PXE-BC", ipxe.efi dhcp-range=192.168.1.248,proxyMod Note: Fixed file formatting -Geo
