Fog PXE Boot issues in VMware
-
@mmoore5553 PXE booting from a cold boot worked more often than not. But I agree its pretty annoying.
I have not tried this but if you make a uefi iso image you may be able to boot into ipxe pretty reliably. As I posted before you will need ipxe.efi from the fog server and then just manually create the uefi disk structure and rename the ipxe.efi to boot64.efi (you will need to confirm the actual uefi boot file name) then create your iso image. Configure your vm to boot from the uefi disk and it should launch ipxe and the fog menu. That will bypass the entire pxe part of the process.
-
@george1421 i am lazy. I can paypal you some money if you make the iso for me LOL . Just let me know how much.
-
@mmoore5553 I’m basically lazy on the weekends too. https://forums.fogproject.org/topic/6350/usb-boot-uefi-client-into-fog-menu-easy-way
https://mindthebandgap.wordpress.com/2013/03/13/how-to-convert-bootable-usb-into-an-iso-file/
Basic concepts. -
@george1421 i made a usb boot disk but run into errors there too. This is a pain. I do not know how i am going to get my golden image updated. Here is the error i get
if i just boot the usb drive and computer. I get connected and IP address but then it says it can not find an image when i select it. UGH .
-
@mmoore5553 OK so iPXE is running. The error message says that its not getting an IP address on the interface identified by the mac address.
So, I have to ask the question(s)
- For this VM, is it connected by a bridged interface to the physical network adapter?
- For the network where this VM is connected; what device is your dhcp server?
- Is your FOG server on the same subnet as this VM?
- What do you have configured for dhcp option 66 and 67?
My intuition is telling me you have an infrastructure issue, not necessarily a fog issue. You say that physical computers pxe boot without issue. I’m almost thinking its on the vm networking side.
If the fog server is on the same vlan as the pxe booting VM we might be able to use the fog server to find out what is being sent by the client computer.
-
@george1421 my setup is simple. I have a computer that is connected to netgear switch. It is an unmanaged switch. It then connects to the fog server . That is the only computers on this switch. We do not have it on a network at all but this isolated network. I have never ran into this issue. Before i brought it here it was pushing out images all day when you pulled the image- booting a computer up and then pulling the image from the fog server. One thing I did notice on the fog server that it is not putting a gateway in IPconfig. Not sure why. I am going to pull out my old laptop fog server . Do i need to get the special file off of it ? or are those files the same from server to server. That fog server is 1.0.5
-
@mmoore5553 So you have just a simple network setup, only a vm host server, a network switch and a fog server. What is your dhcp server for this network? Do you have the fog server issuing dhcp addresses to the target computers?
-
@george1421 yes the fog server should be handling dns and dhcp. The computer gets an ip address each time and dns. I have a spare fog server i am booting up now but it had the same issues before .
-
@mmoore5553 Understand I’m still trying to get the picture of what is not working here; so physical machines get their IP address no problem when plugged into the unmanaged switch. The only issue is with the virtual machine running under vmware workstation?
-
@mmoore5553 As mentioned several times, bridged network mode in VMware will be the only proper option for you here. Possibly best if you take a picture of the settings dialog and post here.
-
@george1421 @Sebastian-Roth yes the only issues is vm workstation and it is in bridge mode. I just got it to work once so far. It is uploading the image and nothing changed at all. Just on that restart I did it just via network IP 4. I booted to firmware and then picked network card.
This drives me nuts .
-
i have finally figured out how to get vm workstation working with no problems. My computer is plugged into real network at the time. I have to plug into the isolated network. When it pulls an IP address I then go and disable the adapter and enable it again. it then gets the ip address again. I then run ipconfig /flushdns.
After i do that and only then will i start VM workstation. i will go to the vm and go back to my snapshot. before i open it i always make sure the settings are showing bridged. I then power on the vm to the saved stated and run a ipconfig to make sure the computer and vm have actual same IPs in the subnet. Then run a flushdns on the vm. Then i sysprep and then boot to firmware on the vm. Then i pick network boot.
This has worked 7 times with no issues. I am sure i could cut out some steps but it is real easy for me to do all of it real quick. I only check to make sure it is bridged mode once.
Once i started to do this vm workstation work everytime and even on VM reboots.
I hope this helps someone else out.
Oh and i disable wireless first if you are using that.
