Fog Server not working on a Cisco 24-Port Managed Switch
dseecharran22 last edited by
I have a FOG Server set up on a isolated network and have it set up to image computers connected to a 24 port managed Cisco Switch. However when I PXE boot the machines, they pull a IP from the DHCP and I go through to deploy the image and then it says Starting eth0 interface udhcpc sending discover, udhcpc sending discover, udhcpc sending discover, and then fails. I figure this is because it is having trouble connecting to the server through the switch because it work fine when I use it with a regular 5-port Linksys Switch. Any advice on how to get the machines to image through the Cisco Switch?
Titione last edited by
I went through exactly this problem on my network, I use a Cisco Catalyst 2960 X, which solved it was to configure spanning-tree on all ports, and configure portfast on all but the trunk port (since we use more than one DHCP here). Good Luck!
Wayne Workman last edited by Wayne Workman
@dseecharran22 This has been a common problem for years for those with managed switches.
Here is a related thread: https://forums.fogproject.org/topic/12393/dhcp-lease-failing/9?page=2
Try to turn off fast-spanning-tree.