Update failed do to wget



  • Hey guys,

    I am attempting to update to 1.5.4 from 1.5.2 and I am unable to do so. The installer attempts to install a new wget which fails causing the whole update to fail at Installing now everything is updated. Below is the log.

    
    
       +------------------------------------------+
       |     ..#######:.    ..,#,..     .::##::.  |
       |.:######          .:;####:......;#;..     |
       |...##...        ...##;,;##::::.##...      |
       |   ,#          ...##.....##:::##     ..:: |
       |   ##    .::###,,##.   . ##.::#.:######::.|
       |...##:::###::....#. ..  .#...#. #...#:::. |
       |..:####:..    ..##......##::##  ..  #     |
       |    #  .      ...##:,;##;:::#: ... ##..   |
       |   .#  .       .:;####;::::.##:::;#:..    |
       |    #                     ..:;###..       |
       |                                          |
       +------------------------------------------+
       |      Free Computer Imaging Solution      |
       +------------------------------------------+
       |  Credits: http://fogproject.org/Credits  |
       |       http://fogproject.org/Credits      |
       |       Released under GPL Version 3       |
       +------------------------------------------+
    
    
       Version: 1.5.4 Installer/Updater
    
    
     * Found FOG Settings from previous install at: /opt/fog/.fogsettings
    
     * Performing upgrade using these settings
    
    
      Starting Debian based Installation
    
    
    
       ######################################################################
       #     FOG now has everything it needs for this setup, but please     #
       #   understand that this script will overwrite any setting you may   #
       #   have setup for services like DHCP, apache, pxe, tftp, and NFS.   #
       ######################################################################
       # It is not recommended that you install this on a production system #
       #        as this script modifies many of your system settings.       #
       ######################################################################
       #             This script should be run by the root user.            #
       #      It will prepend the running with sudo if root is not set      #
       ######################################################################
       #           ** Notice ** FOG is difficult to setup securely          #
       #        SELinux and IPTables are usually asked to be disabled       #
       #           There have been strides in adding capabilities           #
       #          The recommendations would now be more appropriate         #
       #    to set SELinux to permissive and to disable firewall for now.   #
       #  You can find some methods to enable SELinux and maintain firewall #
       #   settings and ports. If you feel comfortable doing so please do   #
       ######################################################################
       #            Please see our wiki for more information at:            #
       ######################################################################
       #             https://wiki.fogproject.org/wiki/index.php             #
       ######################################################################
    
     * Here are the settings FOG will use:
     * Base Linux: Debian
     * Detected Linux Distribution: Ubuntu
     * Server IP Address: XXXXXXXXXXXXXX
     * Server Subnet Mask :XXXXXXXXXXXXX
     * Interface: ens192
     * Installation Type: Normal Server
     * Internationalization: 0
     * Image Storage Location: /images
     * Using FOG DHCP: No
     * DHCP will NOT be setup but you must setup your
     | current DHCP server to use FOG for PXE services.
    
     * On a Linux DHCP server you must set: next-server and filename
    
     * On a Windows DHCP server you must set options 066 and 067
    
     * Option 066/next-server is the IP of the FOG Server: (e.g. xxxxxxxxxxxxxx)
     * Option 067/filename is the bootfile: (e.g. undionly.kpxe)
    
    
     * Are you sure you wish to continue (Y/N) Y
    
     * Installation Started
    
     * Installing required packages, if this fails
     | make sure you have an active internet connection.
    
     * Adding needed repository....................................OK
     * Preparing Package Manager...................................OK
     * Packages to be installed:
    
            apache2 bc build-essential cpp curl g++ gawk gcc gzip htmldoc lftp libapache2-mod-php7.1 libc6 libcurl3 m4 mysql-client mysql-server net-tools nfs-kernel-server openssh-server php7.1 php7.1-bcmath php7.1-cli php7.1-curl php7.1-fpm php7.1-gd php7.1-json php7.1-ldap php7.1-mbstring php7.1-mcrypt php7.1-mysql php-gettext sysv-rc-conf tar tftpd-hpa tftp-hpa unzip vsftpd wget xinetd zlib1g
    
    
     * Skipping package:   apache2.................................(Already Installed)
     * Skipping package:   bc......................................(Already Installed)
     * Skipping package:   build-essential.........................(Already Installed)
     * Skipping package:   cpp.....................................(Already Installed)
     * Skipping package:   curl....................................(Already Installed)
     * Skipping package:   g++.....................................(Already Installed)
     * Skipping package:   gawk....................................(Already Installed)
     * Skipping package:   gcc.....................................(Already Installed)
     * Skipping package:   gzip....................................(Already Installed)
     * Skipping package:   htmldoc.................................(Already Installed)
     * Skipping package:   lftp....................................(Already Installed)
     * Skipping package:   libapache2-mod-php7.1...................(Already Installed)
     * Skipping package:   libc6...................................(Already Installed)
     * Skipping package:   libcurl3................................(Already Installed)
     * Skipping package:   m4......................................(Already Installed)
     * Skipping package:   mysql-client............................(Already Installed)
     * Skipping package:   mysql-server............................(Already Installed)
     * Skipping package:   net-tools...............................(Already Installed)
     * Skipping package:   nfs-kernel-server.......................(Already Installed)
     * Skipping package:   openssh-server..........................(Already Installed)
     * Skipping package:   php7.1..................................(Already Installed)
     * Skipping package:   php7.1-bcmath...........................(Already Installed)
     * Skipping package:   php7.1-cli..............................(Already Installed)
     * Skipping package:   php7.1-curl.............................(Already Installed)
     * Skipping package:   php7.1-fpm..............................(Already Installed)
     * Skipping package:   php7.1-gd...............................(Already Installed)
     * Skipping package:   php7.1-json.............................(Already Installed)
     * Skipping package:   php7.1-ldap.............................(Already Installed)
     * Skipping package:   php7.1-mbstring.........................(Already Installed)
     * Skipping package:   php7.1-mcrypt...........................(Already Installed)
     * Skipping package:   php7.1-mysql............................(Already Installed)
     * Skipping package:   php-gettext.............................(Already Installed)
     * Skipping package:   sysv-rc-conf............................(Already Installed)
     * Skipping package:   tar.....................................(Already Installed)
     * Skipping package:   tftpd-hpa...............................(Already Installed)
     * Skipping package:   tftp-hpa................................(Already Installed)
     * Skipping package:   unzip...................................(Already Installed)
     * Skipping package:   vsftpd..................................(Already Installed)
     * Installing package: wget....................................Failed! (Will try later)
     * Skipping package:   xinetd..................................(Already Installed)
     * Skipping package:   zlib1g..................................(Already Installed)
     * Updating packages as needed.................................OK
     * Installing now everything is updated........................Failed!
    


  • I had to go in and manually delete each unused version. After that if fixed my issue. I was able to successfully update fog.

    Thanks for your help.


  • Senior Developer



  • 
    Filesystem                     Size  Used Avail Use% Mounted on
    /dev/mapper/FOG--IP1--vg-root  835G  205G  595G  26% /
    

    /boot is showing 100% when I do a regular df. I don’t think I’ve ever maxed out boot before but I’m not 100% sure.


  • Senior Developer

    What’s output of df -h /



  • apt-get update

    Hit:1 http://us.archive.ubuntu.com/ubuntu xenial InRelease
    Get:2 http://security.ubuntu.com/ubuntu xenial-security InRelease [107 kB]
    Get:3 http://us.archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB]
    Hit:4 http://ppa.launchpad.net/ondrej/apache2/ubuntu xenial InRelease
    Get:5 http://us.archive.ubuntu.com/ubuntu xenial-backports InRelease [107 kB]
    Hit:6 http://ppa.launchpad.net/ondrej/php/ubuntu xenial InRelease
    Get:7 http://us.archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [793 kB]
    Get:8 http://us.archive.ubuntu.com/ubuntu xenial-updates/main i386 Packages [725 kB]
    Fetched 1,841 kB in 0s (1,939 kB/s)
    Reading package lists... Done
    

    apt-get update -f (Got an error code 1 with apt-get update)

    Unpacking grub-pc-bin (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
    Preparing to unpack .../grub2-common_2.02~beta2-36ubuntu3.18_amd64.deb ...
    Unpacking grub2-common (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
    Preparing to unpack .../grub-common_2.02~beta2-36ubuntu3.18_amd64.deb ...
    Unpacking grub-common (2.02~beta2-36ubuntu3.18) over (2.02~beta2-36ubuntu3.17) ...
    Preparing to unpack .../gpgv_1.4.20-1ubuntu3.2_amd64.deb ...
    Unpacking gpgv (1.4.20-1ubuntu3.2) over (1.4.20-1ubuntu3.1) ...
    Processing triggers for man-db (2.7.5-1) ...
    Processing triggers for install-info (6.1.0.dfsg.1-5) ...
    Processing triggers for systemd (229-4ubuntu21.2) ...
    Processing triggers for ureadahead (0.100.0-19) ...
    Errors were encountered while processing:
     /var/cache/apt/archives/linux-image-4.4.0-128-generic_4.4.0-128.154_amd64.deb
     /var/cache/apt/archives/linux-image-4.4.0-124-generic_4.4.0-124.148_amd64.deb
    E: Sub-process /usr/bin/dpkg returned an error code (1)
    

  • Developer

    @BREIT Please run apt-get update ; apt-get upgrade and post what you see on screen. Probably there is an issue with updating some system packages…


Log in to reply
 

360
Online

6.0k
Users

13.3k
Topics

125.2k
Posts