UNSOLVED capturing image issue
I’ve seen some posts talking about similar issues to mine but none of them helped me, so I’m asking here.
When I try to capture an image, this happen :
I tried to upload a Windows 10 and 7 image, and tried with fresh install on Fog 1.5.0 and 1.4.4 : same issue.
When I do a ls - la on /images I got this :
but when I try to mannually mount /images/dev on /images I got this :
I did a lot of things that I saw on other posts without success (like modifying nfs parameters, etc…).
I’m running on Proxmox VE 5.1, and the Vm for the fog service is a debian 8.0. All my network is on 192.168.12.XXX.
Thanks in advance for your help.
I couldn’t find a solution to unlock my situation, I tried many things on promox and on fog, without succes again. So I decided to start a new install on another post, separated from the proxmox and it’s working fine. I think I’ll keep this solution so, thanks for your help and sorry to leave an unsolved issue, see you later !
@sebastian-roth Thanks again for your help, I’ll try this when I’ll go back to work. I’ll keep you informed about it.
@Charlie Maybe this would help? https://forum.proxmox.com/threads/is-it-possible-to-run-a-nfs-server-within-a-lxc.24403/
@sebastian-roth I’m using LXC containers.
@Charlie What kind of VMs/containers do you use on your Proxmox server?
@sebastian-roth I also did edit the file /etc/apparmor.d/lxc/lxc-default-cgns as shown in your link.
@sebastian-roth Hello and thanks for your answer. I followed your instructions so I got :
but then I got this :
Do I need to download or update something for this command to be recognized ?
Thanks in advance.
I’m running on Proxmox VE 5.1, and the Vm for the fog service is a debian 8.0.
Not starting NFS kernel daemon: no support in current kernel. ... (warning).
I’ve had that too back when using FOG in a Proxmox container. First you need to check if the nfsd module is installed and loaded in your Proxmox host system (not the VM but the underlaying system!):
# modprobe nfsd # lsmod | grep nfsd nfsd 312315 14 # grep nfsd /proc/filesystems nodev nfsd
Then you need to sort of activate that module for the VM as well:
# vzctl stop $CONTAINER_ID # vzctl set $CONTAINER_ID --feature nfsd:on --save # vzctl start $CONTAINER_ID
Now when the VM is back up you should see a proper output running
showmount -e 127.0.0.1…
For those take a look at the forum post here: https://forums.fogproject.org/topic/7978/fog-in-lxc-container-how-to-configure-nfs-server
@george1421 Thanks again, I tried this
and I got this
but I’ve still the “Programm not registred” when I do the showmount.
So, i tried to start the nfs service :
Should I update something or did I missed something when I installed ? Sorry again I’m not familiar with linux.
@charlie Yes, this tells us that the nfs service is not running on your fog server, or you did not disable the native linux firewall.
Thanks for your answer, it gave me this message :
does it have a relation with the nfs service ? Sorry i’m a beginner with Linux.
@charlie Can you post the output of this command:
showmount -e 127.0.0.1?