Windows Image Hangs on Boot
-
@george1421 I found the autologin I think.
-
@flipwalker Sorry working on a work project after hours.
Yes the firstlogon section is for activities you need to do that requires a command shell.
The setupcomplete.cmd file we do stuff like create admin user accounts (I know you can do that in the unattend.xml but we don’t) also we start the fog client in the setupcomplete.cmd so that the fog client doesn’t kick in too soon and botch OOBE (review the requirements for the FOG client in the wiki).
Connecting to a WAP and setting the preferred settings are easily done by GPO and is the preferred method.
Another point, don’t connect the reference image to AD before you sysprep it. If you need to execute things that need AD, do that in the setupcomplete.cmd or the first run.
-
@george1421 So hypothetically speaking, if the reference image got joined to a domain by FOG(bad FOG, you should read my mind and only do that when I want you to), do I need to scrap it and start over?
I did find the WAP GPO, so that should be good to go now. The only thing I have in setupcomplete right now is the FOG restart.
-
@flipwalker said in Windows Image Hangs on Boot:
So hypothetically speaking, if the reference image got joined to a domain by FOG(bad FOG, you should read my mind and only do that when I want you to), do I need to scrap it and start over?
Sorry to tell you this, but yes you must scrap that image. Because connecting your reference image to AD before sysprep will tattoo that machine in AD. Plus you may have GPO policies (that would be applied) that may interact with your system during OOBE. So its better off not to connect the reference image to AD then unconnect it before sysprep. It never ends well.
Now when you install the FOG client in the reference image, you need to set the service to disabled before your computer is rebooted (for any reason). This will keep the service from running and doing not so helpful things to your reference image. And you are right for the setupcomplete.cmd, use the sc command in there to set the FOG service to auto, and start it if you need. Here is a wiki article on the fog client with sysprep: https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_with_Sysprep
-
@flipwalker Are you using sysprep generalized and shutdown when you capture?
-
@george1421 Well I’ll be a son of a… Oh well. Ok. I went ahead and tried it anyway. Most of it seems to be ok, however my stepupcomplete.cmd doesn’t seem to want to run on its own. Is this because of the AD problem on the reference image? Or did I screw something else up? It worked previously on another test I did.
-
@imagingmaster21 That’s what I’m working on now. Previously I wasn’t syspreping because I was scared of unattend. But others have convinced me I need to stop being a wuss and try to learn myself real good. I’m almost there. In fact as we speak I just sysprepped a reference image machine and I’m about to capture and test deploy it.
-
@george1421 SetupComplete still isn’t executing. I can manually execute and it seems to work, but it doesn’t automatically. Any ideas?
-
@flipwalker What version of windows?
(Not just 10, but education, pro, etc…?)
-
@tom-elliott Pro, I’ll have to wait until tomorrow to tell you the version number, I don’t have a machine at home tonight.
-
@flipwalker As long as its not Win10 OEM then setupcomplete.cmd should execute as long as if its in the right location and you sysprep’d the image.
-
@george1421 It was an ISO for Pro that I pulled off the Microsoft site. The SetupComplete is at this exact path:
c:\Windows\Setup\Scripts\SetupComplete.cmd
Contents of it is:
sc config FOGService start= auto
netsh wlan add profile filename=“c:\Image\Wi-Fi-RTI-25B.xml”
shutdown -t 0 -rDo you see anything obvious?
-
If you’re referring to the retail version of Windows 10 that’s created by using the Microsoft Windows 10 Installation Media Creation Tool, it’s not quite the same as the GVLK (Generic Volume License Key) version, but I don’t think there would be anything that would prevent the running of the setupcomplete.cmd.
-
Just a status report for those interested. I did get a functional image going, and it seems to have resolved the issues. However I was never able to get the Setupcomplete to run, however I added a first logon addition to the unattend calling that script specifically and now it works.
Next on my to do list is getting a driver package put together for the laptops so they have the most up to date drivers installed on boot.
Thanks for all your help, and we can probably mark this as ‘solved’, but I don’t know how to do that…
-
@flipwalker If you have dell systems (sorry I don’t remember) you can get the cab files from here: http://en.community.dell.com/techcenter/enterprise-client/w/wiki/2065.dell-command-deploy-driver-packs-for-enterprise-client-os-deployment (Hint: They are all in one place.) Just extract the drivers using 7zip and build the required directory structure.
