After capture, Windows is corrupt.

  • Hey,

    Not sure where to go next. I have wasted a lot of time trying to change settings and no luck.
    I put together a newer PC, MSI z370-A Pro motherboard with an i3 8100 and SATA SSD. I installed Windows 7 Pro 64 and trying to capture the image, like I always do, but once it finished, something breaks and Windows won’t boot. I get a blinking white line.
    I’ve tried to deploy the image to the machine but same thing.

    Are there logs or anything I can check to see what’s going on?

  • @tom-elliott I am actually thinking it might have been a BIOs setting. It was on RAID mode so I reinstalled Windows and just captured it and it appears to have booted back into my Windows this time.

    I’ll finish up this install and try again and let you know.

  • Senior Developer

    I’ve moved the post to the fog problems.

    This really sounds like a potentially issue people found earlier, though we need a copy of the images d1.partitions, d1.minimum.partitions, and d1.fixed_size_partitions files to be certain.

  • Might have posted in the wrong section. Could a mod move if needed?

  • 1.4.4 R6077

  • Senior Developer

    What version of fog are you using?






Looks like your connection to FOG Project was lost, please wait while we try to reconnect.