After capture, Windows is corrupt.
-
Hey,
Not sure where to go next. I have wasted a lot of time trying to change settings and no luck.
I put together a newer PC, MSI z370-A Pro motherboard with an i3 8100 and SATA SSD. I installed Windows 7 Pro 64 and trying to capture the image, like I always do, but once it finished, something breaks and Windows won’t boot. I get a blinking white line.
I’ve tried to deploy the image to the machine but same thing.Are there logs or anything I can check to see what’s going on?
-
What version of fog are you using?
-
1.4.4 R6077
-
Might have posted in the wrong section. Could a mod move if needed?
Thanks. -
I’ve moved the post to the fog problems.
This really sounds like a potentially issue people found earlier, though we need a copy of the images d1.partitions, d1.minimum.partitions, and d1.fixed_size_partitions files to be certain.
-
@tom-elliott I am actually thinking it might have been a BIOs setting. It was on RAID mode so I reinstalled Windows and just captured it and it appears to have booted back into my Windows this time.
I’ll finish up this install and try again and let you know.
Thanks!
