Solved Deploy image only in the SSD hd

[fog.user]

I Used
FOG 1.4.4

OS
xubuntu (64bit)

Hello,
i have 30 new PC with two hd, one classic hd and one SSD hd.
i have an image to deploy for these pc,and when start the deploying FOG restore the image in the two hardisk and the pc start with the OS installed in a classic HD.
It’s possible to deploy image ONLY in SSD hd?
The settings in “Image management” they are correct on snapshot, for restore image only in SSD hd?
Thank you.

[fog.user]

@george1421 said in Deploy image only in the SSD hd:

@fog-user The developers have done a great job thinking about all of the different hardware combinations out there and built in a lot of useful “tweaks” that can be done.
I’m glad you were able to get your imaging going like you need. Is it OK to solve this thread?

yes @george1421 is it ok.
thank you

[george1421]

@fog-user The developers have done a great job thinking about all of the different hardware combinations out there and built in a lot of useful “tweaks” that can be done.

I’m glad you were able to get your imaging going like you need. Is it OK to solve this thread?

[fog.user]

@george1421
Great it’s works!!!
Thank you @george1421 for the fast reply and thanks to all the people who contribute to the development of fog.
FOG is an excellent program opesource, excellent result!!

[fog.user]

This post is deleted!

[george1421]

The short answer is yes you can deploy / image to a specific hard drive. The answer you seek is in the host configuration page not the image configuration page. You want to edit the “Host Primary Disk” field. If the ssd is the second disk then you want to add in /dev/sdb as the host primary disk, then it will not touch the first hard drive which is by default /dev/sda