No FOG menu on PXE boot

[Chrispy]

I just setup FOG on Ubuntu both are current versions. Configured options 66 and 67 in DHCP. When my test Windows PC boots to PXE I get a message then it boots into Windows. I’m not sure what else I need to do to get the FOG menu to come up. I tried starting a capture task on the web console, just to see if I could get anything FOG related to come up, but it does that same thing. I added the PC manually. BIOS is set to legacy boot. Below is the message that appears on PXE boot:

Start PXE over IPv4.
Station IP address is 10.0.0.71
ServerIP address is 10.0.0.45
NBP filename is undionly.kpxe
NBP filesize is 95338 Bytes
Downloading NBP file…

Succeed to download NBP file.

[Wayne Workman]

@chrispy I think you’ve mixed up UEFI and BIOS. This machine really looks like it’s a UEFI machine, and your DHCP server is telling it to use a BIOS boot file. You’ll probably want to go over this document and that should put you on track: https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence