Windows 10 EDU 1709 Domain Join Doesn't Work
-
Why don’t you join the domain from the sysprep answer file?
https://technet.microsoft.com/en-us/library/cc730845(v=ws.10).aspx
-
No, I didn’t provide the file. The file actually isn’t changing. I went back in and looked and the last entry in the file had the same 9:00 time stamp that the previous file I sent you had. I also noticed that it doesn’t seem to be updating the host name. Is it possible there is some kind of communication error? I’ve always been able to have them join AD with the tool in FOG, so doing that in the sysprep file was never really something I put a lot of thought into.
-
Hi,
just my 50 cent…
check the specific host for its client service options, i can remember a case where a new client was inventorized but for some reason the options for the host specific client options were disabled.Have you ever tried to disable the option to join the domain for a specific host, delete it’s fog client log and shutdown the machine, enable domain joining again and boot the computer, wait some minutes and supply the fog client log.
@andreiv said in Windows 10 EDU 1709 Domain Join Doesn't Work:
Why don’t you join the domain from the sysprep answer file?
https://technet.microsoft.com/en-us/library/cc730845(v=ws.10).aspx
The op is not asking for other ways. Joining domain is one of the fog clients goal and if we have a problem here everyone like to see it solved, no alternatives!
Hail FOG 
Regards X23
-
I will dig into that tomorrow when I am back at it. Worst case I manually join them this time and just keep plugging away at it. The client service options… Do I look for them in a config file on the client or in my web interface of the server? Again I apologize. I have been using FOG for many years and have built and re built many servers over that time, but some of the recent changes have me re-learning the software all over again.
-
@jay-bosworth
For me, doing it from the sysprep answer file seems the “natural” way. After all, it is built into windows. Why use an external tool, when the built-in one works just fine?
I use third party tools only if Microsoft doesn’t offer a good solution.
For example, I ended up using FOG because Microsoft had no tool that would allow me to deploy dual boot machines. But if you need to deploy only Windows, the RIS from Windows server is an excellent tool. -
@x23piracy I understand. I was just offering a possible solution…
-
@Jay-Bosworth you mentioned you’re using sysprep. Did you follow the client instructions for sysprep? We need more information to help solve this issue https://wiki.fogproject.org/wiki/index.php?title=FOG_Client#FOG_Client_with_Sysprep
. The fact that the client isn’t logging indicates that the client didn’t start. The sysprep mis-configuration is the most likely cause. Regardless, at this point this is likely just an image configuration issue.
@andreiv A quick comment:
Why use an external tool, when the built-in one works just fine?
There are situations where the client is desired over sysprep when joining the domain, such as when you want computers to have the same hostname they have in FOG, and automatically take care of renaming the machine if you change the name in FOG. The client can also deploys software after imaging to help keep images smaller. Now if you’re in an environment where you don’t use the client (no snapins, printer management, hostname, …) then the sysprep unattended file is absolutely the way to go.
TL;DR: The client should be responsible for managing domain bindings if you want to use FOG as a management solution for software, printers, user tracking, and hostname. If you dont want the client, then sysprep unattended work just fine.
-
Yes, I have followed the client directions. It just seems to be these Lenovo’s I am having issues with. Before the sysprep I disabled and stopped the fog service. The setup complete script is in my scripts folder just like I usually do. In my sysprep I have a local account created. After I image I can login with that account and the fog service is running again.
-
@Jay-Bosworth hmmm that is strange then. So its running and not logging? New client logs are appended to the end of the
fog.logfile. -
@jay-bosworth said in Windows 10 EDU 1709 Domain Join Doesn't Work:
Yes, I have followed the client directions. It just seems to be these Lenovo’s I am having issues with. Before the sysprep I disabled and stopped the fog service. The setup complete script is in my scripts folder just like I usually do. In my sysprep I have a local account created. After I image I can login with that account and the fog service is running again.
Hi,
is the service really running? i cant believe that the log stay completely empty, is the fog.log file created?
What your fog service start option? auto or delayed-auto?If auto please try to set it do delayed.
@Joe-Schmitt wasn’t there a race condition with network and service startup?
Regards X23
-
I’ve had it happen where the service appears to be running, but it’s not actually working. I had to re-install the FOG client.
-
I think there might have been an issue where I wasn’t running sysprep fast enough while in audit mode and it was actually joining to the domain before I had a chance to run that like someone mentioned. I am testing that theory right now though. It also appears there may have been a subtle version difference between client version on my images. I will post again when this finished imaging in a couple of minutes.
-
Nope, that didn’t seem to make a difference. I applied my new sysprep imaged and waited at the login screen for about 15 minutes and it never restarted like it usually does after joining the domain.
-
I am going to just start over from scratch with this image and see what happens. I am running out of time to get this ready for production. I will update once I try this again.
-
Looks like it was something wonky in my image. I apologize for any of your time I may have wasted sorting this out. Thanks for all of the help. Now I have an updated server and a working image.
-
