Clone Windows 7 64 bits
-
If you are running 0.30, you will need to run FOGPrep.exe before uploading the image, is that something that you did?
-
First of all, thank you for your feedback …
Yes, I tested by running FogPrep.exe but this has not changed, the error after cloning was still there.
I also read that it was necessary to delete the system partition of 100MB, but with our new PC, the UEFI adds an MSR partition? -
Can you clone same hardware with 32bit windows 7 or xp? Do you know is your HD has advanced format (4K sector format)? [url]http://en.wikipedia.org/wiki/Advanced_Format[/url]
To find out sector format size.
boot with Ubuntu live cd run command
[B]fdisk -l[/B]look for
[B]Sector size (logical/physical): [/B]
[B]I/O size (minimum/optimal): [/B] -
FOG doesnt care if you do or dont have the 100MB boot partition for Windows 7. Either way will work as intended
-
Jian Zhang: I look at it and come back to you for the info.
Blackout: What is the procedure? To the master, and before starting to cloneFogPrep.exe?
-
[SIZE=5][FONT=arial][COLOR=#333333]This is the output of fdisk-l:[/COLOR][/FONT][/SIZE]
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes -
[QUOTE]FOG doesnt care if you do or dont have the 100MB boot partition for Windows 7. Either way will work as intended :)[/QUOTE]
Even if using the “Single Partition (NTFS Only, Resizable)”? -
Can you post all the output from fdisk -l?
-
Coming back to you after several tests.
My model has two partitions. 100MB system partition and the partition.
I run FOGPrep.exe commandesbcdedit and 3.
I prepare FOG putting Windows 7 on the PC and “single partition, resize” the image and this is the result:[url=“/_imported_xf_attachments/0/3_photo.JPG?:”]photo.JPG[/url]
-
please post fdisk -l output on that pc.
-
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x3fbf3665Device Boot Start End Blocks Id System
/dev/sda1 * 1 41 329301 7 HPFS/NTFS
/dev/sda2 42 60801 488054700 7 HPFS/NTFS -
it looks like the problem is the 1st partition it must be 100mb. your 1st partition is 329301 * 512 /1024/1024 = 160.7mb
FOG does not care 32bit or 64bit during the imaging. fogprep.exe will remove master HD id from registry so you don’t get black screen of death on the boot.
try this.
normal wipe you master image HD. Install win7 as normal just hit next. upload load image to FOG with image type:Single Partition (ntfs only, resizable) with host os:windows 7(5)deploy to host.
normal wipe HD, deploy win7 to the new host.let me know this works or not.
Jian
-
[quote=“CamC, post: 64, member: 34”]Even if using the “Single Partition (NTFS Only, Resizable)”?[/quote]
YesEveryone should be running [B]chkdsk /f[/B] on all of their drives before preping the image.
-
This is the result:
I prepared and run Windows FOGPrep.exe then three commands that are doing well.
I ran the sysprep and tried to back up the image.
The upload does not go away -> see image attached[url=“/_imported_xf_attachments/0/4_photo.JPG?:”]photo.JPG[/url]
-
Please follow this guide on trouble shooting an image upload.
[url]http://fogproject.org/forum/threads/wiki-troubleshooting-an-image-upload.21/[/url]
The screenshot looks like it’s failing on the ‘ntfsresize’ command. This is where it will probably error or break.
Generally if the NTFS resize fails, there is some sort of file system issue that has to be fixed with chkdsk.
Any errors, or anything odd should be reported here.