FOG Web GUI speed and default storage activity
-
So far it has not prompted me with database connections. earlier I have cleared the cache on all nodes and rebooted. Seems like it’s working because so far it has not prompted anything with database connections errors and I have been sitting on the dashboard since.
-
@jgallo So, rebooting after you clear the cache nullifies the effects that clearing the cache does, because rebooting does the same thing. I’m trying to isolate if clearing the cache fixes the problems for you.
-
ahh ok. I figured rebooting would reboot all services. Maybe the storage nodes needed a reboot this whole time LOL. There were a few that have been on non-stop for about 90 days. If the messages return, I will do a clear cache and not reboot.
-
So after some time again message came back even after clearing cache and not rebooting. We had to image a computer and I noticed that when the computer tried to check in after the iPXE files were loading prior to imaging that the error for the computer checking in stated the same message as the storage nodes on the dashboard valid database connection could be made. I will image another computer and screenshot that error.
-
Sorry about the late reply here. We had a rogue router on a campus which we were hunting for and eventually found. The error message about the database connection after host registration and prior to actually imaging disappeared. Going to restart again and continue to monitor issue.
-
@jgallo That makes a lot of sense now actually - because nothing about this problem was making sense before. I guess there were IP conflicts on your network causing all the issues - or possibly a routing loop.
Glad it seems to be fixed - let us know if it’s not.
-
Yeh these high schoolers get curious and it wouldn’t be the first time we have dealt with rogue routers.
-
So after several different attempts to see this issue be resolved, the issue continues to persist. The patterns I have observed is that it now takes about an hour for the issue to begin. I have gone into the
/etc/mysql/mysql.conf.d/mysqld.cnffile and edited the bind address to each node because on a seperate post it was recommended to use the IP of the node instead of the loopback. Don’t think this worked because I restarted server and node after these changes and problems persist. I also went into the/var/www/fog/lib/fog/fogurlrequests.class.phpand edited theaconntimeout = 2000to 10000 as well as thecounttimeout = 15;to 30. Would it be possible @Tom-Elliott or someone to remote in to check this out remotely? I know all the passwords for fogstorage accounts are accurate because imaging works fine. Registering computers at sites works fine as well as image replication to storage groups work fine. I could start from scratch and add one node at a time but I could not be able to place a test fog server in place due to this being a production FOG system in place. I have back ups of the images so starting from scratch is not a problem. I have a strange feeling this could be related to Ubuntu and updates with PHP7. Thank you -
Another observation is that upon the
sudo service mysql restarton the fog server, the error goes away for DefaultMember in the dashboard. I tried the same thing on other storage nodes but the message is still in the dashboard. Maybe this could be something with remote connections with the mysql database. -
@Sebastian-Roth remoted in and looks like mysql was limited to 150 connections. He raised it to 250 and now it would appear fixed so far. I’m keeping an eye on the max used connections and it hasn’t gone over 161 so I must have been hitting that 150 max. Thanks for all your help here. Greatly appreciate it.
-
Turns out mysql hit the max connection limit. Not sure what the default limit is but on this system it was 151 concurrent connections. Check for connections numbers are just an example - where much higher on the actual system):
mysql> show status like '%onn%'; +----------------------------------+-------+ | Variable_name | Value | +----------------------------------+-------+ | Aborted_connects | 0 | | Connections | 8 | | Max_used_connections | 4 | | Connection_error_max_connections | 1421 | | Ssl_client_connects | 0 | | Ssl_connect_renegotiates | 0 | | Ssl_finished_connects | 0 | | Threads_connected | 4 | +----------------------------------+-------+See that
Connection_error_max_connectionscount. So we checked themax_connectionssetting and increased it:mysql> show variables like 'max_connections'; +-----------------+-------+ | Variable_name | Value | +-----------------+-------+ | max_connections | 151 | +-----------------+-------+ mysql> set global max_connections = 250;The change takes effect without restarting the server or mysql!
-
I did a git pull and updated FOG to address a Windows 10 issue and upon the update the issue I had with database connections returned. It would appear that mysql goes back to default max connections of 151 after the update. Does the fog installer/updater have mysql update settings? If it does, could I suggest an increase on that max connection limit be part of the fog installer/updater? Or is this something that needs to be manually entered in mysql with the amount of storage nodes and groups I have which was done already to address my issue. Thank you again for your help on this.
-
@jgallo said in FOG Web GUI speed and default storage activity:
It would appear that mysql goes back to default max connections of 151 after the update.
Because the setting was only changed in the MySQL config live. The setting has to be set in the mysql configuration file using the process outlined here: https://wiki.fogproject.org/wiki/index.php?title=Troubleshoot_MySQL#Increase_maximum_simultaneous_MySQL_connections
-
I’m following the steps in Wiki but mysql is on Ubuntu 16.04.3 LTS and when I go to
/etc/mysql/my.cnfand try to add the increase of max connections, it errors out. Modifying themysqld.cnfin/etc/mysql/mysql.conf.dand removing the comment on the line with max connections works. However it’s really odd that when you restart mysql and go into mysql to check the max connections it would show a smaller value then defined in the mysqld.cnf file. Am I right to modify the mysqld.cnf? I’m lost at this but I know that at least the value is increased so it works as intended but with the incorrect value I defined. -
@jgallo I’ll have to look into it, but mysql and mariadb have configuration files where this setting can be used - and when you restart mysql/mariadb it should use the setting and work.
-
@JGallo @Wayne-Workman Just found this on stackexchange. Though it doesn’t say so anywhere in the mysql manual it’s possible that mysql does somehow restrict the max_connections when it’s higher than some internal memory calculations. Maybe give the mysql mem calc a try. On the other hand setting the value up to 250 in the live DB worked like a charm.
Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)
Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG
-
@sebastian-roth said in FOG Web GUI speed and default storage activity:
On the other hand setting the value up to 250 in the live DB worked like a charm.
Sure it works, but it’s not a permanent solution. The changes are undone upon reboot or mysql service restarting.
-
Very true but making the change in the live DB is a great plan B until a long term plan A is found. I checked the mysql mem calc link and I compared the mysqld.cnf settings for those calculations but many of those variables are not there. I think at this point it works and I don’t foresee needing many more storage nodes in the future for this fog server. I’m happy it’s working now. Thank you both for all your help.
