UEFI Boot + DBAN.bzi = Error
-
Hey guys,
I’m a bit stuck. Currently I am attempting to get DBAN to run via PXE boot but I keep getting an Error. (ipxe.org/2e008081)
According to the site there might be a feature missing. I’m thinking its the BzImage feature. My understanding is that this feature is not working in UEFI mode currently. Which lead me to try to boot the dban iso. This still gave me the same error message. I did find this post and followed it but none of the suggestions worked here.Any ideas on how to get this to work in UEFI mode. 85% of our current computers all boot this way now so legacy isn’t an option anymore.
Thanks
Klosty -
@breit said in UEFI Boot + DBAN.bzi = Error:
I suspect, then, this is because DBAN is not EFI bootable currently.
See here:
https://sourceforge.net/p/dban/discussion/208932/thread/a194e3ca/
-
Let me also add that I am running 1.5.0-RC-9 SVN 6080
-
The DBAN.bzi file must be an EFI bootable file too. Maybe need to use an updated version of DBAN? I don’t know fully after that though.
-
@BREIT You might start by posting your exact iPXE command lines so we can have a look. Do you use the iPXE binaries provided by FOG or did you compile your own ones?
Have you tried on different hardware models? Always the exact same error? Which version of DBAN do you use?
Probably also good to take a picture of the error as there is sometimes a small hint for us that you would not spot on your own.
-
@sebastian-roth said in UEFI Boot + DBAN.bzi = Error:
@BREIT You might start by posting your exact iPXE command lines so we can have a look. Do you use the iPXE binaries provided by FOG or did you compile your own ones?
As of where I stopped yesterday here are my Parameters:
:dban
initrd ${boot-url}/iso/dban/dban230.iso
chain memdisk iso rawAll binaries are provided by FOG, I have not complied my own
Have you tried on different hardware models? Always the exact same error?
I have tried 2 different models same error.
Which version of DBAN do you use?
DBAN 2.3.0
Probably also good to take a picture of the error as there is sometimes a small hint for us that you would not spot on your own.
I will make sure to check it out. THANKS!
-
I have also tried to chainload the bzImage with the dban.bzi file but it causes a Kernel Panic.
-
Well, seeing the picture of the error seems to be a little bit more helpful.
Pretty sure memdisk isn’t what you want to use here, that’d be more if you were using ISO directly. Please remove this line from the DBAN items.
Can you try:
https://wiki.fogproject.org/wiki/index.php?title=Include_any_ISO_in_the_FOG_Bootmenu#DBAN -
@tom-elliott said in UEFI Boot + DBAN.bzi = Error:
Well, seeing the picture of the error seems to be a little bit more helpful.
Pretty sure memdisk isn’t what you want to use here, that’d be more if you were using ISO directly. Please remove this line from the DBAN items.
Can you try:
https://wiki.fogproject.org/wiki/index.php?title=Include_any_ISO_in_the_FOG_Bootmenu#DBANsame error message. 2e008081
:dban
kernel ${boot_url}/dban/dban.bzi nuke=“dwipe --autonuke” silent vga=785
boot -
@breit said in UEFI Boot + DBAN.bzi = Error:
I suspect, then, this is because DBAN is not EFI bootable currently.
See here:
https://sourceforge.net/p/dban/discussion/208932/thread/a194e3ca/
-
Yeah, seams like Tom is right: https://superuser.com/questions/1170486/how-to-install-dban-dariks-boot-and-nuke-on-an-usb-flash-drive-larger-than-4g
Dban hasn’t really been maintained in a while. I’d go for a UEFI capable linux distro and either shred or nwipe instead.
Sorry, there is nothing we can do about it.
-
Well looks like i have my answer to my problem. Thanks for the help.
