• Recent
    • Unsolved
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    DHCP Service Issue

    Scheduled Pinned Locked Moved Solved
    FOG Problems
    3
    11
    2.5k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mikec96
      last edited by

      Server
      • FOG Version: 1.4.4
      • OS: Ubuntu 16.04 LTS
      Client
      • Service Version:
      • OS:
      Description

      I have just installed FOG on a clean install of Ubuntu. Upon restarting Ubuntu, I noticed that my DHCP was not working. Based on suggestions previously given to me on the forum, I performed a few troubleshooting steps.

      First, I entered the following into the terminal:

      sudo systemctl status isc-dhcp-server.service

      and received the following result:

      isc-dhcp-server.service - ISC DHCP IPv4 server
  
Loaded: loaded (/lib/systemd/system/isc-dhcp-server.service; enabled; vendor preset: enabled)
   
Active: failed (Result: exit-code) since Tue 2017-09-05 09:57:22 EDT; 1min 43s ago
     
Docs: man:dhcpd(8)
  
Process: 2087 ExecStart=/bin/sh -ec      CONFIG_FILE=/etc/dhcp/dhcpd.conf;      if [ -f /etc/ltsp/dhcpd.conf ]; then CONFIG_FILE=/etc/ltsp/dhcpd.con
 
Main PID: 2087 (code=exited, status=1/FAILURE)



Sep 05 09:57:22 threeriversfog-laptop sh[2087]: Not configured to listen on any interfaces!

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: If you think you have received this message due to a bug rather

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: than a configuration issue please read the section on submitting

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: bugs on either our web page at www.isc.org or in the README file

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: before submitting a bug.  These pages explain the proper

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: process and the information we find helpful for debugging..

Sep 05 09:57:22 threeriversfog-laptop sh[2087]: exiting.

Sep 05 09:57:22 threeriversfog-laptop systemd[1]: isc-dhcp-server.service: Main process exited, code=exited, status=1/FAILURE

Sep 05 09:57:22 threeriversfog-laptop systemd[1]: isc-dhcp-server.service: Unit entered failed state.

Sep 05 09:57:22 threeriversfog-laptop systemd[1]: isc-dhcp-server.service: Failed with result 'exit-code'.

      I also entered this command into the terminal:

      sudo ip a s

      which returned the following:

      1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
   
	link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
   
	inet 127.0.0.1/8 scope host lo
      
		valid_lft forever preferred_lft forever
   
	inet6 ::1/128 scope host 
       
		valid_lft forever preferred_lft forever


2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    
	link/ether 70:e2:4c:68:0e:ca brd ff:ff:ff:ff:ff:ff

      Any ideas about what could be going wrong? Thanks in advance!

      1 Reply Last reply Reply Quote 0
      • george1421G
        george1421 Moderator
        last edited by

        Please review your isc-dhcp server configuration file. I’m suspecting that its not set. Refer to this example for the proper settings: https://wiki.fogproject.org/wiki/index.php?title=BIOS_and_UEFI_Co-Existence#Example_1

        Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

        1 Reply Last reply Reply Quote 0
        • S
          Sebastian Roth Moderator
          last edited by Sebastian Roth

          @mikec96 There is no IP address configured on the interface enp2s0?? What do you see when running ip link and ifconfig -a?

          Web GUI issue? Please check apache error (debian/ubuntu: /var/log/apache2/error.log, centos/fedora/rhel: /var/log/httpd/error_log) and php-fpm log (/var/log/php*-fpm.log)

          Please support FOG if you like it: https://wiki.fogproject.org/wiki/index.php/Support_FOG

          1 Reply Last reply Reply Quote 1
          • M
            mikec96
            last edited by

            @george1421 Is the isc-dhcp server configuration file separate from the dhcpd.conf file? My dhcpd.conf file does not seem to have anything relating to the isc-dhcp section. Below is a copy of the file:

            # DHCP Server Configuration file\n#see /usr/share/doc/dhcp*/dhcpd.conf.sample
# This file was created by FOG
#Definition of PXE-specific options
# Code 1: Multicast IP Address of bootfile
# Code 2: UDP Port that client should monitor for MTFTP Responses
# Code 3: UDP Port that MTFTP servers are using to listen for MTFTP requests
# Code 4: Number of seconds a client must listen for activity before trying
#         to start a new MTFTP transfer
# Code 5: Number of seconds a client must listen before trying to restart
#         a MTFTP transfer
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
option PXE.mtftp-cport code 2 = unsigned integer 16;
option PXE.mtftp-sport code 3 = unsigned integer 16;
option PXE.mtftp-tmout code 4 = unsigned integer 8;
option PXE.mtftp-delay code 5 = unsigned integer 8;
option arch code 93 = unsigned integer 16;
use-host-decl-names on;
ddns-update-style interim;
ignore client-updates;
# Specify subnet of ether device you do NOT want service.
# For systems with two or more ethernet devices.
# subnet 136.165.0.0 netmask 255.255.0.0 {}
subnet 192.168.1.0 netmask 255.255.255.0{
    option subnet-mask 255.255.255.0;
    range dynamic-bootp 192.168.1.10 192.168.1.254;
    default-lease-time 21600;
    max-lease-time 43200;
    #option routers 0.0.0.0
    #option routers 0.0.0.0
    next-server 192.168.1.1;
    class "Legacy" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00000";
        filename "undionly.kkpxe";
    }
    class "UEFI-32-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00002";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-32-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00006";
        filename "i386-efi/ipxe.efi";
    }
    class "UEFI-64-1" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00007";
        filename "ipxe.efi";
    }
    class "UEFI-64-2" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00008";
        filename "ipxe.efi";
    }
    class "UEFI-64-3" {
        match if substring(option vendor-class-identifier, 0, 20) = "PXEClient:Arch:00009";
        filename "ipxe.efi";
    }
    class "SURFACE-PRO-4" {
        match if substring(option vendor-class-identifier, 0, 32) = "PXEClient:Arch:00007:UNDI:003016";
        filename "ipxe7156.efi";
    }
    class "Apple-Intel-Netboot" {
        match if substring(option vendor-class-identifier, 0, 14) = "AAPLBSDPC/i386";
        option dhcp-parameter-request-list 1,3,17,43,60;
        if (option dhcp-message-type = 8) {
            option vendor-class-identifier "AAPLBSDPC";
            if (substring(option vendor-encapsulated-options, 0, 3) = 01:01:01) {
                # BSDP List
                option vendor-encapsulated-options 01:01:01:04:02:80:00:07:04:81:00:05:2a:09:0D:81:00:05:2a:08:69:50:58:45:2d:46:4f:47;
                filename "ipxe.efi";
            }
        }
    }
}
            1 Reply Last reply Reply Quote 0
            • M
              mikec96
              last edited by

              @Sebastian-Roth Apparently not, even though I specified 192.168.1.1 in the installation. I installed FOG while connected to the internet, then disconnected from the internet for use in an isolated network.

              Here is the ip link result:

              1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
    link/ether 70:e2:4c:68:0e:ca brd ff:ff:ff:ff:ff:ff

              And here is the ifconfig -a result:

              enp2s0    Link encap:Ethernet  HWaddr 70:e2:4c:68:0e:ca  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1031 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:213387 (213.3 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:18542 errors:0 dropped:0 overruns:0 frame:0
          TX packets:18542 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1371382 (1.3 MB)  TX bytes:1371382 (1.3 MB)
              george1421G 1 Reply Last reply Reply Quote 0
              • george1421G
                george1421 Moderator @mikec96
                last edited by

                @mikec96 you need to get a static IP address defined for your fog server. That is the first part of the issue. Your dhcp server settings appear correct, so that isn’t the problem.

                Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                1 Reply Last reply Reply Quote 0
                • M
                  mikec96
                  last edited by

                  @george1421 Thank you very much for your help! This might sound like a stupid question, but would I need to do that within Ubuntu’s “Network Connections” tool, or is that something I would need to set within FOG during installation or through the FOG web portal?

                  george1421G 1 Reply Last reply Reply Quote 0
                  • george1421G
                    george1421 Moderator @mikec96
                    last edited by

                    @mikec96 first step is the network connection tool. You need to make linux happy first then rerun the fog installer to get fog realigned with the new IP address.

                    Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                    1 Reply Last reply Reply Quote 0
                    • M
                      mikec96
                      last edited by

                      @george1421 I just set the static IP, and everything works beautifully now! I tested connecting another machine and performing a PXE boot as well. Thanks for your help!

                      george1421G 1 Reply Last reply Reply Quote 0
                      • george1421G
                        george1421 Moderator @mikec96
                        last edited by

                        @mikec96 Case closed now?

                        Please help us build the FOG community with everyone involved. It's not just about coding - way more we need people to test things, update documentation and most importantly work on uniting the community of people enjoying and working on FOG!

                        1 Reply Last reply Reply Quote 0
                        • M
                          mikec96
                          last edited by

                          @george1421 Yes, I’m all set. Am I able to mark the post as solved, or do I not have that ability?

                          1 Reply Last reply Reply Quote 0
                          • 1 / 1
                          • First post
                            Last post

                          288

                          Online

                          11.8k

                          Users

                          17.2k

                          Topics

                          154.9k

                          Posts
                          Copyright © 2012-2024 FOG Project