Problem with HTTPS upgrade
-
Ok, copied those over and got it compiled without any errors. Installed, and still gives the
https://10.63.76.44/fog/service/ipxe/boot.php… No such file or directoryEDIT: it says http:// let me hardcode the https://
-
-
@sebastian-roth said in Problem with HTTPS upgrade:
Can you access this URL from a browser?
Yes
#!ipxe set fog-ip 10.63.76.44 set fog-webroot fog set boot-url http://${fog-ip}/${fog-webroot} cpuid --ext 29 && set arch x86_64 || set arch i386 goto get_console :console_set colour --rgb 0x00567a 1 || colour --rgb 0x00567a 2 || colour --rgb 0x00567a 4 || cpair --foreground 7 --background 2 2 || goto MENU :alt_console cpair --background 0 1 || cpair --background 1 2 || goto MENU :get_console console --picture http://10.63.76.44/fog/service/ipxe/lbs-fog-bg.png --left 100 --right 80 && goto console_set || goto alt_console :MENU menu colour --rgb 0xff0000 0 || cpair --foreground 1 1 || cpair --foreground 0 3 || cpair --foreground 4 4 || item --gap Host is NOT registered! item --gap -- ------------------------------------- item fog.local Boot from hard disk item fog.memtest Run Memtest86+ item fog.reginput Perform Full Host Registration and Inventory item fog.reg Quick Registration and Inventory item fog.deployimage Deploy Image item fog.multijoin Join Multicast Session item fog.sysinfo Client System Information (Compatibility) choose --default fog.local --timeout 10000 target && goto ${target} :fog.local sanboot --no-describe --drive 0x80 || goto MENU :fog.memtest kernel memdisk initrd=memtest.bin iso raw initrd memtest.bin boot || goto MENU :fog.reginput kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=manreg imgfetch init_32.xz boot || goto MENU :fog.reg kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=autoreg imgfetch init_32.xz boot || goto MENU :fog.deployimage login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param qihost 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.multijoin login params param mac0 ${net0/mac} param arch ${arch} param username ${username} param password ${password} param sessionJoin 1 isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme param sysuuid ${uuid} :fog.sysinfo kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=sysinfo imgfetch init_32.xz boot || goto MENU :bootme chain -ar http://10.63.76.44/fog/service/ipxe/boot.php##params || goto MENU autoboot -
@sbenson Ok, we still have some URLs in non HTTPS style (and another one here) in the bootmenu generation PHP code. I am sure @Tom-Elliott will fix this soon.
EDIT: Tom just fixed it, you might want to upgrade to the latest
working… -
THis isn’t a very common ask, but wouuld you mind switching the git branch to
workingwith:git checkout working?I’ve pushed up a hopeful fix to route the httpproto in use for the tftp call to also call the node it’s going to reference.
I do plan, in the near future, to add the ability to check/uncheck if a node is expecting to be used in https mode, though how to build the binaries with this in mind is a not simple.
-
@tom-elliott said in Problem with HTTPS upgrade:
git checkout working
Switched, Pulled, errored about changed, Deleted the packages dir, pulled.
Should I run buildIpxe?
-
@sbenson if you would like, please.
Though I’m going to imagine the pull failed to switch.
Try:
git reset --hard git checkout working git pull /root/buildIpxe TRUST=/var/www/fog/management/other/ca.cert.pem cd bin ./installfog.sh -y -
@tom-elliott the whole problem is the -S, so i am guessing you want a -S in there too?
EDIT: Did not work still, and is listed as http:// not https:// so default.ipxe didn’t get changed
EDIT2: Hardcoded https in /tftpboot/default.ipxe. now it booting says https but still file not found -
@sbenson Open https://10.63.76.44/fog/service/ipxe/boot.php in your browser again and see if there are still http:// URLs or https:// now! Post the full output here if you would like us to have a look as well.
-
@sebastian-roth it’s all https now
-
@sbenson Please post the output and a picture of the error on screen as well. I am pretty sure there is something that we all overlook but might notice when we see listing and picture of the error.
-
-
@sbenson
I just went through this exact process to get HTTPS working for my fog deployment. One of the more helpful things, especially for where you are at right now, was to enable debugging on the ipxe build as the file not found error was due to a couple of other issues related to the certificate. Additionally, although it shouldn’t have been necessary, building the CA certificate into the ipxe build solved another issue I had with it. To do the above, using Tom’s script, you would pass CERT and DEBUG to it like so (I used my own CA cert and not the FOG one, so the paths were different for me, but should be correct for you. Additionally, tls is likely the only debug option that you might need, but just in case I included the others):/root/buildIPXE CERT=/var/www/fog/management/other/ca.cert.pem TRUST=/var/www/fog/management/other/ca.cert.pem DEBUG=tls,x509,certstoreOnce built, you’ll of course need to reinstall FOG with the new build. When the client boots, it should give you much more insight into what is happening and why it is reporting the file cannot be found (assuming building in the cert doesn’t solve the issue you’re having). Once it booted, I ran into an issue with the check-in script not understanding the HTTPS redirect, but this is resolved in the working version now (I’m personally on the current release version, with some custom changes that are already in the working version).
Hope it helps.
EDIT: Oh, should probably also point out that if you do try this and eventually get it working, removing the debugging after would be a good idea so your systems don’t spew out debug text on boot.
-
@bmcalister Thank you, I’m not familiar with the process to build in certificates to this helps me out just as much as the community as a whole. I didn’t even know there was a CERT argument that could be passed in.
@sbenson Hopefully this helps you too and sorry I didn’t know about this sooner.
-
@bmcalister Well guess what, it’s working now. Something in the
/root/buildIPXE CERT=/var/www/fog/management/other/ca.cert.pem TRUST=/var/www/fog/management/other/ca.cert.pem DEBUG=tls,x509,certstorefixed it. So, turning debugging off might not work. Deploying an image now to see if that works, which seems to be working.
-
@tom-elliott said in Problem with HTTPS upgrade:
CERT argument
Oh I am so over this issue i am blindly copying and pasting commands that look correct at first glance. I totally missed the CERT= argument
-
Here’s something else I have found now. Deploying an image is going at 127MB/min, where previously it was going at 8GB/min
-
@sbenson Maybe a fluke? Mind restarting the fog server see if it helps out a little?
I doubt there’s anything else causing it as the init’s have nothing to do with the network boot process (after iPXE releases the init’s and kernels) which hasn’t changed beyond the change to actually follow the redirects back to the fog server in https mode as required.
-
@tom-elliott I will reboot it(its a VM), but I also attempted to register a host and it didn’t work 3 times.
http://www.youtube.com/watch?v=sCV7x1zKBwE -
@sbenson No Viable mac’s to use… hmmmm. I’ll take a quick look for that.
