I would like add a new hdd ...

[afaure]

Hi @george1421
Ok i waiting your tutorial

Thanks !!

[george1421]

@afaure Sorry. I finished it last week, but forgot to post a link here. https://forums.fogproject.org/topic/10450/adding-additional-image-storage-space-to-fog-server

It did install correctly and work as expected. The first post talks about setting up the operating system and the second post shows what FOG settngs are needed.

[afaure]

@george1421 Thanks for the tuto.

For information, I just updated the FOG !
I can select my new storage but i have a problem of permission !!

I reading your documentation and post the result later !!

Big thanks @george1421

[george1421]

@afaure Well, lets hold the thanks for a little while. I just LOOKED at the proof of concept server again AND the capture image IS going to /images and not /images2!!!

On the negative side my tutorial does not work as intended. On the plus time I can duplicate your results exactly. Which is VERY strange since I saw (and posted in the tutorial) that partclone was saying it was copying to /images2/dev. I’m going to duplicate the test since the environment is still setup from last week to confirm. If I can confirm for sure that things are not working right I’ll ask the developers to take a second look at the FOG code since things don’t “appear” to be doing what we are telling them.

[george1421]

What you are seeing has been confirmed and I can duplicate it over and over. I have issued a bug check with the developers.

[george1421]

@george1421 The developers got back with me and there was a flaw in what I did with the instructions. By simply copy and pasting the nfs exported filesystem I introduced the error.

In the exportfs file the following was the incorrect instructions.

17. Append the following lines to the end of the exports file

/images2 *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=0)
/images2/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=1)

The fsid value should have been incremented to not duplicate the fsid for two shares on the same server. So for the /images2 share the fsid should be 3 and /images2/dev fsid should be 4. The correct line should be this:

/images2 *(ro,sync,no_wdelay,no_subtree_check,insecure_locks,no_root_squash,insecure,fsid=3)
/images2/dev *(rw,async,no_wdelay,no_subtree_check,no_root_squash,insecure,fsid=4)

[afaure]

Thanks @george1421 i have try this.
I have an error at the end

Where are you ftp_login

Thanks for the next reply

[Tom Elliott]

@afaure On the second storage node that’s connected to the same server, you need the same management username and password as the original server has.

[afaure]

@Tom-Elliott thanks.

The same user/password is used on the configuration node.
I have inspect the box with management password.
I have copy/paste the password

[george1421]

@afaure In your case (as Tom posted) your ftp managmeent password is wrong.

In step 6 of the tutorial, ensure the management user name and password are set correctly. You can find out the answers there if you review the /opt/fog/.fogsettings file.

[afaure]

@george1421 i have been used the same username/password for the node by default.

I have create a new image/association with PC and NOW it’s WORKS !!!

A big thank you dude ! It’s DONE !

Thanks everyone !

[george1421]

@afaure Really nice. I needed to write that tutorial for a while now. With your motivation its now done and works!!

[afaure]

@george1421 ahah thanks really

I will be back soon (tomorrow) for a new thread
I used FOG since 3 years and this solution is beautiful !

@george1421 thank you so much
Have a good night