I would like add a new hdd ...

[george1421]

@Quazz said in I would like a add a new hdd ...:

it has to be set as master node for it to capture images

Exactly, I was thinking about this as I commuted into the office this AM. Only the master node(s) can receive images. But that still doesn’t explain why its picking a master node in a different storage group.

[george1421]

Cross linking threads since the experience appears to be similar: https://forums.fogproject.org/topic/10442/location-plugin-not-working-after-update-to-1-4-4

[Tom Elliott]

“STOCK 2” is not a master node, so capture of images would go to the “master” node of the group it’s in.

[george1421]

@Tom-Elliott Great eye. I was focusing too much on the paths and devices to see that silly checkbox. That master node needs to be checked.

But I find it strange why it used storage1?? Wouldn’t / shouldn’t it say, “Hey, MR IT guy there are not active master nodes in my storage group. I have no place to capture this image” ??

[afaure]

@Tom-Elliott @george1421 @Quazz thanks for reply.

I would like capture images with the default node and the new node storage2.
Storage2 is alone one the group storage.

Default = 1hdd
Storage2 = 1 hdd

I need to check the box “master node” to use the two datastores ?

[george1421]

@afaure You have 2 storage groups. Each storage group needs a master node, since only master nodes can receive captured images. If you want to capture images and save them to each datastore then you do need to check the master node, as long as they are in their own storage group.

[afaure]

@george1421 said in I would like a add a new hdd ...:

You have 2 storage groups. Each storage group needs a master node, since only master nodes can receive captured images. If you want to capture images and save them to each datastore then you do need to check the master node, as long as they are in their own storage group

Ok, i going check this box and try a new capture.
I will be back !

Thanks everywhone !

[afaure]

I’m sorry.
It doesn’t work…

I have check the box and the result is equal.
The node 1 (Default) is used to the capture

Do you have an idea ??

In the image configuration the node group is default.
I can’t change this settings…

Thanks.

[Quazz]

@afaure Hi. On that page, on the left hand side there is Image Menu. The second option is Storage Group. Click on that. You can now choose a storage group.

[afaure]

@Quazz it doesn’t work…

[Quazz]

@afaure What do you mean? What goes wrong?

[afaure]

@Quazz said in I would like a add a new hdd ...:

What do you mean? What goes wrong?

I can’t change this settings …
I trying to change this settings to storage2 but it doesn’t work.

[afaure]

@afaure said in I would like a add a new hdd ...:

@Quazz said in I would like a add a new hdd ...:

What do you mean? What goes wrong?

I can’t change this settings …
I trying to change this settings to storage2 but it doesn’t work.

Two screenshots to explain my situation:

So, i check the box for storage2 and click on “Add Image…” or “Update primary group” but the node default are keep

[Quazz]

Hmm, it’s working on my end.

Is there anything in the apache error logs? (FOG Configuration -> Log viewer -> Drop down apache error log)

[afaure]

@Quazz no log available.

The message printing is “unable to open a file”

In the configuration of a new node.
The “password management” is the same of fog user ?

[Quazz]

@afaure Yes, but to be precise, it is the FOG linux account. Not the Web login.

If you don’t know/remember this, the password should be in /opt/fog/.fogsettings

[george1421]

@afaure I’m in an add day meeting today so very little time, but just wanted to add. Make sure the file permissions on /images2 match the same as /images.

[afaure]

@Quazz it’s ok. The good password are used…

[afaure]

@george1421 thank you. It’s ok now.
But, i can’t change the storage group of the image…
The storage group “default” are keep all the time…

[Tom Elliott]

Maybe I’m seeing the obvious where others are missing it. Can you update to at least the latest stable and see if the problems you’re seeing with adjusting groups and what not are fixed? It appears you’re running a version of 1.3.5-RC from what I can tell.

All the more reason we want “version” information when opening information about a problem…
RABBLE RABBLE RABBLE.