CentOS 7 Problems
-
@Dino_Nerd said in CentOS 7 Problems:
192.168.0.15
also save to assume that ^^ is your fog server IP address?
-
update
#!ipxe
set fog-ip 192.168.0.15
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://192.168.0.15/fog/service/ipxe/bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap – -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
choose --default fog.local --timeout 3000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.0.15/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.0.15:/images/ storageip=192.168.0.15 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.0.15/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.0.15:/images/ storageip=192.168.0.15 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=192.168.0.15/fog/ consoleblank=0 rootfstype=ext4 storage=192.168.0.15:/images/ storageip=192.168.0.15 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:bootme
chain -ar http://192.168.0.15/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot
-
@george1421 said in CentOS 7 Problems:
@Dino_Nerd said in CentOS 7 Problems:
192.168.0.15
also save to assume that ^^ is your fog server IP address?
bump
-
@Dino_Nerd Were you able to complete the steps that Sebastian requested
@Dino_Nerd Can you access/download the picture (http://192.168.0.15/fog/service/ipxe/bg.png) or the kernel (http://192.168.0.15/fog/service/ipxe/bzImage) from your browser?
If you can then the web bits are in place and correct.
Just to be sure you did set selinux to permissive right?
-
@george1421 said in CentOS 7 Problems:
@Dino_Nerd Were you able to complete the steps that Sebastian requested
@Dino_Nerd Can you access/download the picture (http://192.168.0.15/fog/service/ipxe/bg.png) or the kernel (http://192.168.0.15/fog/service/ipxe/bzImage) from your browser?
If you can then the web bits are in place and correct.
Just to be sure you did set selinux to permissive right?
yes,
root@fog:~# getenforce
Permissive
root@fog:~# -
Is there a solution to this?
I’d be very surprised if debian was more stable than a RHEL based OS. -
@Dino_Nerd I’ll ask the same question yet again
@Dino_Nerd Were you able to complete the steps that Sebastian requested
@Dino_Nerd Can you access/download the picture (http://192.168.0.15/fog/service/ipxe/bg.png) or the kernel (http://192.168.0.15/fog/service/ipxe/bzImage) from your browser?
-
@george1421 said in CentOS 7 Problems:
@Dino_Nerd I’ll ask the same question yet again
@Dino_Nerd Were you able to complete the steps that Sebastian requested
@Dino_Nerd Can you access/download the picture (http://192.168.0.15/fog/service/ipxe/bg.png) or the kernel (http://192.168.0.15/fog/service/ipxe/bzImage) from your browser?
yes and yes.
Sorry I thought I already answered this but I guess I hadn’t.I also reinstalled as BIOS machine instead of UEFI
My currently running FOG server is CENTOS 7 BIOS. I updated the requested files below -
Are you doing any weird redirects? For example FOG is expecting to look to /var/www/html/fog (http://SomeIP/fog/)
But you have it set to go: http://someIP and it’s passing you to the fog site? -
Also can you please check FOG Configuration Page->FOG Settings->Web Server->FOG_WEB_ROOT and make sure it’s not set to
WEB_ROOT, aka please set to/fog/ -
The really feels like a double installation almost. Though I don’t know quite how to describe it.
-
@Tom-Elliott said in CentOS 7 Problems:
The really feels like a double installation almost. Though I don’t know quite how to describe it.
I’ve fresh installed CentOS with fog at least 5 times now and keep getting the same result
I attempted a fog installation with Archlinux as well and got this same result.
by fresh install, I mean wiping the hard drive completely and installing a brand new OS, then installing fog@Tom-Elliott said in CentOS 7 Problems:
Also can you please check FOG Configuration Page->FOG Settings->Web Server->FOG_WEB_ROOT and make sure it’s not set to
WEB_ROOT, aka please set to/fog/
@Tom-Elliott said in CentOS 7 Problems:
Are you doing any weird redirects? For example FOG is expecting to look to /var/www/html/fog (http://SomeIP/fog/)
But you have it set to go: http://someIP and it’s passing you to the fog site?This is a clean install, I haven’t changed any settings that aren’t stock
