1.4.1 Unable to register host (/bin/fog.man.reg)
-
-
Just wanted to say that I’m experiencing the same error with 1.4.1. I recently set up a physical Ubuntu box with FOG 1.4.1 to do some testing and haven’t been able to register any hosts with it. Previously had version 1.3.5 on a virtual Ubuntu machine which was having no issues. I’m getting the same screen as the picture zclift15 posted.
-
@zclift15 It appears to me FOG is not recognizing your network adapter.
See where it says "Version: "? That should show “Version: 1.4.1” (Or whatever version you’re running.)
-
@Tom-Elliott
Do mean to say the network adapter on the computer or on the server? The server is a virtual box that is on bridged adapter eth4. -
@zclift15 The computer, not the server.
-
I’m getting the same error. I rebooted mine to get that error cleared. This is on ubuntu 17.04.
I’m also getting nfs failed, and unable to check in. Trying to send a image to the server. -
The same thing happens to me when I try send an image after manually registering the host
-
@Tom-Elliott
Would you have any suggestions on a fix on the server side? Because I have over 100 computers (not all the same model) and it doesn’t seem to work on any of them . -
I am having the same issues with Fog 1.4.1 on Ubuntu 16.04 LTS installed on a physical machine with an Intel NIC. Any suggestions?
-
There’s nothing you can do server side. We need to know what the nic is, if FOS is recognizing the nic (or failing to get an IP address), and/or if there’s actually a problem with the nic itself.
-
Fresh install of FOG 1.4.1 here. I am getting the same issue on multiple computers. I’m at a business so I have many types of computers to test with. I re-installed Ubuntu server 16.04,17.04, and FOG about 7 times so far because I thought it was something I was doing. I’m glad I saw this thread.
This issue is happening on each computer that I’ve tested and I cannot get around it.
-
@ddeatrich Can you show a picture of the message? I tested 1.4.1 registering and had no issues on myside.
-
@Tom-Elliott It is literally the same exact picture that User zclift15 submitted earlier. Everything is the exact same other than the IP addresses on there.
-
Please add:
isdebug=yesto FOG Configuration Page->FOG Settings->General Settings->FOG_KERNEL_ARGSLoad into registration please. (this will make the system drop into a terminal so we can debug more).
-
@Tom-Elliott Done. Debug mode set on kernel and ran quick registration on host computer. What would you like me to do?
-
@ddeatrich What’s output of:
ifconfig -a -
@Tom-Elliott http://i.imgur.com/BM6qDjx.jpg
Sorry for imgur. It kept giving me errors when I tried to upload the image.
-
So, for the IP Address, from there can you
ping <ipoffogserver>? -
@Tom-Elliott Yup. The server replies just fine. No issues
-
@ddeatrich Anything in your fog server’s Apache error log?
