Problem with HTTPS upgrade

sbenson

@wayne-workman
I actually already tried this. Still doesn’t work

EDIT: well tried the default.ipxe file. I am not sure where to try the

make bin-x86_64-efi/ipxe.efi EMBED=ipxescript TRUST=/var/www/fog//management/other/ssl/srvpublic.crt

Sebastian Roth

@sbenson This command is used to compile an iPXE binary from the source code and add the SSL certificate to it. Instructions on how to do this you can find in the wiki. Those instructions are for legary (undionly.kpxe) as well as for 32 bit UEFI and 64 bit UEFI. make sure you compile and put the correct ones into your /tftpboot directory. Possibly you want to compile all three if you have all those different clients. Let us know if you need help. Please post exact command and steps you tried and the error message you see. Then we will surely be able to help.

sbenson

@sebastian-roth Ok, this was working on 1.3.0 rc like 15 or something. Upgrading to 1.5.0-rc4 seemes to have broken this.

Tom Elliott

@sbenson Then it’s something in ipxe code that changed this, which is well outside my own scope.

sbenson

@tom-elliott Any suggestion on how to get it working. I did notice in the error logs i found this on each attempted boot

==> syslog <==
Aug  7 11:37:25 SRO-FOG-01 in.tftpd[24901]: tftp: client does not accept options

Sebastian Roth

@sbenson said in Problem with HTTPS upgrade:

@sebastian-roth Ok, this was working on 1.3.0 rc like 15 or something. Upgrading to 1.5.0-rc4 seemes to have broken this.

What exactly do you mean by “broken”?? Please post a picture of the error you see!

The tftpd message you see in syslog is just kind of a warning. Nothing serious and definitely not causing the problem.

sbenson

@sebastian-roth

Configuring (net0 MA:CA:DD:RE:SS:00)..... ok
Received DHCP answer on interface net0
tftp://10.64.76.44/default.ipxe... ok
https://10.63.76.44/fog/service/ipxe/boot.php... No such file or directory (http://ipxe.org/2d0c613b)
Could not boot: No such file or directory (http://ipxe.org/2d0c613b)

Tom Elliott

@sbenson said in Problem with HTTPS upgrade:

https://10.63.76.44/fog/service/ipxe/boot.php

And if you goto the link as is directly in the browser?

Tom Elliott

@sbenson What I’m seeing off the bat:

tftp://10.64.76.44/default.ipxe… ok

VS default.ipxe forwarding to:
https://10.63.76.44/fog/service/ipxe/boot.php

(10.64.76.44 vs. 10.63.76.44)

george1421

@sbenson Please check the content of your /tftpboot/default.ipxe file. Did you happen by chance make a type-o when you installed fog or changed it IP address after you installed FOG? If so there are steps you need to take to get all of the bits back in alignment.

sbenson

@tom-elliott

@tom-elliott said in Problem with HTTPS upgrade:

@sbenson said in Problem with HTTPS upgrade:

https://10.63.76.44/fog/service/ipxe/boot.php

And if you goto the link as is directly in the browser?

#!ipxe
set fog-ip 10.63.76.44
set fog-webroot fog
set boot-url http://${fog-ip}/${fog-webroot}
cpuid --ext 29 && set arch x86_64 || set arch i386
goto get_console
:console_set
colour --rgb 0x00567a 1 ||
colour --rgb 0x00567a 2 ||
colour --rgb 0x00567a 4 ||
cpair --foreground 7 --background 2 2 ||
goto MENU
:alt_console
cpair --background 0 1 ||
cpair --background 1 2 ||
goto MENU
:get_console
console --picture http://10.63.76.44/fog/service/ipxe/lbs-fog-bg.png --left 100 --right 80 && goto console_set || goto alt_console
:MENU
menu
colour --rgb 0xff0000 0 ||
cpair --foreground 1 1 ||
cpair --foreground 0 3 ||
cpair --foreground 4 4 ||
item --gap Host is NOT registered!
item --gap -- -------------------------------------
item fog.local Boot from hard disk
item fog.memtest Run Memtest86+
item fog.reginput Perform Full Host Registration and Inventory
item fog.reg Quick Registration and Inventory
item fog.deployimage Deploy Image
item fog.multijoin Join Multicast Session
item fog.sysinfo Client System Information (Compatibility)
choose --default fog.local --timeout 10000 target && goto ${target}
:fog.local
sanboot --no-describe --drive 0x80 || goto MENU
:fog.memtest
kernel memdisk initrd=memtest.bin iso raw
initrd memtest.bin
boot || goto MENU
:fog.reginput
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=manreg
imgfetch init_32.xz
boot || goto MENU
:fog.reg
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=autoreg
imgfetch init_32.xz
boot || goto MENU
:fog.deployimage
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param qihost 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.multijoin
login
params
param mac0 ${net0/mac}
param arch ${arch}
param username ${username}
param password ${password}
param sessionJoin 1
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
param sysuuid ${uuid}
:fog.sysinfo
kernel bzImage32 loglevel=4 initrd=init_32.xz root=/dev/ram0 rw ramdisk_size=127000 web=10.63.76.44/fog/ consoleblank=0 rootfstype=ext4 storage=10.63.76.44:/images/ storageip=10.63.76.44 loglevel=4 mode=sysinfo
imgfetch init_32.xz
boot || goto MENU
:bootme
chain -ar http://10.63.76.44/fog/service/ipxe/boot.php##params ||
goto MENU
autoboot

sbenson

@tom-elliott said in Problem with HTTPS upgrade:

(10.64.76.44 vs. 10.63.76.44)

This was a typo when I transposed the ipxe screen to here. Posting images wasnt working for me

sbenson

@george1421 said in Problem with HTTPS upgrade:

@sbenson Please check the content of your /tftpboot/default.ipxe file. Did you happen by chance make a type-o when you installed fog or changed it IP address after you installed FOG? If so there are steps you need to take to get all of the bits back in alignment.

Typo when putting the info in this ticket. the IP of the server is 10.63.76.44

#!ipxe
cpuid --ext 29 && set arch x86_64 || set arch i386
params
param mac0 ${net0/mac}
param arch ${arch}
param platform ${platform}
param product ${product}
param manufacturer ${product}
param ipxever ${version}
param filename ${filename}
param sysuuid ${uuid}
isset ${net1/mac} && param mac1 ${net1/mac} || goto bootme
isset ${net2/mac} && param mac2 ${net2/mac} || goto bootme
:bootme
chain https://10.63.76.44/fog/service/ipxe/boot.php##params

Tom Elliott

@sbenson
Can you please read this:

http://ipxe.org/err/2d0c61

You’ll likely need to build the file with the CA file itself, typically located in ca.cert.der (/var/www/fog/management/other/ca.cert.der)

Sebastian Roth

@sbenson Well, compare the URLs again. The one xou opened in your browser is HTTPS and the other one called by ipxe is HTTP…

sbenson

@sebastian-roth said in Problem with HTTPS upgrade:

@sbenson Well, compare the URLs again. The one xou opened in your browser is HTTPS and the other one called by ipxe is HTTP…

I updated the default.ipxe to use https. as seen in the previous post.

Sebastian Roth

@sbenson So is this solved then?

sbenson

@sebastian-roth No, now the ipxe boot screen says https, and still doesn’t work. I have not re-created the SSL cert as Tom said.

Sebastian Roth

@sbenson What Tom was saying is not re-creating the SSL certs but compiling your own iPXE binaries with the cert included…

sbenson

I am not sure how to recompile ipxe. I did just upgrade from RC4 to RC7 and it didn’t help. I have done a git pull and dont see anywhere to compile it

Problem with HTTPS upgrade

147

12.0k

17.3k

155.1k