Client does not load after install
-
Server
- FOG Version: 1.3.5
- OS: Ubuntu 16.04
Client
- Service Version: New version ???
- OS: Windows 7
Description
At this point I only want to capture an image of a pc that I can reload on the same pc to recover from a malware or similar compromise. I have the FOG server running. I have installed the fog client on the pc. when I reboot the pc it never connects to the FOG menu. When I attempt to capture an image the pc begins boot-looping. Any assistance would be appreciated.
-
We need a few more details here.
What do you have configured for dhcp options 66 {next-server} and 67 {boot-file}
What target computer are you trying to pxe boot? (mfg, make, model)
Is the target computer in uefi or bios (legacy mode).
Since you can’t get to the fog iPXE menu, how are you registering these devices to image them?I could go on, but lets start with above.
-
DHCP options 66 = 192.168.201.76 (fog server ip address
67 = undionly.kpxe
Target computer: Lenovo ThinkCentre M900
Target computer is in bios
After I install the fog client the pc shows up in hosts but I’m not able to complete a registration -
I was able to find and correct the error.
Thanks
-
@captatim Would you mind telling us what the problem was and how you were able to fix it? Other users might find this information very helpful too. Thanks in advance!
