Ubuntu Image for FOG Clients

[fogubuntu]

Thank you for the response. Manually changing the boot order on each machine should not be an issue. However, once I do this and have the clients boot the FOG PXE menu and select Boot from disk, I get a blank screen with a cursor and the OS does not load.

Will re-installing Ubuntu on the source machine without LVM fix this? I am unable to determine what is causing this.

[Wayne Workman]

@fogubuntu For fixing the blinking cursor, I know you’ve already said you’ve messed around with the Exit Type - have you tried all the exit type options? And where are you changing the exit type?

[fogubuntu]

@Wayne-Workman Yes, I tried all the exit types. I changed this in the following location:

FOG Configuration > iPXE Boot Menu > Exit to Hard Drive type

[Wayne Workman]

@fogubuntu That’s just the default for newly registered hosts. Change the setting for the host you’re working with in Host Management. Pictured below.

[fogubuntu]

@Wayne-Workman I did change it there too. Changing in the default for newly registered hosts worked the same way. Some options resulted in a blank screen with a blinking cursor and some had a message saying Starting cmail()... and nothing happened.

[Wayne Workman]

@fogubuntu This is interesting. Can you run some commands on your reference machine you’re working with (on it’s OS) and get us the output so we can see how the disk is laid out please? Please copy/paste the output into a code box.

lsblk
pvdisplay
vgdisplay
lvdisplay
df -h
fdisk -l

[fogubuntu]

@Wayne-Workman Following is the output for df -h:

Filesystem      Size  Used Avail Use% Mounted on
udev            7.8G     0  7.8G   0% /dev
tmpfs           1.6G  9.7M  1.6G   1% /run
/dev/sda2       213G   12G  191G   6% /
tmpfs           7.8G  260K  7.8G   1% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           7.8G     0  7.8G   0% /sys/fs/cgroup
/dev/sda1       511M  3.6M  508M   1% /boot/efi
tmpfs           1.6G  4.0K  1.6G   1% /run/user/108
tmpfs           1.6G   56K  1.6G   1% /run/user/1000

And the output of fdisk -l

Disk /dev/ram0: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram1: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram2: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram3: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram4: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram5: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram6: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram7: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram8: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram9: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram10: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram11: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram12: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram13: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram14: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/ram15: 64 MiB, 67108864 bytes, 131072 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes


Disk /dev/sda: 232.9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 4430D5FA-2CED-4B96-A4E8-E41E0DAFEE53

Device         Start       End   Sectors   Size Type
/dev/sda1       2048   1050623   1048576   512M EFI System
/dev/sda2    1050624 455012351 453961728 216.5G Linux filesystem
/dev/sda3  455012352 488396799  33384448  15.9G Linux swap


Disk /dev/sdb: 7.5 GiB, 8015314944 bytes, 15654912 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x15e2543d

Device     Boot Start     End Sectors  Size Id Type
/dev/sdb1  *        0 3035519 3035520  1.5G  0 Empty
/dev/sdb2       14432   19295    4864  2.4M ef EFI (FAT-12/16/32) 

[Wayne Workman]

@fogubuntu Looks like a GPT type disk, you should be using the UEFI exit types. Please try all of those on the host you’re working with.

[fogubuntu]

@Wayne-Workman I did try all the exit types but I will give this another shot. What is the difference between Host BIOS Exit Type and Host EFI Exit Type?

I did also change the boot type on the client machine’s BIOS to UEFI.

[Wayne Workman]

@fogubuntu said in Ubuntu Image for FOG Clients:

What is the difference between Host BIOS Exit Type and Host EFI Exit Type?

The BIOS exit type only applies to BIOS type systems. So this is the setting used if it’s operating as BIOS. If the system is UEFI, then only the EFI exit type setting is used for that system.

I did also change the boot type on the client machine’s BIOS to UEFI.

When and on what? The reference machine? The destination machine? Before capture? After capture? Before deployment? After deployment?

I’m thinking this whole thing may be a mix-up of system settings. Here’s some rules:

If your reference machine is operating in BIOS mode when you capture the image - then all machines you deploy this image to must be in BIOS mode for it to work right.

If your reference machine is operating in UEFI mode when you capture the image - then all machine syou deploy this image to must be in UEFI mode for it to work right - and secure boot must be disabled.

[fogubuntu]

@Wayne-Workman said in Ubuntu Image for FOG Clients:

When and on what? The reference machine? The destination machine? Before capture? After capture? Before deployment? After deployment?

I changed the setting on the destination machine after deployment.

Using the same settings as the reference machine did not work either.

[fogubuntu]

@Wayne-Workman I used the same settings as the source machine on the clients and I still get the blank screen or Starting cmain() message and the OS won’t load.

Is there any other settings I should look into to fix this?

[Wayne Workman]

@fogubuntu you didn’t run all the commands that I previously requested - I need the output of those to determine if your using lvm or not. Fog does not support Resizable lvm - the image will not be usable.

[Tom Elliott]

You’ve tried “EFI Exit” with rEFInd? This really doesn’t seem to be a problem with LVM or disk information, directly.

It really really feels like it’s trying to boot across incompatible types.

Please try network booting using EFI by enabling the Network Stack and PXE Network Stack. Then try setting the “EFI Exit” to rEFInd.

This will mean you need to use one of the EFI labeled boot files, but this can typically be automated.