Problem with size of partitions

[michelsantana]

d1.partitions
label: dos
label-id: 0x5a45dfe4
device: /dev/sda
unit: sectors

/dev/sda1 : start= 2048, size= 1070592, type=7, bootable
/dev/sda2 : start= 1072640, size= 189747430, type=7
/dev/sda3 : start= 190852200, size= 434285145, type=7

---

d1.minimum.partitions

label: dos
label-id: 0x5a45dfe4
device: /dev/sda
unit: sectors

/dev/sda1 : start= 2048, size= 65024, type=7, bootable
/dev/sda2 : start= 1072640, size= 37683712, type=7
/dev/sda3 : start= 190852200, size= 257024, type=7

[Tom Elliott]

Can you create a debug task and add “ismajordebug=1” to the kernel arguments for the host?

Step through and get the output of the sgdisk information?

It will be slow, but please it will help tremendously.

[michelsantana]

@Tom-Elliott This is the output of the sgdisk command once booted with a debug deploy task with the kernel argument that you have resquested. Don’t know if is this what you are talking about.
Thank you

[Tom Elliott]

sfdisk is much more useful if you can get it.

You would start the “debug” task.

At the command prompt type fog

Step through it slowly.

It will show the output of the sfdisk as it gets applied.

[michelsantana]

@Tom-Elliott This is the output of the command you have requested. Now I only have access to a Virtual Machine, but I guess that the problem is the same. Here you have the captures in sequence:

[Tom Elliott]

@michelsantana So based on what I’m seeing, this may be a problem simply because it has no extended partitions.

I’m taking a look at the main scripts to try to narrow down another (but separate) issue so I can try to see if i can get the logic out of this too. Thanks for the information thus far.

[michelsantana]

@Tom-Elliott You are more than welcome. And yes, in our configuration all the partitions are primary, so we don’t have any extended partition.

Thank you very much

[Tom Elliott]

@michelsantana can you get the size of the disk you’re trying to apply this to?

blockdev --getsz /dev/sda I think should do it.

[michelsantana]

@Tom-Elliott In the previous example the machine (Virtual) had a 60GB hard disk. Just for testing purposes I increased the size of the harddisk to 180GB and this are the results. As you can see there is no error this time with extended partitions but the sizes of the partitions still doesn’t have the right proportions.

[Tom Elliott]

@michelsantana I realize that and am replicating your d1.minimum.partitions and d1.partitions file.

I know what’s causing it too btw.

[michelsantana]

@Tom-Elliott It seems like it’s taking the d1.minimum.partitions as source to determine the proportion between partitions instead of the d1.partitions. In our example the sda3 partition is the bigger one in size but it’s almost empty.

[Tom Elliott]

@michelsantana I know what’s causing it, just trying to figure out a way around it in a nice method.

[Tom Elliott]

Mind trying these:

Init’s are up at:

http://mastacontrola.com/init.xz
http://mastacontrola.com/init_32.xz

wget -O /var/www/fog/service/ipxe/init.xz http://mastacontrola.com/init.xz
wget -O /var/www/fog/service/ipxe/init_32.xz http://mastacontrola.com/init_32.xz

[michelsantana]

@Tom-Elliott I have downloaded those files and repeated the process. There is a minor error than you can see in the first capture, but it seems that the problem is solved. Tomorrow I will try a deployment with a physical machine and post the results.
Thank you very much for your help!

[Tom Elliott]

@michelsantana I’m pushing fix for the error’s being spat out.

[Tom Elliott]

Fix for the missed elements should be up if you wanted to retest.

[michelsantana]

@Tom-Elliott Perfect! I will try again and post the results

[michelsantana]

@Tom-Elliott Still one error

[Tom Elliott]

@michelsantana Fix for this then is now up too! THanks for helping

[michelsantana]

@Tom-Elliott You’re welcome. Here are the results after the last modifications you have uploaded. Seems like there are no more errors. Now I’m making the whole deployment to see the final partition sizes in Windows enviroment.

Thank you very much!